Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Help: Old Ariens 6HP engine works but don't move
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
luvxu
Joined: Jan 15, 2008
Points: 4
|
|
Help: Old Ariens 6HP engine works but don't move
Original Message Jan 15, 2008 9:20 am |
|
Hi all,
I purchased an old (pretty old I would said) Ariens 6HP (Tecum engine). I am not sure how old it is and what is it model number. What I see is that it has a white engine instead of black as in some other Ariens snow thrower. It was working for sometime but now it doesn't move anymore. I opened the bottom plate and saw that the rubber on the friction disc felt out so I guess the friction disc is broken. Would you be able to help me locate the part to buy and how to replace it.
Another bit of information, I measured the diameter of the friction disc, it appears to be about 5 1/2 - 5 3/4 inch.
Thank you for your help.
Luvxu
|
bmwe0692
"Have a great and glorious day"
Location: Iowa
Joined: Dec 4, 2004
Points: 79
|
|
Re: Help: Old Ariens 6HP engine works but don't move
Reply #2 Jan 15, 2008 12:27 pm |
|
Hi there. Start off by looking under the left handle bar,on the bottom plate. The model and serial numbers should be on a sticker. If no sticker, the numbers should be stamped into the metal. Might have to scrape some paint off. Get the numbers and go to www.ariens.com Go into parts radar. Put in model and serial number this should bring up an exploded parts diagram, plus parts numbers. You can get owners and parts manuals from Ariens also. Books cost me about $13.00 about four years ago. Also check on the blower right side as you are standing behind the machine,where the snow shoots out. There should be another sticker, this is for the snow blower unit. The numbers on the bottom cover are for the tractor drive unit. With both of these numbers (tractor and snow blower) you should get the right manuals. Hope this helps you in getting going again!! T.J.
Put it where the Big iron wheel runs!!!
|
uconncuzinvinny
Go UCONN!
Location: Milford , CT
Joined: Nov 6, 2003
Points: 47
|
|
Re: Help: Old Ariens 6HP engine works but don't move
Reply #3 Jan 15, 2008 10:55 pm |
|
Ariens now has Owners, Parts, and Service Manuals in PDF files available FREE for downloading - all you need in the model number and serial number. Download Ariens Manuals Click Here
This message was modified Jan 15, 2008 by uconncuzinvinny
Ariens 824 with R3 Drive Update, Toro 6.5 HP personal pace Lawn mower, B&S Generac 2700 PSI pressure washer.
|
luvxu
Joined: Jan 15, 2008
Points: 4
|
|
Re: Help: Old Ariens 6HP engine works but don't move
Reply #4 Jan 16, 2008 9:15 am |
|
Hi, I have tried to look but I can only find the serial number, not the Model number. The model number is 10ML60. I am posting some photos here see if someone can recognize the model number. 1. http://www.flickr.com/photos/10788368@N07/2197626016/ 2. http://www.flickr.com/photos/10788368@N07/2197628070/ 3. http://www.flickr.com/photos/10788368@N07/2197628066/ 4. http://www.flickr.com/photos/10788368@N07/2196846403/ 5. http://www.flickr.com/photos/10788368@N07/2196847017/ Thank you for all your help. Luvxu
This message was modified Jan 16, 2008 by luvxu
|
elbrecht
Joined: Dec 23, 2007
Points: 14
|
|
Re: Help: Old Ariens 6HP engine works but don't move
Reply #5 Jan 16, 2008 10:55 am |
|
Your pictures didn't take- but copying the link got me to them. No help on a model number, but your vintage looks like late 70s to me. I'll bet this is the disk - Ebay item 290198617556 . You're only out $13 if it isn't. Removal/replacement might be a bear. As simple as these machines were, my disk replacement takes 2-3 hours. There are some later models that don't require taking *everything* apart to slide the disc off a hex shaft. Jim
|
luvxu
Joined: Jan 15, 2008
Points: 4
|
|
Re: Help: Old Ariens 6HP engine works but don't move
Reply #6 Jan 16, 2008 11:25 am |
|
Thanks Jim, I ordered the disc. It is cheap enough that I can order a few for spare part. Hopefully I can get it done this weekend. It is very cold here in New England so I am not looking forward to an easy time :(
|
uconncuzinvinny
Go UCONN!
Location: Milford , CT
Joined: Nov 6, 2003
Points: 47
|
|
Re: Help: Old Ariens 6HP engine works but don't move
Reply #7 Jan 18, 2008 12:00 am |
|
try this link - click hereclick on the view/download link next to the manual on the ariens page
This message was modified Jan 18, 2008 by uconncuzinvinny
Ariens 824 with R3 Drive Update, Toro 6.5 HP personal pace Lawn mower, B&S Generac 2700 PSI pressure washer.
|
|
|