Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Home made impeller kit

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Home made impeller kit
Original Message   Dec 3, 2008 10:21 pm
Since I had the auger assembly apart to replace bearings & bushings, I thought I would try my hand at fabbing an impeller kit. Already had all the materials laying around. I still have to put everything back together, but I can hardly wait till I can try it out. I used some 1/4 rubber sheet I had and hope it will last a while.

Don't know if will make any difference, but I thought it might be a good idea to bevel the leading edge to help shed the snow.





https://t.me/pump_upp
Replies: 21 - 23 of 23Next page of topicsPreviousAllView as Outline
opecrazy


Joined: Oct 8, 2009
Points: 30

Re: Home made impeller kit
Reply #21   Nov 19, 2009 10:20 pm
Borat that story was awesome!
GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Re: Home made impeller kit
Reply #22   Nov 20, 2009 7:14 pm
"The next morning, I was giddy with the prospect of taking a bit of stroll past his place. I waited until later in the day (gave lots of time for the kid's father to clear the driveway) then went for a walk. As I approached, I could see the tell tale signs of coloured paper spread over a fairly broad area. As I got closer, I noticed that the driveway was only half cleared and the snow thrower silently sitting in the driveway. I took a good look at it from the street and could see that it had a bundle of flyers jambed in the auger and impeller."

Borat, you're my hero, that's what I call divine retribution. Did you ever consider writing short stories?

https://t.me/pump_upp
borat


Joined: Nov 10, 2007
Points: 2692

Re: Home made impeller kit
Reply #23   Nov 20, 2009 9:40 pm
GtWtNorth wrote:
"The next morning, I was giddy with the prospect of taking a bit of stroll past his place. I waited until later in the day (gave lots of time for the kid's father to clear the driveway) then went for a walk. As I approached, I could see the tell tale signs of coloured paper spread over a fairly broad area. As I got closer, I noticed that the driveway was only half cleared and the snow thrower silently sitting in the driveway. I took a good look at it from the street and could see that it had a bundle of flyers jambed in the auger and impeller."

Borat, you're my hero, that's what I call divine retribution. Did you ever consider writing short stories?


Yeah. I tried it once. By the time they finished censoring the book, all that was left was the page numbers.
Replies: 21 - 23 of 23Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.