Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > How Big Should an Auger Be?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
DavidNJ


Joined: Sep 26, 2010
Points: 206

How Big Should an Auger Be?
Original Message   Oct 12, 2010 1:10 am
Most sub $1000 snowblowers have 12" augers, usually with 12" impellers. Ariens has 14" augers and impellers on their Deluxe, Platinum, and Professional lines; Simplicity/Deere/Snapper have 14" augers on their large frame and professional models with 12" impellers, Toro has 14" augers with 12" impellers on their PowerMax series. Honda uses 14" augers on its larger models. MTD's Cub Cadet and Sears Professional lines have 16" augers and impellers.  However the Husqvarna Crown has 12" augers of a different design.

What is the advantage of a larger auger?

Replies: 13 - 22 of 46Next page of topicsPreviousNextNext page of topicsAllView as Outline
DavidNJ


Joined: Sep 26, 2010
Points: 206

Re: How Big Should an Auger Be?
Reply #13   Oct 12, 2010 10:12 pm
Judging from the responses, no one has any insight into impeller size?
aa335


Joined: Nov 29, 2008
Points: 2434

Re: How Big Should an Auger Be?
Reply #14   Oct 12, 2010 10:12 pm
Is that going to be a 2 stage water pump?
aa335


Joined: Nov 29, 2008
Points: 2434

Re: How Big Should an Auger Be?
Reply #15   Oct 12, 2010 10:21 pm
DavidNJ wrote:
Judging from the responses, no one has any insight into impeller size?


Someone among us do know but he's not giving away the secret sauce for free.
This message was modified Oct 12, 2010 by aa335
Bill_H


Location: Maine
Joined: Jan 12, 2008
Points: 354

Re: How Big Should an Auger Be?
Reply #16   Oct 14, 2010 12:38 am
Steve_Cebu wrote:
I mean how much snow do they actually get in New Jersey anyway? He'd be fine with a Toro single stage 2 stroke


I once did live in NJ and got along fine with a Toro single stage 2 stroke. They're great on wet slush, NJ gets lots of that.

As for the original question "How Big Should an Auger Be?" I strongly recommend, based on many years of experience, that it be almost as long as the bucket is wide, but not longer than the width of the bucket.

This message was modified Oct 14, 2010 by Bill_H


Who the hell let all the morning people run things?
aa335


Joined: Nov 29, 2008
Points: 2434

Re: How Big Should an Auger Be?
Reply #17   Oct 26, 2010 5:48 pm
Bill_H wrote:

As for the original question "How Big Should an Auger Be?" I strongly recommend, based on many years of experience, that it be almost as long as the bucket is wide, but not longer than the width of the bucket.


Can't believe you gave away that trade secret for nothing.  I'd hold out for at least a quarter.

Amen, it is what it is.  Pass me the beer nuts.

On a side note, a little birdie to me that DavidNJ is now a reluctant owner of  bare bones Sno-Tek 28" snowblower.  He's having meaningful discussions with the folks on the "other forum" about shovels, Husqvarna business strategy, and the future of snowblowers.
FrankMA


Location: Merrimack Valley/Northeastern Mass
Joined: Jul 1, 2010
Points: 587

Re: How Big Should an Auger Be?
Reply #18   Oct 26, 2010 6:43 pm
Yeah, DavidNJ is over at MTF. He won't last long there if he behaves the way he did here!

Toro Wheel Horse 522xi GT, Honda HS928TA, Honda HS621AS, Honda HS520A, Toro CCR3000 (work in progress), Honda HS624WA (sold 08/23/2010), Stihl BR550 Backpack Blower, Stihl MS250, McCulloch MS1635, Honda EM6500SX Generator
aa335


Joined: Nov 29, 2008
Points: 2434

Re: How Big Should an Auger Be?
Reply #19   Oct 26, 2010 8:20 pm
So far he's been a good boy scout, although mildly analytical.
Steve_Cebu


Joined: Dec 17, 2009
Points: 888

Re: How Big Should an Auger Be?
Reply #20   Oct 26, 2010 8:28 pm
aa335 wrote:
Can't believe you gave away that trade secret for nothing.  I'd hold out for at least a quarter.

Amen, it is what it is.  Pass me the beer nuts.

On a side note, a little birdie to me that DavidNJ is now a reluctant owner of  bare bones Sno-Tek 28" snowblower.  He's having meaningful discussions with the folks on the "other forum" about shovels, Husqvarna business strategy, and the future of snowblowers.


I had stated before that he was probably going to buy something cheap and I guess that's exactly what he did. I hope it works out for him. I'm very happy with my Toro which is now back at home after an overpriced annual dealer servicing.

"If you have more miles on your snow blower than your car, you live in New England."  "If you can drive 75 mph through 2 feet of snow during a raging blizzard without flinching, you live in New England."
aa335


Joined: Nov 29, 2008
Points: 2434

Re: How Big Should an Auger Be?
Reply #21   Oct 26, 2010 10:13 pm
Yes I saw that a mile away. Overly analytical tight wat with so much detail to evaluate without consideration to practical issues that really matters. In the end, he will buy the cheapest from a big box store after wasting people's time at the dealer.
Shryp


Location: Cleveland, OH
Joined: Jul 26, 2010
Points: 532

Re: How Big Should an Auger Be?
Reply #22   Oct 26, 2010 10:25 pm
Don't worry guys.  He is only keeping the Sno-Tek for a couple years until every snowblower has hydrostatic drive then he is going to sell it for $500 and get a hydro.

Also, now he is over analyzing his purchase and is afraid to unload the box from his SUV or open it.
Replies: 13 - 22 of 46Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42