Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I know this is neither the season nor the OPE that comes to mind in the dead of winter but I am looking for advice on the purchase of my first chainsaw. Giving the thoroughness of the reviews of snowblowers, I believe the same expertise is there for other OPE's such as chainsaws. Looking for a chainsaw for home use that includes managing timber on my property and maintaining an adequate supply of firewood. No problem splitting the wood with a wedge and sledge. I understand Stihl is outsatnding quality and friends recommend that I get a 20 inch bade. I would expect to use the saw 2-4 times/year. Beyond that I'm looking to see what other say with respect to size, manufactures, model numbers, etc. Thanks in advance. Chris

ROFLMFAO

Bill D, you squeeked by on that Avatar, OPE related and no bare necessities showing. You're a clown! 

Edited the P*rno, don't need to be coming up on any of those internet searches.

16 to 20 inch bars are ideal, or you might consider an 18, the longer bars mean you have to bend over less say in a limbing scenerio, ive got a poulan and a stihl of equal size, the stihl's lighter but uses more gas. if you go with  a midrange size saw, .325 chain will work fine.....the larger (horsepower) saws should have a 3/8 chain. what ever saw you buy be sure it has  anti vibe handles, as the vibration from a solid handled saw is murder on the hands and forearms.

I like my 270 Woods Boss from Stihl.     But, the most important thing about saw long life, no matter what the brand, is DO NOT LET ANYONE USE IT BUT YOU - ESPECIALY FAMILY! 

My dad did not let me take his saw from his sight, because some one could drop it, bang it, saw rocks, saw dirt, saw stones, use the wrong mix, and never tell you about it.  Don't use anyone elses saw lest they blame you for its problems.  Happy shopping.

                                                                                       18 degrees

Wrecked - Echo is an excellent saw & always comes to mind anytime anyone asks for a recommendation. Many tree service guys in my local area use Echo's. If needed, parts are easy to get. As SpottedPony mentioned, an 18" bar is a good compromise for bar length & even 16" would suit most of your needs.

Marty

Please click here for information regarding Stihl Chainsaws

Hi Wrecked

Welcome,    I was in the same boat as you when I bought my Echo.  Check out my review

My only complaint about it being sometimes hard to start, is probably an adjustment problem which I need to have looked at (while its still under warranty).
Once its warmed up, it restarts easily.

I would highly recommend this saw for your use.  Its big enough to work all day, yet small enough that it won't wear you out.

Good luck in your hunt!

Emmo

Wrecked - To narrow the field, which saws are you currently looking at?

A 20" bar does not necessarily  indicate the power or performance of a chainsaw.  For cutting firewood, I prefer a 16" bar due to the safety factor of keeping the kickback area of the upper bar tip from contacting solid objects.

While I have Husky, Jonsered, Stihl & a collection of older Homelites, I prefer the Stihl's for any serious cutting, especially in hardwoods.  The Stihl chains are the most durable, in my opinion.

I have a Poulan 3400 Countervibe that I bought in the early '80s. Still starts and runs great and have had to do no repairs at all. I don't know however, if the quality of the brand has dropped off in the past 20 years.

Majorxlr8n wrote:

my first choice is still the 20"  on my saws (old poulan 3300 & stihl 026) it seems the 20 balances them better for me.  it gives me a bit more reach without bending quite so far. a fact my back thanks me for after several hours of cutting. in all honesty i have both 16 and 20 inch bars for both saws, & i keep a 16 on one and 20 on the other.  i like the 16 when cutting logs laying on the ground because particularly with timber under 12 inchs or so its easier to get the end of the 20 inch bar into the dirt dulling the chait. for anything over that or limbing a down tree i prefer the 20. A 16 inch bar & chain, will use a bit less horsepower although ive never noticed a lack of power on either saw going between 16 and 20. another advantage of the 20 inch with the longer chain  is there are a few more teeth so with every revolution of the chain the saw cuts a bit more and the chains seem to stay sharp a little longer.

What ever saw/bar combination you decide upon, pick the one that feels and balances best for you & to get the best performance learn how to sharpen  the chain properly. either with one of the file systems available or an electric sharpener (my preference) file the rakers occsionally checking with a raker guage,to maintain proper cutting depth of the saw teeth and keep the chain properly tensioned.

wrecked wrote:
There's never a wrong time to buy a chainsaw :)

Were i you, i'd go with a 16" or 18" bar.  20" is darn long when that sucker is spinnin around.  Also, it's easier to ground a longer bar than a shorter.  One of the nice things about a long bar though is the kickback zone of the bar will be further away from you(and what you are cutting) when you are cutting right up tight to the saw body. 

Now, just a few months ago, i too was looking for a saw for about the same amount of use you seem to have(but i don't have a fire place) and i ended up with a craftsman 18" 42cc saw for 200 bucks with tax.  So far, i've done alot of  limbing in the 4-8" range, i've dropped a pine, cut down a huge "tree bush" in our yard and processed it,  done limbing for friends and family (i second the note about not lending your saw to anyone- ever) and I have to say the lil bugger is a tough little saw!  I've prob got a little over 20 hours on it, and it's really nice to use.  It has a quick style chain tension adj that's neat to use once you get the hang of it, and it has anti vibe handles that make it a dream to use.  I would have liked to have gotton the same size stihl(def my fav saw) or husq or echo, but I couldn't afford it.  It was either use my cordless recip saw(which is quite handy for trimming high up) or buy the craftsman.  If i'm not mistaken, the craftsman chainsaws are made by poulan.