Vacuum Cleaners Discussions

http://gizmodo.com/345918/dyson-dc24-vac-sir-james-brings-his-ball-back

Two models, one small, one large :-

DC24
http://www.dyson.co.uk/store/product.asp?product=DC24-ALLFLOORS

DC25
http://www.dyson.co.uk/store/product.asp?product=DC25-ALLFLOORS

I have been looking up the specs of both machines, and I have been curious about several things. First off, the DC25 USA and UK counterparts share the same air watt rating of 220, however, the USA DC24 has only 110 AW in comparison to the UK DC24 AW rating of 220.

Also, the clear bin on the DC25 looks to be about the same size as the clear bin on the DC18, however according to the specs, the DC25 only holds .34 gallons of debris, less than the DC18's .44 gallon capacity. Has Dyson done something inside the canister to take up some space, I.E. - widen the center chute to squeeze in some sort of inner core separator cyclone? This could be the case, but it seems they won't go as far as to point it out on the Dyson online store; in the UK online store, the DC22 that DOES have Core Separation Technology is only said to have Root Cyclone, with a detailed image of a regular Root Cyclone assembly to accompany it.

And aside from that, why is Dyson keeping the Level 3 tech exclusive to the DC17? I mean, how hard is it to slap on the DC17 clear bin onto a DC25? Perhaps the Level 3 assemble would have added extra weight, and they decided against that (the DC17 is a 33 lb. machine after all).

Dyson definitely needs to start expanding their Core Separation line in order to stay ahead of the game.  The Root Cyclone technology is still very good, and has brought them to where they are now, but it's not the end.  I'm hoping they bring the DC22 here and give it the DDM and an electric power nozzle...we would then have both an upright and canister with the Level 3 system.  Until I looked at the Dyson UK website, I had no idea that they did not have any other Level 3 machines, and that the DC22 "Baby" was the first; however, that does make sense as I remember the DC17 was designed primarily to clean thick American carpets. 

-MH

The DC24 on the UK website has been changed to AW120, I'm sure I saw it originally at AW220 to start with.  On the UK Dyson web the bin capacity is 1.4 litres for the DC25 (0.85 litres for the DC24) compared with 1.7 litres for the DC18 Slim.  Although the bin capacity for the DC25 is smaller to the DC18 it looks wider looking at web pictures with the shroud filter bigger on the DC25.   I can not see any core cyclone technology being on the DC24 and DC25!  Both use root 6 - DC24 and root 8 DC25 for a guess!

The Core (level 3) is not exclusive to the DC17 as the DC22 in Japan and the DC22 Baby (UK) both have this technology as well although the Dyson UK web does not say it does for some reason!  A UK catalogue retailor features the DC22 Baby and mentions the core technology.   Putting this technology on thse 2 models may have increased weight plus Dyson may not have developed a scaled down version of this technlogy as yet!  No reason why it can not be achieved!

DC18

Motorhead wrote:

Mine works perfectly for both.  Maybe its the handle grip on mine.  I have the old conventional grip that goes all the way down to floor/rug.  In the complete prone position, for under bed vacuuming, the Oreck is on the same level from the rug nozzle to handle grip.  Perhaps, this would not be the case with the ergonomic loop grip.  I don't know since I haven't used it. 

Carmine D. 

DC18 wrote:
It appears they already have with the DC22; look at how small the entire machine is compared to the DC21 (with the cyclones twice as small). I don't see why they can't design a collection bin based on the DC22 bin for an upright, that is slightly taller, with fewer cyclones. I really don't think Core Separation needs a DDM, especially if it will work with a 200AW DC22 canister and a 220AW DC17 upright with standard motors.

On a side note, does anyone know if a Japanese appliance (I.E. Dyson DC22 DDM Motorhead) will work with American outlets?

iMacDaddy wrote:
Not unless you use a step-down transformer; the voltage in Japan is only 100 volts.  I know a higher voltage will ruin the DDM's control board and possibly take out other components with it...

Hi all,

Can't say that I buy into it but here's Lord D's spin on things:

http://www.telegraph.co.uk/news/main.jhtml?xml=/news/2008/01/18/ndyson118.xml

Best,

Venson

Hello Venson:

Thanks.  I don't buy into the dyson drivel.  Couple of things I noted:  First, no prices indicated.  Second, no mention of the launch of the baby dysons in the USA at the VDTA next month.  Why?  The jaydee of years past would have publicized the dyson USA launch at least one month in advance and more likely months in advance. 

In the USA the baby dysons may do okay depending on the price.  Jaydee's philosophy is mark them up as high as possible.  DC18, a lite version of the dyson uprights, for $469.  BBB and LNT have it right.  They typically sell the DC18 for 20 percent off or about $100.  Still despite Airblade's mention years ago that this practice upsets dyson not to mention the retailers who take it on the chin with the dyson MAP.  $369 should be the retail for the DC18 before discounts.  Look at the DC16 for $149.  A joke. 

Baby dysons should also be baby prices not full prices.  But knowing dyson, if and when they come to the US, dyson will mark them up too high.  Even in the best of economic times, US consumers wouldn't give them a second look at the high prices.  Compound the situation with a recession, and vacuum buyers will think: What is dyson thinking? 

Carmine D.

  < DC24 & DC15 side by side.  For those who do not "Nail Their Dyson's To The Ground", enjoy.  Enlarged view here.

Amazon UK.  Here and here.

Super hi-res photo of the above here :-

http://item.slide.com/r/1/0/i/_E55sox20z_cmTYdGuOKk_93RdR3PuZB/

It shows it's construction looking a lot more simplified.