-
Featured Products
What's the Best
-
Vacuum Cleaners
-
Contact Us
-
Privacy Policy
Welcome, Guest. Please
Login
or
Register
.
Forum
›
General
›
Vacuum Cleaner Forum
(Moderator:
Mike_W.
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
3
4
Dirt Devil Spinnergy - Here today, gone today... (Read 1491 times)
guess_who
Junior Member
Posts: 29
Re: Dirt Devil Spinnergy - Here today, gone today.
Reply #20 -
07/01/07 at 10:31am
Hi Carmine,
I have always thought that getting back to designing vacuums that concentrate or utilize air airflow more efficiently while relying on less wattage draw is great. AND it's already been done in past so it can't be claimed an impossibility.
The Oreck upright does do all at that by making the airpath from the floor to the fan chamber short, sweet and uncomplicated and it uses amply sized dust bags to promote better airflow as they fill.
My question is, what do we do to get the buying public to be less energy hungry? Is there any way to get manufacturers to switch their pitches from illusions of power through possesing contained windstorms to clean with to more practical, easily explained reasons why you can do just as much with less? High wattage/amperage claims are still used to influence vacuum buyers and they appear to be winning. We also have cars that are fuel efficient but there remains a glut of vans, etc., out on our roads.
During my time out of the country, one of the first things I noticed was more careful use of energy. At first I pigeon-holed it as due to there being a more practical mindset in Europe. Then, duh, I later realized that, mindest or not, electricity could be comparatively far more expensive in other parts of the world than mine and people were merely doing what they could to save money. For instance, I stayed at a home in Spain where a small wall-mounted tank style hot water heater was only switched on for morning showers and breakfast dishes and turned off again until dinner time came to keep the bill down. Though the unit could have only contained ten ot fifteen gallons, to have it on on day and night could prove catastrophic budgetwise.
I also visited many hotels and homes that used gas or elctrically powered "instant" hot water heaters as opposed to large capacity units like ours that run 24/7. Devices like this are available here, if wanted, and might well save a lot of people a lot of money but there appears to be little interest in them. We're pretty hard-headed here. But as Granddad said, " A hard head makes for a soft you-know-what."
Venson
Back to top
IP Logged
old-timer
Ultimate Member
I love YaBB 1G -
SP1!
Posts: 1223
Re: Dirt Devil Spinnergy - Here today, gone today.
Reply #21 -
07/01/07 at 11:22am
Hi Venson,you make an interesting point about consumption,lets look at the other side of the coin.Has anyone ever noticed that the more energy efficient a product becomes,[automobiles],the more it costs to operate it, I realize that there are many more cars on the road today than years ago,but the cost of fuel and the tarrifs that are tacked on more than negate any real savings to the consumers,your government at work''.
O.T.
Back to top
IP Logged
Carmine_Difazio
Ultimate Member
I love YaBB 1G -
SP1!
Posts: 5559
Re: Dirt Devil Spinnergy - Here today, gone today.
Reply #22 -
07/01/07 at 12:55pm
M00seUK:
Thanks for the clarification on your meaning of "timeframe" in the post.
OldTimer, Venson:
I mentioned previously that GM hired 400 engineers to completely revamp its entitre fleet of vehicles across all divisions to make them more fuel and energy efficient. I think that's a start.
With regard to vacuums and other home appliances, I think consumers will pay a premium if the product accomplishes the same job in less time. I have to say ORECK is ideal for this goal. Why? I can vacuum all the floor surfaces in my home in less time with an ORECK than any other vacuum and/or combination of vacuums. And not worry about the daily/weekly time to dump a dirt bin and/or change paper bags frequently.
I have just passed the second full month of daily usage with the same ORECK paper bag still on board. And there's still room to go and the vacuum doesn't miss a spec, not even a lone pet hair. Get's it all in less time than the other more expensive, less energy efficient and heavier vacuums.
Since I'm not a "tool" man when it comes to the above the floor cleaning, preferring the old fashioned ways of hands and dust clothes, I don't miss not having attachments on board. In fact, I find them more time consuming and less efficient than the dust cloth--swiffer hand methods.
Carmine D.
Back to top
IP Logged
guess_who
Junior Member
Posts: 29
Re: Dirt Devil Spinnergy - Here today, gone today.
Reply #23 -
07/01/07 at 1:13pm
Hey O.T.,
How goes it? I think we are all going to have to begin to educate ourselves more about the working of things since we can be sure that business and government more than likely will not. Along with self-education we'll also need to learn to say, as I've said so many times, "Uh-uh, I can't use that," and point out, "This is what I need instead." That's what I think.
However, there's the rub. Not enough of us can see our way clear to saying no and putting our foot down about what's acceptable for money we're expected to willingly spend. It would be splendid to see more people vociferously letting it be known that they may well make do with what they've already got We've got libraries and even better the internet where you can dig for just about anything you want to know to help us get useful information about how things are made and how much they cost in the making. From such information most folks, even I, horrible mathematician that I am, should be able to get an idea of what a fair price should be and what is should not.
Money spent or money withheld, which maybe even wield more power than the vote, usually has a lot to do with which way the reins of this country get tugged. The sad part is that we don't seem to wax to cohesive or sensitive frame of thought until some tragedy occurs to haul us into line. As far as issues of pollution, consumption and conservation are concerned, we'd be far better served to become adamant now than to later be forced into action by the result of our own willfull neglect. It would a good thing to get ourselves set up with a new modus operendi before, as with some places in the world, running water is only available x-days a week to specific blocks and must be stored for use in between; before power is either limited or unreliable because of brownouts and blackouts; before running to doctors who will probably not be able to do us much good in respect to ills brought on by bad air.
Is there hope? Yes. Grandad's daughter, my Aunt Lucy said, "You can do anything you want -- you just have to want to do it."
Regards,
Venson
Back to top
«
Last Edit: 07/01/07 at 2:41pm by guess_who
»
IP Logged
guess_who
Junior Member
Posts: 29
Re: Dirt Devil Spinnergy - Here today, gone today.
Reply #24 -
07/01/07 at 2:40pm
Hi again,
The following link may be of interest to persons who are looking for ideas on how to improve their use of energy.
http://michaelbluejay.com/electricity/
In our case, a vacuum cleaner, giving consideration to average use, is not much of an expense though I think makers should get on and stay on the energy-efficient band wagon.
As regards othere areas where cost is more substantial, personally, I've been using compact flourescent light bulbs for some time and for the money spent have gained a great deal of value as they last a long time. I'd tell you how long they last but it's been so long since I changed the last one I don't remember.
I noticed a page from the link above regarding the spin dryer, a practical appliance more known to Europeans than Americans. Considering the expenditure to buy one, savings can be really something. Per the site, a couple minutes of use before placing your laundry into a regular clothes dryer can save approximately thirty mniutes of drying time per load.
Venson
Back to top
IP Logged
old-timer
Ultimate Member
I love YaBB 1G -
SP1!
Posts: 1223
Re: Dirt Devil Spinnergy - Here today, gone today.
Reply #25 -
07/01/07 at 4:42pm
Thanks Venson, Carmine.
Another thing that really bugs me is why is a computor considered OBSOLETE after 1 year old and you cant buy parts or have it repaired,is this considered as innovative thinking.................
O.T.
Back to top
IP Logged
guess_who
Junior Member
Posts: 29
Re: Dirt Devil Spinnergy - Here today, gone today.
Reply #26 -
07/01/07 at 6:12pm
Ho O.T.,
In this, we may be saved -- for the moment. Computers can be built and rebuilt. There are entities who do this. I am thinking on having my next new desktop built from the ground up. The actual amount for paid for the assembly work is not unreasonable. However, the components, processors, motherboards, drives, computer case, power supply, etc., are for you to choose and cost in total whatever you feel you'd like to spend.
Try thew following link -- http://www.buildyourown.org.uk/pc-building/
If you can pick up computer components at reasonable prices, often a thing you're better served to comparison for yourself, you may have a product valued, rough guess, at twice the price. I was at Best Buy and off-the-shelf prices offered got my dander up so I started searching the web and began starting to school myself about building my own.
With the right information, anyone can do this. Basically, you have to learn which parts are compatible with which parts and your planned on operating system. Contrary to my thinking, there are no parts that requiring any soldering. Most, even PC cards, easily screw or snap into place. I wish it was as easy to build my own vacuum cleaner.
Best,
Venson
Back to top
IP Logged
Carmine_Difazio
Ultimate Member
I love YaBB 1G -
SP1!
Posts: 5559
Re: Dirt Devil Spinnergy - Here today, gone today.
Reply #27 -
07/02/07 at 7:26am
Quote from guess_who
on 07/01/07 at 6:12pm:
I wish it was as easy to build my own vacuum cleaner.
Best,
Venson
Too bad vacuum makers don't allow buyers to customize their vacuum cleaner purchases. Consumers would pay a premium if they could decide what they get for their money rather than same same.
Carmine D.
Back to top
IP Logged
Trilobite
Senior Member
I love YaBB 1G -
SP1!
Posts: 164
Re: Dirt Devil Spinnergy - Here today, gone today.
Reply #28 -
07/04/07 at 7:31pm
Quote from guess_who
on 07/01/07 at 2:40pm:
Hi again,
The following link may be of interest to persons who are looking for ideas on how to improve their use of energy.
http://michaelbluejay.com/electricity/
In our case, a vacuum cleaner, giving consideration to average use, is not much of an expense though I think makers should get on and stay on the energy-efficient band wagon.
As regards othere areas where cost is more substantial, personally, I've been using compact flourescent light bulbs for some time and for the money spent have gained a great deal of value as they last a long time. I'd tell you how long they last but it's been so long since I changed the last one I don't remember.
I noticed a page from the link above regarding the spin dryer, a practical appliance more known to Europeans than Americans. Considering the expenditure to buy one, savings can be really something. Per the site, a couple minutes of use before placing your laundry into a regular clothes dryer can save approximately thirty mniutes of drying time per load.
Venson
Front-loading automatic washing machines sold in the UK, tend to have spin speeds upwards of 1000 rpm. Typically, 1200rpm is common, as are 1400 and 1600rpm machines. There are even 1800 rpm and 2000rpm washers available; the latter two are from Miele and Gorenje, respectively.
A larger drum diameter allows a slower speed to achieve the same extraction efficiency as a smaller drum, at a higher speed.
Back to top
IP Logged
guess_who
Junior Member
Posts: 29
Re: Dirt Devil Spinnergy - Here today, gone today.
Reply #29 -
07/04/07 at 11:27pm
Hi again Trilobite,
Hurrah for Europe! I think that those parts of the world that didn't start out with oil wells in the back yard have always had to be sensible -- and inventive -- regarding matters of consumption. We need a quick awakening here in the land of plenty before the plenty runs out.
What amazes me is the lack of vision we often seem to be devoid of as of late -- and possibly on purpose. Born and bred in this country have been some of the most agile and adept minds in all manner of technological fields and business. So what happened? While I am never at a loss to hear how to invest money or how to spend money I don't have, I seldom see product or hear advice that informs me merely how to keep the money I've got.
Yep, there are washing machines to be found that not only have high speed spin cycles but that also have the ability to heat water. There are also dishwashers that without requirement of a hot water heater can heat water per needed cycle and can produce perfectly clean dishes. Unfortunately, those makes and models that might allow us to turn down the thermostats on our 24/7 hot water supply come at premium prices here. They run near and often well above the $1,000 mark though it's highly doubtful that they cost beyond half that to manufacture.
What explains the cost? Is it because their makers know of and deliberately plan to cash in on the consumer's anticipated savings before they get the chance to to even look at the money? Is it because the quality of their product is actually so exemplary that it's makers are surely due top price? I don't know.
As far as laundry goes, I do know that a long while back coin-operated spin driers were often available for use in self-service laundries here in New York. They were used to extract water that the spin cycle of the automatic washer failed to. You paid very little money to use one and they did significantly cut the time and expense of regular dryer use. It's been way more than thirty years since I last laid eyes on one in a laundromat.
We are in need of energy and money saving devices that are accessible to everyone if we are to sucessfully move toward saving energy, water and good air.
I am not saying everyone should expect to have an expensive high-end Miele, Bosch or whatever in their household. What I am asking is that, since there's always more than one way to skin a cat, that affordable useful stop gaps begin to come into the market. A spin dryer is far less complicated machine and wouldn't cost nearly as much as we'd pay for a high-speed spin imported washer with x-amount of special cycles and it would probably prove a greater help. So why aren't they being made readily available? I have not been away in a long time but in past this was a common item on the European market.
Why don't we have have clothes washers that only have to hook up to a cold water line? Again I don't know. I do know that the larger part of the public ends up buying $200 to $400 models that are far less efficient because more efficient devoces just won't fit their budget. We need to begin to insist on product that may not necessarily fit our our bell and whistle requirements but the needs of the moment.
Venson
Back to top
«
Last Edit: 07/05/07 at 1:04am by guess_who
»
IP Logged
Pages:
1
2
3
4
Forum
›
General
›
Vacuum Cleaner Forum
(Moderator:
Mike_W.
)
‹
Previous topic
|
Next topic
›
Forum Jump:
-----------------------------
General
-----------------------------
=> Vacuum Cleaner Forum
Forum
» Powered by
YaBB 2.1
!
YaBB
© 2000-2005. All Rights Reserved.
Home
-
Buying Guide
-
Forum
-
Reviews
-
About Us
Copyright 1998-2007, Whats The Best, Inc. All rights reserved.