Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264
Home made impeller kit Original Message Dec 3, 2008 10:21 pm
Since I had the auger assembly apart to replace bearings & bushings, I thought I would try my hand at fabbing an impeller kit. Already had all the materials laying around. I still have to put everything back together, but I can hardly wait till I can try it out. I used some 1/4 rubber sheet I had and hope it will last a while.
Don't know if will make any difference, but I thought it might be a good idea to bevel the leading edge to help shed the snow.
