Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I changed the engine oil in a Toro 421Q snowblower.  First time at 2.5 hours, then again at 5 hours, per the manual recommendation.  I noticed both times there are glitter specs in the oil.  The engine is a Loncin 163cc engine.  Is it normal to continue seeing glitter specs at the second oil change? 

My other engine is a Honda GX340 which I changed the oil a couple times since new and did not see any glitter. 

No reference to how many or much which would be very difficult to determine or describe.  You may see "specks" for a long time.  I'd tank the oil in a clear jar and see what it looks like in a week or two.

Well, I'm not too overly concerned.  Looks like they're fine enough that they won't be a big issue.  Maybe they'll act as lapping compound to help hone the cylinder smooth.  I'll just change the oil again at +2.5 hours. 

Anyways, I'm glad I switched back to conventional motor oil.  No need to waste synthetic oil trying to flush/purge the metal glitter bits.

Pretty normal as the rings and to some extent the bearings wear in.

CharlesW wrote:
So far, this Chinese engine has performed better than my expectation.  Fuel leaks is fairly minor, I dealt with the problem temporarily until Toro respond with a proper fix.   It could be worse.

aa335 wrote: The 421 has done a great job for me as well.
It's my first single stage machine and so far it has been pretty impressive.
Like you, I have no real complaints about the Chinese engine, no gas leak or any other problems, but I am still not as comfortable with it as I could be.

FWIW, The mechanic at my local dealer told me that other than the carburetor recall, he has not had to work on any of the Toro Chinese engines.
Also, none of the 20 or so 180s he did the recall on was actually leaking when they were brought in.
Just a little more info, the carburetor is removed and if it looks new and pristine inside, it gets a new needle only. If the carburetor has gunk, rust. or shavings in it, a new carburetor is installed.

To me, the gunk and rust sounds like classic ethanol problems. The alcohol collects moisture and that probably causes the rust. The gunk residue is also pretty common when ethanol gas is used.
I can still buy "pure" gas and I avoid ethanol blends in everything I own.

trouts2 wrote:
I was just reporting what I saw and see if anyone else has similar observations.  I guess I could go through the trouble of quantifying the metal glitter via RMS, pmm, or % weight, but most of the audience here wouldn't really care.

I'll change the oil again +2.5 hours and post what I found then.  Hopefully, it should be glitter free by the third oil change.

nothing to worry about, completey normal.....l would say u could easly see "glitter" for the next 2-3 oil changes. and yes the "glitter" will stick to the crank case so make sure the engine runs for a good ten mins then change right away while still hot. l would change it at least one more time before the season out.

"To me, the gunk and rust sounds like classic ethanol problems. The alcohol collects moisture and that probably causes the rust. The gunk residue is also pretty common when ethanol gas is used."

I doubt it. 

Not to go off topic, but the ethanol issue is way over-blown and from my experience, ethanol is taking the rap for contaminated fuel. 

Think about it.  If 10% ethanol was as bad as some people claim it is, every second vehicle on the road would be out of commission due to fuel issues.   Bad gas is far more of a problem than ethanol.  Any problems I've had with fuel is water/dirt in it coming right from the pump.  In all of my years using/working on multitudes of machines, and opening up carbs, I've yet to come across any obvious deterioration caused by ethanol. 

CharlesW wrote:

I'm trying to grasp how rust could be formed if the alcohol in the ethanol collects moisture.  If the alcohol is hydroscopic and absorbs the moisture, that deprives rust of moisture, how does rust continue to form? It's like starting a fire, you need three things to get it started and keep going.

Anyways, a little off topic too, but until we know more of the plausible root cause(s), I wouldn't want to place the blame on ethanol and/or Chinese engines.  As much as I hate losing our jobs to another country that is more than willing to do it at a fraction of what we demand here, there are people here who made short-sighted decisions to outsource overseas to appease investors and stockholders quarterly reports.  Don't blame the Chinese, they have as much drive as us progressing through the Industrial revolution in the US years ago.  Instead of blaming, how about a restrospective look at our spending habits and penchant for cheap consumables?  If you want to buy products cheap at discount stores, how many Americans are willing to produce it?

Sorry to get off topic and going political.  But every problem has multi faceted root causes.  I've done my fair share of failure analysis and if anyone think they found a smoking gun without data to back it up, they're just a clown with an opinion.  Sorry, but not all white papers are unbiased truth.  They can be bought and sold just like any fiction books out there.

Off my soapbox now.  Back to our regular topic.  :)

For Borat and aa335.
While I don't really understand everything I read on the subject, it seems like an awful lot of people have misgivings about ethanol blended fuel.
The article quoted below is just one example. You can find literally hundreds that say basically the same thing.

Buried in there is an explanation as to how the alcohol and water will cause the rust problem.

As far as the ethanol boosters claim that it has no ill effects on modern day vehicles, check out the 2006-2008 Lexus recall for ethanol corrosion of fuel systems.
2006-2008 probably could be considered a fairly modern day vehicle.

Anyway, here's part of the article I was referring to.

Water Attraction

Pure ethanol has a strong ability to absorb water from the atmosphere around it. This is true also of the blends made from pure ethanol and gasoline. Ethanol has such a strong attraction to water that chemical producers cannot even sell 100% pure ethanol - it is always 99.8% or less, because there will always be at least a tiny bit of water. As you may expect, attraction of water is an even bigger problem for marine users of E10-E85 than it is for on-road drivers.

When water accumulates in a fuel or storage tank, it sinks to the bottom of the tank because water is heavier than fuel. It then contributes to a whole host of fuel problems and issues, which can be summarized here:

Breeding Ground for Microbes

Microbes like bacteria and fungi all need accumulated water in order to grow and thrive in a fuel storage tank. If an infestation takes hold, problems with corrosion, filter plugging and reduction in fuel quality can follow. However, ethanol blends, like gasoline, tend to be used quicker than stored diesel fuels, so this is not so much of a problem in actual practice.

Phase Separation

Phase Separation means the ethanol 'phase' separates from the gasoline 'phase' and results in two layers of two different compounds, instead of a homogenous mixture of gasoline and ethanol. At this point the ethanol will sink below the gasoline phase and mix with any more accumulated water, giving an ethanol-water phase mixture.

Loss of Octane

When ethanol separates from gasoline, it causes a loss of 2-4 octane points in the fuel mixture; in effect, as it separates, it drags the octane value of the gasoline. An 87-octane fuel that separates can have its octane rating drop to 83-84, which is unsatisfactory for most vehicles and will cause performance issues.

Potential for Equipment Damage

An ethanol blend that has separated will have the ethanol and water mixture settled at the bottom of the tank, where the fuel line is. The fuel line potentially can suck this mixture up into the combustion chamber, where it will burn like an overly lean mixture (lean = not enough gasoline). Because it is not mostly gasoline now, burning this kind of fuel gives real potential for valve damage. This becomes an expensive proposition.

Oxidation and Deposit Buildup

Water is one of the impurities that will accelerate oxidation reactions in any petroleum-based fuel, whether gasoline, diesel, biodiesel or ethanol blends. Oxidation reactions are responsible for fuel stratification and the fallout of heavy ends from the fuel mixture. These heavy fuels can build up in the bottom of a fuel storage tank, and when they are injected as fuel, they do not burn like pure fuel but will leave deposits in all parts of the combustion system - combustion chamber, valves and fuel injectors. At best, you get raised emissions to the catalytic convertor, rough running and poor engine performance, while at worst you get a drop in mileage.

Ethanol Solvency

Boat owners in the northeast can readily testify how ethanol blends up to E85 attach and dissolve rubber and plastic parts, even fiberglass fuel tanks. Ethanol has always been an excellent solvent and unfortunately this is not a good thing for engines and fuel delivery systems which rely on rubber and plastic parts for their function. Repeated exposure over time will cause the plastic resigns to dissolve in the ethanol; they subsequently build up as new deposits on valves, causing the same kind of performance issues as carbon deposits can.