Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
MikeP
Joined: Jan 2, 2006
Points: 1
|
|
Generators
Original Message Jan 2, 2006 1:13 pm |
|
Wilma whipped us pretty good in Ft Lauderdale, and now I'm trying to buy a good quite generator in the 6-8 kw running range. The problem is that Home Depot and Lowes ship in units but you can't research them.
Am looking at a Pramac 6000S which has a 13 hp Honda engine, and is rated at 5700 running, 6000 surge watts. Also looking at Briggs Power Boss 6200 with a 13 hp Vanguard rated at 6200 and 9000 watts model 30201....and a Briggs EXL 8000 with a 15 horsepower Generac Extended Life Commercial engine rated at 8000 running and 13500 surge (model 30244) with metal fuel tank.
The problem is that you can't find any info on these models on line!!!!! And when you call the mfg, they can't either.
CAN ANYBOBY OFFER ANY SUGGESTIONS.
|
jhart
Joined: Dec 14, 2005
Points: 7
|
|
Re: Generators
Reply #12 Jan 8, 2006 8:38 pm |
|
I use a Yamaha YG2800I 2800 Watt Industrial Generator which comes with an invertor and puts out a pure sine wave... it is quiet and easy on gas... we don't have many power outages here, but it will run the fridge and freezer in the summer and the furnace in the wiinter. Also powers just about any 120v tool including a table saw, scroll saw, any drills, etc. My garage has only one 20 amp circuit and the generator gives us another.
I also use it to power lights on remote for my video production company. Since it puts out a pure sine wave, I can use it with delicate lighting instruments like Kino Flo Divas, which have sensitive ballasts, and Mole Richardson fresnels. I also run a PC communications setup on remote with it... and lithium Ion chrargers. I love it.
|
wally
Location: Oakville, ON Canada
Joined: Nov 20, 2005
Points: 30
|
|
Re: Generators
Reply #14 Jan 9, 2006 10:44 am |
|
jhart.... I checked out your YG2800I on the Yamaha site...certainly an impressive package at that power...great power/weight ratio...and the inverter aspect for clean power is obviously a plus (something none of my powerplants had). While I was there, I found the EF3000iSEB ...new this year, I gather.... and I rather like that one....particularly since it has the electric start, low noise levels, and DC as well as AC. The power boost could have advantages as well. Since a more modern stand-by AC source was on my agenda for this spring, I'll be certain to check these out. *(:>)*
|
whitedog
cry once when you buy it, not every time you use it!
Location: the holy state of new jersey
Joined:
Points: 354
|
|
Re: Generators
Reply #15 Jan 9, 2006 7:51 pm |
|
i have used my computer with my mitsu generator supplying my electricity and it did not seem to affect my computer in any way. so i guess this makes it "clean power" i know my new winco is clean power. the mitsu is not so load that it bothers me in the house nor have any neighbors complained about the noise. i have run this mitsu on gasoline as well as natural gas. it will burn propane but i have not used same. i am looking to sell the mitsu as soon as i get the winco all hooked up and would be willing to ship the generator,
ope: ariens 8524, winco 8kw - b/s vanguard v twin, little giant 5 hp b/s, stihl br-650the difference between smart and stupid is stupid knows no bounds
|
gary31570
Life is a journey, enjoy the ride.
Joined: Nov 6, 2005
Points: 27
|
|
Re: Generators
Reply #16 Jan 9, 2006 8:29 pm |
|
Wally or jhart, Will you provide us with a few paragraphs of "inverter technology" means? Is this the future of portable generators. Seems the Yamaha YG2800I 2800 Watt Industrial Generator is something many homeownes will find useful at home and on the road. This is a very helpful thread on the understanding the issues of buying a portable generator. Gary
Cleveland,, OH
|
jhart
Joined: Dec 14, 2005
Points: 7
|
|
Re: Generators
Reply #18 Jan 9, 2006 11:00 pm |
|
Yamaha states the power out of their invertor series generators is equal or better than what your local power company supplies. - Inverter System with Pulse Width Modulation - Industry-leading system that produces higher-quality and cleaner electricity. Results in pure sine wave as clean or cleaner than commercial power and can operate products with built in microcomputers.
- “Economy Control” electrical governor - Engine speed matches electrical needs which improves fuel economy and reduces noise.
- Sixteen-pole Alternator, Twenty-four Coil Stator - Eliminates conventional two pole rotating field & massive stator for reduced weight, compact design and an exceptional power output to weight ratio.
- Cast iron cylinder lining - Provides optimal heat dissapation, consistent performance during continuous use and long engine life.
- Oil Watch Warning System - Automatically shuts off before oil level is low and cannot be re-started until oil is added. Prevents engine damage and costly repairs while enhancing long-term durability.
- Specially designed muffler - Offers a compact design, reduced weight and noise.
- USFS-approved Spark Arrestor - Offers quiet operation and keeps sparks from exiting exhaust system, reducing chance of fires caused by an errant spark.
- AC Non-fuse Thermal Breaker - Protects AC circuit in case of an overload for added durability and peace of mind.
- DC output - Provides both AC and DC output and enables battery charging.
- Tool Kit - Makes service easy.
They're very well designed imho.
|
gary31570
Life is a journey, enjoy the ride.
Joined: Nov 6, 2005
Points: 27
|
|
Re: Generators
Reply #19 Jan 10, 2006 9:09 am |
|
Nibbler and jhart. Thanks for the informative description of inverted power. We are seriously considering buying Yamaha YG2800I 2800 Watt Industrial Generator. Amazon Tools says they have the best price, or will beat any other price by 10%, is $1,300 plus $49 for shipping. Amazon Tools has been a reliable, fair, source for me. Seems to me with a weight of 66 pounds without gas, the generator would be handly to haul in the back of my truck as well as to have it as a backup at home. We have not had any significant power outages in Cleveland during the past two years, except that big one that put the east coast and midwest in the dark for a few days. Gary
Cleveland,, OH
|
Snowbound
Joined: Feb 17, 2006
Points: 76
|
|
Re: Generators
Reply #20 Jan 17, 2007 1:13 am |
|
Costco has a $#%*mins Onan Homesite 6500 Portable Generator available at $679 which includes shipping and wheels but no battery. (5000 watts, 5500 peak) I also found this model available elsewhere for slightly fewer dollars, however shipping is not included. While cruising the web, I found a Gentron (6500 watt peak, 6000 continous) generator "Pro Series". The engine is a Lifon (Chinese). The ad stated it had a JD engine, however all models in 2007 will be shipped with a Lifon. This machine is available (or was) for $699, an attractive price which includes shipping. The ad did state: "This is a pre-order special for shipment arriving Dec. 30, 2006", so it may not be available at that price. It did at least give me a benchmark in pricing. Does anyone here have any knowledge of this company and its generators? http://www.generatordepot.us/index.asp?PageAction=VIEWPROD&ProdID=30 Does anyone here provide a weather shelter for protection, or some sort of a doghouse when operating their machines? I also found that some machines don't have an "automatic voltage regulator". The $#%*mins-Onan and Gentron have them although Onan didn't list it in their specs. I called Onan about this, and the woman didn't know the answer. She asked someone offline, and then stated it had one. Makes me nervous when I get this kind of response. I bought the $#%*mins Onan and expect it to arrive in about four weeks. Here's a small garden shed modified to be used as a generator shelter. Check this out. Looks like a good idea. http://www.nooutage.com/powershelterkitii.htm
RE: Chinese Portable Generators |
This message was modified Jan 17, 2007 by Snowbound
|
jhart
Joined: Dec 14, 2005
Points: 7
|
|
Re: Generators
Reply #21 Feb 6, 2007 7:20 pm |
|
"Does anyone here provide a weather shelter for protection, or some sort of a doghouse when operating their machines?"
If I'm home, I run the generator from my garage, which is not physically connected to my house. I also keep a small fan running to exhaust fumes. This brings up a good point to make.
Electrical extension cords, or stingers as they're called in production work, quickly build up resistance to the current flow, so it is important to use a large gauge from the generator to the house, or worksite. I use a 50ft. 10 gauge, and split into three 12 gauge runs to the appliances.
If I'm on remote, I transport the generator in the lined bed of an old '93 stick toyota pickup truck, grounded to the chassi. After it is up and running I've built some sound baffles to stand up in the bed, and a baffled cover that I slide over the top. It is protected and quiet.
good Luck!
|
|
|