Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Diagnosing a (new to me) 2-stoke engine for trouble
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
Underdog
Joined: Oct 18, 2008
Points: 332
|
|
Diagnosing a (new to me) 2-stoke engine for trouble
Original Message Mar 16, 2010 9:22 am |
|
How do you diagnose a 2-stroke to find out if someone ran straight gas through the engine and wrecked it? I found a Toro snow commander snow thrower (see photo). I've never used a toro single stage so I thought I would snatch it up. The previous owner said that it did not run. Apparently it ran last year but not very well. Looks like it sat out in the rain most of its life. That's all I have to go on. At 24" the blower is wide for a single stage and very heavy (over 100 lbs). The 7hp engine appears to be the same InTek 2-stroke as the Toro 3650 and 2450. I noticed that it does have an electric start feature. Now that the blower is sitting in the garage, I realize how large it is. Think "single stage monster." A very odd beast, a mass of red plastic. Toro only sold these (model 38602) blowers for a few years (2001, 2002, 2003, ?) with a list price of $960 US. There was a Toro recall in 2006 for 2001 and 2002 models. This one is a 2003 model. I don't think they were very big sellers (expensive, hard to handle, too many parts). I don't have any experience with 2-strokes so this is a new adventure for me. Is there an easy way to determine if someone ran the engine with regular unmixed gas and ruined the engine? Would I notice anything when pulling the starter cord? I thought I try to rule that out first if there was an easy way to do so.
This message was modified Mar 16, 2010 by Underdog
|
|
|