Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Purchased Mr. Funnel F3CN

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:

Richie

Bring On The White Stuff

Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562

Purchased Mr. Funnel F3CN
Original Message Jan 27, 2005 8:44 am

Hi Fred,

I couldn't find the thread on this list when this subject came up a few days ago, so I thought I'd make a new one. I saw the Mpeg on their website you sent me to and thought it was great. It almost seems too good to be true how well this works. I should have it in my hands in a few days and you can bet I'm going to demo it for myself just as they did in the Mpeg. I think I'll be leaving out all the debris in my test, but will certainly try the "water" trick. Thank you again for recommending it to me

Richie

Replies: 11 - 20 of 31

All

View as Outline

Marshall

As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: Purchased Mr. Funnel F3CN
Reply #11 Jan 27, 2005 1:20 pm

Richie wrote:

He must have done a good job of pushing these items. Now I remember how PRI-G ended up in my garage, and have been using it ever since

The difference is that I love Honda and really wanted a 724, but the two or three Honda dealers in my area here, in New York ,treated me terribly and made it seem like they were doing me a favor to even answer a single question. You may actually recall way back I mentioned to the forum that I had gone into a dealer, didn't see a single snowblower and asked, "do you have any snowblowers I can look at" The response I got was, "you come in here to buy, not to look. Pay for it and when it comes in, you can look at it" I'd never recommend one, ONLY for that reason. I could never send someone with $2,000.00 in their hand to a dealer like that, to be treated so horribly.

The old arogant as*hole approach huh? Never worked on me either. LOL

Dave___in___CT

Deliberate often...
...decide once...

Location: West-Central Connecticut
Joined: Sep 17, 2002
Points: 3159

Re: Purchased Mr. Funnel F3CN
Reply #12 Jan 27, 2005 5:51 pm

In memory of Bobby P... and his convincing posts...

First... I started using Pri-G and PRI-D...

Next... was a Mr. Funnel...

Finally... I got a Honda FG100 mini-tiller...

Dave...

Whether you think you can or you can't... you're right.
Henry Ford

BCS Tractor & snowblower

Termy

Location: Washington
Joined: Oct 24, 2004
Points: 960

Re: Purchased Mr. Funnel F3CN
Reply #13 Jan 27, 2005 5:56 pm

I feel bad that BobbyP left us. He was really cool and gave great advice. I just hope he finds whatever he is looking for in his life. I am hoping he will come back. Well, if he does, we all will bennifit from it.

AJace

I have an Ariens 926 Pro because I like Orange

Location: Near Gettysburg
Joined:
Points: 969

Re: Purchased Mr. Funnel F3CN
Reply #14 Jan 27, 2005 7:06 pm

Yes, I hope he comes back also. He was a great guy.

It bought a filtered funnel when I went to pick up my mower blades recently. I should have read more about Mr. Funnel, because it is better than just a filtered funnel.

Ariens 926 DLE Professional; Toro S200; Craftsman LT1000, Echo ES-230;

TomP

Once you go Mac you never go back!

Location: Central New Jersey
Joined: Aug 4, 2003
Points: 648

Re: Purchased Mr. Funnel F3CN
Reply #15 Jan 28, 2005 6:17 am

I bought a Mr. Funnel and find it to be a pain to use.

Do you fill the fuel tank directly? When doing so I find it very difficult to see how full the tank is and have overflowed it on more than one occasion. The fuel tanks on my single stage blowers are small so you need to be careful when filling them. Using the Mr. Funnel makes seeing the level harder and I have needed to use a finger to stop the fuel in the 1/2 full funnel when the blower tank is full.

The only successful way I found was to dedicate a fuel can as "clean". Only filtered fuel goes into the can. Then I use this can to fuel the equipment.

It would seem to be a good idea to build a Mr. Funnel fuel can. This would eliminate many of the handling issues.

Snow Team:

Simplicity 1060 DLXE - Toro Snow Commander / 3650 - Honda HS520

Richie

Bring On The White Stuff

Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562

Re: Purchased Mr. Funnel F3CN
Reply #16 Jan 28, 2005 8:53 am

Hi Tom,

I'm glad you posted that because I realized this just prior to ordering it. Like you, I hate filling a fuel tank and accidentally over filling it, just to spilling fuel all over the place. My gas can is one of those larger 5-6 gallon plastic types. I also have a spare one that I keep in the garage also. I figured after I fuel the can up, I was going to take it home and install the funnel on my spare can and pour the fuel into that one rather than use the funnel directly on my OPE. I don't know if this defeats the purpose, because I don't know how much, if any, these fuel containers attract water just by sitting around. This is my solution, hopefully a good one.

What I don't like about my TEC engine is that I recently switched it over to Mobil One 5w-30. There is only about 40 minutes of time on the oil due to this recent storm here in New York. But I noticed that the rubber breather tube had some white goo dripping from it (obviously water mixing with oil) and when I checked the oil, this same goo was on the top half of the dip stick. When I see this, I just wipe it off. Given the fact these carburetors are completely open and always exposed to the elements, and maybe the breather tube as well, I really don't know if this water or condensation issue can truly be eliminated. Not to mention the fact these winter fuels really attact water by their very nature.

I thought of running the engine for a short while each day to burn it off, but that really isn't a viable solution to me, not to mention putting needless hours on the engine.

Richie

Emmo

Joined: May 22, 2003
Points: 1065

Re: Purchased Mr. Funnel F3CN
Reply #17 Jan 28, 2005 9:20 am

I initially found the funnel to be a pain to use as well, but kept telling myself that it was worth it. Eventually I got the knack of using it, I just pour slowly and keep a watchful eye and ear for the fuel filling to the top.

I think its important to use it at the point of fueling the equipment, rather than at the gas pump, due to the moisture issues. Filtering at the pump certainly would take care of the dirt, but it's the sitting around in the garage that is 90 F today and is 5 F in 2 weeks that concerns me. I keep a small stash of fuel around for my portable generator and I do replace it every so often (stabilized with PRI). But when I see the expansion and contraction in those cans it reminds me of the variations of environment it has been exposed to. I worry about condensation, and the water getting into the fuel system of my equipt, and therefore filter just before using it.

Richie

Bring On The White Stuff

Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562

Re: Purchased Mr. Funnel F3CN
Reply #18 Jan 28, 2005 9:26 am

Emmo,

You make some very good points and something that should be considered. Thanks.

Richie

Emmo

Joined: May 22, 2003
Points: 1065

Re: Purchased Mr. Funnel F3CN
Reply #19 Jan 28, 2005 9:47 am

Thanks Richie.....

Also, like you I buy and store fuel 5 gal at a time, but I also have a 1.5 gal (for reg. gas) and a 1 gal (2 cycle gas) can that I use to fill my smaller equipment. I merely fill my little cans from the big cans. The small cans make it much easier to use Mr. Filter while I fuel the smaller equipt. Much less likely to overfill using the small cans.

Richie

Bring On The White Stuff

Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562

Re: Purchased Mr. Funnel F3CN
Reply #20 Jan 28, 2005 4:09 pm

Hey Fred,

This was the strangest thing with this Ebay seller. First, this guy had the fastest shipping I've ever seen. I was on the computer checking the tracking number, and it says it's out at my front door Then I open it up, great packaging by the way, inside was a one page instructions, the guys business card paper clipped to the instructions with $3.00 cash to boot The actual total with shipping I sent them using PayPal was $23.74. I've never heard of a refund like this, but I'm not complaining, just caught off guard. Anyway, great funnel.

Richie

Replies: 11 - 20 of 31

All

View as Outline