Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I'm looking into a snow blower/thrower.  I live in upstate NY (near Albany) and would estimate we get about four to five storms a year with about 8".  There are the rare NorthEasters that may drop 15" every three or four years.

My driveway is on about a 3 degree grade, one car length in width for about thirty feet, then it opens up to about three car lengths wide (in an L shape) for about twenty feet.

Is a single stage thrower too small, or will it work but just take more time to clear the snow?

I see CR reviewed models recently and liked the single stage Toro CCR-2450 which I can get online (free shipping, no tax) for $537 at SpeedWaysales.com.

The two-stage model they liked was a Craftsman 88790, which Sears has on sale for $949.

I would love to hear what people think about the two-stage versus one-stage, especially if you live in the Northeast near Albany, and what models you think are the best.

Lastly, I HATE maintenance, and the Ariens web site scared the bejeesus out of me with their maintenance section (You must tighten the drive belt after 20 hours of usage.  Then in the drive belt section it says, "Be careful, if this is not done right you may be injured or killed").  

I think I'm starting to have deja vu all over again.....

Didn't we do this whole dance at the old place not too long ago??

Emmo wrote:

Yes......We did.......

C

Original poster...

I understand you asking WHY? WHY? WHY?....  wanting details to back up information/opinions  given...
I'm very detailed orientated... and like knowing the finite facts...
I can get them... if I put in the effort to uncover as many as I choose... just as you are starting...

Folks here are not trying to sell you a particular brand/makemodel of  snowblower...
...no hidden agenda...

People who responded... put in quite a bit of the time and effort on this one post...
All for free !
...although our commission on Ariens is more than Craftsman brand  $$$     LOL...


If you want details... details... details... backing up the opinions given here...
I dunno' how you will proceed to do this... some suggestions have been given...
It may be time to go and check out 1st hand...

Most don't provide all the details of  WHY? even though you wanna' know...
I'm 1st in line...

It's just too time consuming to answer the WHY? in detail hundreds of times from different posters...


At some point we were asked to choose between 2 machines... We all know which one won the vote-of-long-term-value... and best-potential-fit for you...
...even if we don't understand all the details behind it...


Choosing a shovel will be easier...

Dave...

Hi SnowRemover,

I was going to suggest that you call some local small engine repair places that don't sell machines to get their opinions based on their repair experiences, but now I second Richie's post. Going back to your original post you indicated that you didn't want to do be concerned with doing maintenance. Having the Sears in house protection plan will take care of that for you. You will also have time to look at other brands, compare workmanship, weld quality, metal thickness, etc. while you are using the Craftsman. You will have a well maintained machine that can be easily sold via Want-Ad Digest or the TU if you decide to go with another brand or get another Sears. Now let's get some snow.

Dave_in_ct

In choosing a shovel would you recommend a snow shovel,sand shovel, square nose, or spade?
Long handle or short??
Fibre-glass or wood??
Straight handle or d-shaped
Ergonomic or regular??
Straight or curved blade??
Plastic or metal??
SSSSSSSOOOOOOOOO many choices !!!!! Not much time will snow someday????

(ALL IN FUN!!!!!!!!)   HAVE A GREAT DAY!!!!!!

T.J. terry

Dave_in_CT,

Thanks for the information.  It seems everyone was a lot nicer after my tirade.  You did say "People who responded... put in quite a bit of the time and effort on this one post...
All for free !"

I spend countless hours on experts-exchange.com helping people for free with their programming problems, so I know what its like.  I also spend a lot of time on the car/truck bulletin boards, and I will never berate a brand or specific vehicle model without evidence of the problem (backed up with a link to the story/article).

Now I know that there is a ton more information on cars than snow blowers - or my Google searches would have provided much better results.  The only reliability stats I can find on lawn equipment is in CR's buying guide.  Craftsman is highly regarded in everything (and so is Kenmore), but there isn't any information on snow thrower reliability.

From what I can tell, I get all the features I want in the Craftsman, I get the Service contract and if its anything like there lawn mowers/garden tractors it will be very reliable (though the Honda's are even more reliable, just cost twice as much).

I do appreciate what effort people have been put in, but don't enjoy (as a newbie) being called "Snowdude".

Lastly, and this is partially off topic, on another thread in abbysguide a person asked about computers.  I provided a link backing up my assertions, the Administrator (Peter) who was arguing the other point, removed the whole topic.  And the guy throwing names around on this topic is a Full-Moderator accusing me of an agenda (Marshall).

So I can't apologize for going off on a tirade when supposed Moderators and Administrators are berating me and deleting posts/topics (this after I complained no one backs up their statements - then I do it and get the whole topic removed!).

I'm done ranting.

Hey, this site is currently in beta mode. For a while, the Lawnmower forum was the end-all place to post things, but as we are going live tomorrow, we are removing irrelevant topics and moving others to their proper homes, now that all of the sections are up and running. Since there is no computer board, the entire topic was removed. As I explained in a private message to you, once the computer section is up, you can discuss things there to your heart's content.

SnowRemover wrote:

One of my neighbors  bought a Crafstman with the plastic chute last year and it broke during  the first storm.

Another neighbor bought a Crafstman a few years ago with the in home protection plan and had a lot of trouble with it.  The 48 to 72 hour turn around time turned out to be a week and it didn't help much since the machine broke twice during storms.   He got so upset he went back to Sears and tried to get them to take it back.  They ended up giving him a 10% refund.

By the way I have to say I like your pragmatic approach to deciding which machine, if any, is right for you.  My advice would be to get someone else to clear your driveway.  You seem to have a fear of machines and if your not the type of person who can do minor repairs and make simple adjustments your probably getting in over your head with a snowthrower.  They work in a harsh environment which means they'll break. And they'll most probably break at the worst possible time.

Edited: Removed my personal opinion on Crafstman vs Ariens.

Snowremover, You like to call em as you see em, I decided to take you up on it. Why don't you like it? It's how you came across!

You never did say you were going to go to Sears, Ariens, Simplicity, Honda, Toro, etc. and look at the differences in person. Not everything can be done on a computer screen.

You don't like to maintain and service them yourself? 3 year service contract? What are you doing the 4th year and beyond. Gonna trade it in and buy another, service it yourself, pay someone to service and fix the 4 year old MTD or renew the agreement at the then current price on the old MTD?

I just got off the phone with Sears and learned that the service agreement is for 3 years on all lawn and garden equipment, snowblowers included. You know that it doesn't cover oil and filter changes, spark plugs or blades if it's a mower, correct? That's the vast majority of your maintenance! Oh, they'll do it but they'll charge you $50 bucks. You know it may take up to two weeks (max) for them to come to your place to fix your snowblower too, right? Maybe it will wait to snow for two weeks after it breaks?

So, for the price of the Craftsman plus the service contract price, give or take, you could have a Premium machine that has a history behind them of longevity and great performance. You still have to do your own maintenance regardless which way you go. The warranty on the Ariens, for example, is three years, the same length of term you're covered for if you pay extra for the service agreement.

So I guess you get either an MTD that someone drives to your house to fix, and pray they actually get to you first or, for the same money, you get a premium machine and have a machine that has better odds of serving you reliably for years to come.

Quote........

"""Lastly, I HATE maintenance, and the Ariens web site scared the bejeesus out of me with their maintenance section (You must tighten the drive belt after 20 hours of usage.  Then in the drive belt section it says, "Be careful, if this is not done right you may be injured or killed")."""

I guess you're assuming this won't be needed on the MTD? If it is needed, I hope it's not needed right before it's getting ready to snow and you're waiting on the Sears man to come.

 And finally, Consumer Reliar magazine doesn't test snowblowers for 7-15 years to come up with an opinion, they don't have the longevity factor figured in at all, if they say they do, it's a mere guess. Frankly, I'm not so sure about there testing for the days they actually do it.

I could care less which you buy but, I suggest you listen to the majority of these dudes on the forum that have been doing this for many, many years. It's their experience they are giving to you, not their ego!