Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hello,

I have a driveway 40ft X 25ft + 60ft sidewalk, and get quite a lot of snow.

I wanted to get the 24" deluxe (for space) but found it hard to maneuver with both wheels locked, not bad with one wheel unlocked.

I was thinking of moving up to the 27" deluxe (larger than I need) which has the trigger for wheel locking for an extra $130.

My local dealer suggests I upgrade to the 24 DLE  with the automatic traction control, light, handwarmer for $ 464 more than the 24 deluxe.

For a little more I can get a Toro 828 XLE which has the power steering (also larger than I need).

Craftman has a 24" 249cc B+S power steeriing $ 1,000 - same features as the 24" DLE , but not sure about quality.

The locan dealer also suggest Simplicity 9hp 24" ST 2718 ?? for $ 1200. Lighter than the Ariens (not sure if it has traction control.

Can someone please advise which one is best bang for buck.

Snowman, you are the Ariens pro, is the 24 DLE worth that much more than the 24 deluxe or the 27 deluxe? Will Ariens have a sale

In Sept. or October that the Dealers will pass on to customers? I read that some Ariens had problems with the Friction Disk and Baffle plates

has to be installed, and chute control cable freezing. Have these issues been fixed in the 2009 units?

Thanks you all.

gsnow

gsnow wrote:
Ariens made in China? Nope.... All Ariens Snothros are made in Brillion, WI., USA (including the Sno-Teks). If she was referring to some of the engines, then this could be the case. The only snow engines available that are not made in China are the Briggs 305cc and 342cc (USA) and the Subaru SX21 and SX30 (Japan). Honda GX might be Japan as well, not sure.

The Subaru SX Snow Power OHC's are a more of a higher-end engine option than both the Honda and Briggs. They are available only from Ariens on models 920010 (ST24E Compact), 921019 (ST24E Deluxe), and 921020 (ST30LE Deluxe).

Thanks for everyones input.

gsnow-I contacted the dealer in Mississauga you mentioned,sound like very good people and better prices than HD.They deal Toro but recommended the Ariens over them due to the fact they do not use plastic like the Toros.Well that narrows it down for me,it will be a Ariens,just gotta decide which model.I pretty much have the same area as you have to clear.Thanks for your recommendation to the dealer.Good luck in your search for a machine.

Snowman thanks a lot for your input, if I get the Ariens I'll stay with the Briggs.

Duster I called W.E today as well and his prices have gone up $30 -$50 from last month and he will not budge. I was still researching in August. He claims he sold 400 units last year.

I called a few more places and found a place nearer me, it's Joy Equipment in Woodbridge, this place is now cheaper than W.E. 's new price.

He does not have any stock yet.

Good luck.

GS

I went through the same debate as you are a few weeks ago.  I had to decide between the Ariens Deluxe Platinum 24 or the Toro 826.  I liked the toro.  It felt lighter than the Ariens even though the weights are about the same (222 vs 224).  I was told that the toro only works with both wheels locked.  This makes it tough and tiring to turn.  On top of that, I have a small section of my rear patio that's only 30" wide.  The 826, at 28" wide would have been tough to get through.  So, I opted for the deluxe platinum 24.  Paid $1560.  Toro was $1499.  So, for $60 more, I got the handwarmers and most importantly, automatic traction control.  Along with the remote chute control, I think I got a good deal.  We'll see as the machine will get here in late September/early October.

Joed thanks for sharing your decision. Yes the Toros are lighter (easier to maneuvre) even without remote wheel lock.

The 24DLE is a better value than the 826LE if it holds up well in quality and reliability. If Ariens has fixed all the issues and no new ones crops up

as Snowman states then it would be a great unit.

 Having said that Toro owners are mostly happy and reported little problems.

So you got the unit from w.E. in Aug. his Sept price is higher.

Good luck.

Gsnow

gsnow wrote:

I wouldn't consider myself knowledgeable if it wasn't for forums like this.  I have learned a lot about these machines since I purchased one.  This is my first snow blower and it was bought based on research and recommendations from the internet.  I made sure to look at all possible machines and really sized up everything best I could.  But like everything, there are things you will later see that you  wish were different, but it is what it is.  Many of the things I did to my thrower would not need to be done by you for possibly three years.  My local Arien's OPE store, offered 3 year summarized service.  This is where they change the oil, grease up the necessary sections, etc..  The thing with my dealer is that you have to pay for it to be picked up and brought back and I do not have a pickup.  I could ask friends with trucks, but I would have to get them to wait or possibly go back to get it.  So I opted to learn what summarized was and do it myself.  This way I get to know the machine and when the three years is up I won't have to pay somebody to do that for me.  Along the way I noticed that things were rusting and seizing up quite fast in places that I didn't want to see it. So I decided to go an extra mile and take care of things that may need to be repaired in the future.  I don’t think the summarized service would go as far I did though and  I do wonder how it would have faired if I didn’t do something’s myself.

But in all honesty, with the three year warranty and hopefully same in summarized service I think these Arien's snow throwers will serve you well.  As for beyond that time, it comes down to maintenance.  I am a person that hopes to see my machine go 20+ years like I have seen many times in these forums. so I have done a few things that may help make things easier to maintain so that I can reach that goal.

I have not looked much at other throwers or blowers since.  But a quick glance at a few of this year products  and I am surprised to see that it appears as if prices have increased in my area.  When I purchased mine it came with hand warmers and differential and it was called the deluxe.  Now the equivalent seems to be the platinum?  I purchased mine 1130DLE for $2100 tax in with delivery and summarized service.  I believe the OPE was almost a few hundred more then from home depot at the time, but due to stock issues, service questions,  parts availability, unsure delivery time, sale price closing and no summarized service I went with my local OPE.   Now the Platinum is 2159 + tax at home depot,  with the taxes in my area that ends up being $340 more. 

I am not sure if it’s in this post or not, but I also seen borat posting about look into older stock for 2008 simplicity models.  So that means changes at simplicity too.   I was interested into the Toro as well and they have a good name, but the local ope dealer did not in my case. Plus for the money I got more on the Arien's, which were listed into my Pro's before.

I think it comes down to researching each machine and the companies that sell/support them.  With the right care either of these brand names have good lasting reputation in the past, Preference may always lead towards brands people own themselves.  Download product manuals see what things are required of each and how do you go about doing it.  Look at the features, warranty, price and service in your area.  Look at parts such as the gear case and augers/impellers for robustness.  Look at how to chute and deflector move and control think about how water would penetrate it.  Most machines with cables have freezing problems..   A excerpt from the Toro manual

"Preventing Freeze-up

• In snowy and cold conditions, some controls and
moving parts may freeze. Do not use excessive
force when trying to operate frozen controls. If
you have difficulty operating any control or part,
start the engine and let it run for a few minutes.

• After using the snowthrower, let the engine run for a
few minutes to prevent moving parts from freezing."


Excited to here new parts may be available to stop this on the Arien's.   Any how, after doing some looking I am sure you will come up with the best solution, I think you are already on the right path with choosing forums for help..   I found the parts manuals to be great reference when looking into the build quality inside the machine..   Arien’s has a great parts radar tool.  I have found similar tools for Toro and simplicity on the web as well.

I think once you pick a machine you might just get sucked into this ope world, maybe pick up a wrench or two ;) Nice machines like the Arien's has the ability to do that to some.. hahaha

The differential is really nice, I wouldn't worry about the size of the bucket, smaller bucket with same engine is nice. Yes you may have to make a few extra passes, but you will have enjoyed the passes more.  The bigger the bucket and they can get awkward/heavy even with differential.   I think a 24 inch platinum machine would be really nice machine, but if you end of driveway gets plowed in crazy, then you may want more..  Depends on your snow falls amount.   I would love to try my 11hp on a 24" bucket with differential; I think that would be deadly machine to operate. 

Good luck with it all.
Cheers GoofieNewfie

I purchased the 924DLE last year. It is a horrible machine with chute controls that barely function. Very loud, hard to start and leaves that nice quarter inch of snow on the drive that ices up later. Would never consider it again. I get sick to my stomach thinking about it because I know with winter coming I will have to deal with it all over again. Buy the Toro.

ntadjs7 wrote:

Hello ntadjs7,

Where are you located? Is it not under warranty still ?  You should get the control fixed, as snowman stated they have fixed the problem this year.

Was the Toro your other choice?

Anyone else have same problem plus loud, hard to start, leaves 1/4 inch snow on the ground?

ntadjs7 wrote:
Yeah, I definitely choose Toro. It's worth.
-------------------------------------------
echo backpack blower

SnowRemover wrote:
Just joined to add my two cents worth... Great forum.

Toro 828OXE DOES have shear-pins, one on each side. You can see on the picture here as well; http://www.toro.com/home/images/t_co_sn_impellerHous_lg.jpg

I've been narrowing my choices down to  in between 24" DLE and 828 OXE as well after considering Craftsman, Snapper, JD and few others including Honda. In my particualr case I need to be able to throw snow about 40ft ahead of me to clear the house on my left unless I'd throw the snow on the adjacent neighbor's driveway . I am hoping that I won't be disappinted with the choice. It appeared to me that Toro 828 will just do that if not barely. Also, I looked for an easy to operate without the need to muscle it around. I found the Toro to be very well balanced fron to back at least without snow being jammed in the auger. It easy to lift the front up as needed. disengaging the either wheel or both to make the turns to make adjustments to the path while on the snow and move it around makes the Toro favorable and more sensible due to the simplicity of the mechanism they used to accomplish it instead of "traction controls" etc complexity. My wife was easily moving it aroun dwhen we tried it as compared Toro and Arens side by side. It's a plus because she has now no excuse not to use it. I definetly liked the shute controls of the Toro over anything else I've seen so far. I't quick, simple and doesn't seem to have anything to go wrong with it easily. I have to add though I am a first time buyer of a snow blower. I also liked the metal side supports on the Toro making the auger enclosure pretty rigid compared to Ariens. Chute being "plastic" doesn't make it inferior to Ariens in my opinion. Depending on what kind of polymer they used to make the part, it may be an issue in extreme cold environments but at least not where I am (NJ). Running into it with your SUV doesn't count as a failure criteria; just don't run into it reagrdless it is steel or polymer. I am definetly sold on the "diverter" of the impelled snow in case the chute is jam packed. Remains to be seen if it works but I like the concept. Hand warmers? I don't see the point of having one for consumer use purposes but pros may think different of course. Besides, if you must have warmers, you can get a kit for $50 (motorcycle grips) and power it from the light ( I presume it is 12V already). At the end, my choice is Toro 828 OXE. I don't see the need for 1028 or 1128 with slightly more powerfull engines. The price difference in my local is $100 and $300 more compared to 828, respcetively.

Let me also share my shoping experience... Last Spring I bought a Honda walk-behind mower from Northern Tools and Eq. in cedar Groove , NJ. (I am including the name for completeness - I believe in consumer's power with their choice of taking their business wherever they want) I made few visits there to get the mower and paid a little more than otherwise I could somewhere else for the time they spent with me and the convenience of the location to my local. Naturally, they were my first stop for the blower too. First time around, they didn't have any and they told me they'd call when the shipment arrives (they had my number). They didn't call so I stopped by again on the way back from work last week. They had a few on display although not sure if mor ethan what they had earlier. I was given the details, some info not accurate but still volueentered no issues. They had an LXE with a price tag of $1799 - ON SALE! Since I knew that's the one I was going to get, I asked for the OXE with the B&G motor and the price for it mentioning $1799 seemed too steep for the last year's model. He flipped and accused me of wasting his time. He could instead attend other waiting customers, etc. there were none by the way.  I reminded him that I WAS a customer too. If they woudl negotiate they would not be in the business fro me to walk in to talk to someone to learn what I learned. I gave him credit for being patient with me and thanked him for his time but I didn't appreciate him accusing me of wasting his time. I apoligized for wasting his time and as I walked away said that he'll never see me ever again. I went out and bought the 828 OXE ($1590) the following Saturday, delivered to my home. Not only that, they spent more time with me and my wife as much as we needed. Also, was able to check out and try other equipment that we'll buy eventually. no pressure...

Now, I am hoping that we'll get yards and yards of snow this year.
Ruhi