Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Ariens traction control or Toro chute??
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
snowgo
Location: Wisconsin
Joined: Oct 7, 2009
Points: 27
|
|
Ariens traction control or Toro chute??
Original Message Nov 11, 2009 10:37 am |
|
I'm in the market for a new snow blower and trying to narrow down my choices. I started a post here a month or so ago, with concerns on Simplicity's electric chute controls. As a brief recap, the primary use of this new snow blower will be to clear out a large corner lot, including a 3 car wide, 2 car length driveway. Due to the layout of the property, I have to blow the snow all the way over from one side of the driveway (across the 3 car widths) to the other side ... and over a row of 4 foot tall hedges on that other side.
Being that I feel more comfortable with mechanical parts rather than electric, I'm dropping the Simplicity out of the choices. My choices are coming down to either one of the Ariens platinum deluxe models (24" or 27") or one of the Toros with the easy turning features. In a nutshell, I'm trying to prioritize what's more important to me ... the really slick chute controls of the Toro or the wheel/traction mechanism of the Ariens platinum machines. I really like the idea of not having to worry about cable freeze-ups in the turning mechanism, which is why I would go platinum instead of just regular deluxe on the Ariens.
Any thoughts on this???
Thanks,
Bob
|
borat
Joined: Nov 10, 2007
Points: 2692
|
|
Re: Ariens traction control or Toro chute??
Reply #5 Nov 11, 2009 8:55 pm |
|
It takes a mighty machine to launch a full housing of heavy wet snow thirty to forty feet. Chances are that you might have to move the snow more than once. Particularly the end of driveway deposit. I wouldn't be too enamoured with the gizmos. Machine build quality, engine power/reliability, simplicity of design, easy handling, snow moving efficiency and cost are most important. If you don't do your own maintenance, dealer support is also crucial. Go with the strongest, simplest, best built, least expensive machine you can find. Don't get dazzled by the "tinsel and toy" factor.
|
opecrazy
Joined: Oct 8, 2009
Points: 30
|
|
Re: Ariens traction control or Toro chute??
Reply #6 Nov 12, 2009 9:48 am |
|
Personally I wouldn't go with the traction control on the Ariens. I have read and heard that if you drive over a patch of ice with one wheel, then that wheel will be the only one spinning. The other wheel that is off the ice will be unlocked, thus the machine won't move forward. If you go with an Ariens then go with the deluxe series that doesn't have the traction control. It is much simpler and you can have full time all wheel drive when needed. Your other option is the Toro, but the 828oxe with the easy turn is $1700 MSRP! Even if you got it for $1500 with a promotion it still would be a lot! I don't know your local prices but a Ariens dlx plat 24 is around $1300-1400 around here in CT. If money is not a main concern then I would definitely recommend a Toro. Others will come in and say they are cheap but that is not the case. Quick Chute - Yes it is mostly plastic but therefore it is light. The amount of force needed to move it is therefore much less. This is why it feels so smooth. Also if you look at the bottom connection of the chute and bucket housing you will notice that there is a large "floating" gap. Therefore there is no friction or chances of ice build up to jam the rotation of the chute. Also the design has been around for almost six years. In other words: it works! Extended Housing intake - The housing area is larger so any snow that has not been thrown can get recycled into the impeller by the augers. This is a plus since the machine only throws the amount it can throw, instead of overwhelming itself and throwing a shorter distance. Freewheel steering - I have no personal experience with this feature, but comparing parts diagrams it looks more heavy duty than any other offerings out there. A bonus of this feature is the ability to put the machine in to neutral by squeezing both triggers. This is great when you want to back the machine up yourself, but you don't want to disengage the drive lever. There are a couple local landscape companies that use the power max machines for snow removal in the winter. I think they also use the single stage machines from Toro but that is besides the point.
This message was modified Nov 12, 2009 by opecrazy
|
opecrazy
Joined: Oct 8, 2009
Points: 30
|
|
Re: Ariens traction control or Toro chute??
Reply #8 Nov 13, 2009 5:51 pm |
|
Snowmann, I was not referring to the remote lockout models. I was referring to the Automatic Traction Control machines. I have read and heard that the "automatic" mechanism can get tricked and only supplies power to the slipping wheel, instead of the wheel that has actual grip. In the scenario I illustrate, the wheel that is on the ice will continue to rotate, while the wheel on the ground will not move. Once again because of the ATC mechanism.
This message was modified Nov 13, 2009 by opecrazy
|
snowgo
Location: Wisconsin
Joined: Oct 7, 2009
Points: 27
|
|
Re: Ariens traction control or Toro chute??
Reply #9 Nov 13, 2009 9:20 pm |
|
Snowmann, I was not referring to the remote lockout models. I was referring to the Automatic Traction Control machines. I have read and heard that the "automatic" mechanism can get tricked and only supplies power to the slipping wheel, instead of the wheel that has actual grip.
In the scenario I illustrate, the wheel that is on the ice will continue to rotate, while the wheel on the ground will not move. Once again because of the ATC mechanism. Hmmm. Wouldn't you think it would work the opposite way? ... in that the power would be supplied to the wheel that still has the traction and not the one that's slipping?
This message was modified Nov 13, 2009 by snowgo
|
goofienewfie
Ariens 1130DLE
Joined: Oct 25, 2007
Points: 107
|
|
Re: Ariens traction control or Toro chute??
Reply #10 Nov 14, 2009 5:36 am |
|
The Automatic traction control is awesome! I really love it and it makes turning my machine so much easier. 30" machine like mine is a fairly large rig and I don't think I would ever go that size without it. As for the quick chute over traction control and throwing end of driveway snow far, I am with borat on that. EOD is heavy, don't be surprised if you have to blow it twice, specially later in the season when the snow banks are high. I have all sorts of brand names around me and all in different sizes. When the heavy wet packed snow comes into play, they all struggle to some degree. As for the features, ditto again.. Look at the build quality of the machines in question. But I must say, the traction control is nice. To the poster taking about the traction control slipping on ice, when going straight.. I see that you read this information, can you post a link? I have never had that happen to me and I get A LOT of ice in my drive. I find it a bit hard to believe, but not impossible.
Cheers Goofie Newfie
|
snowgo
Location: Wisconsin
Joined: Oct 7, 2009
Points: 27
|
|
Re: Ariens traction control or Toro chute??
Reply #11 Nov 14, 2009 7:59 am |
|
Blowing the EOD stuff twice wouldn't bother me. I want to find something that can go "through" it ... period. The snow blower I've been using as far back as I can remember is an old 1971 Ariens. (I'm 54). Where I live (NE Wisconsin), the last 2 winters have been unusually harsh. My 1971 snow blower couldn't get through the EOD stuff after many of our storms. It just would come to a complete halt when it hit the EOD stuff. Then I would have to bring out the hand shovel to finish the job. That's a lot of snow to carry around by hand (3 car wide driveway) and I don't want to ever have to do that again. I may have even torn a rotator cuff carrying the heavy wet snow around (... because I can't toss it 3 car widths). So anyway, that's a big reason why I'm looking for a new machine.
This message was modified Nov 14, 2009 by snowgo
|
|
|