Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Found a 2000, with a chipper and tiller. $1500. Any thoughts, info?

Hi Rob...

Price is very good... tractor w/ tiller new is about $2,000 - 2,300...  (the 720 is not a current model) ... PTO chipper new is $1,250 just by itself... so... your lookin' at less than 1/2 price new...  ~$3.300++ vs. $1,500 before bargining... and no sales tax...

The chipper/shredder puts the equivalent Troy-bilt to shame... as does the rototiller... no contest !   Owned one top-of-the line Troy Bilt chipper/shredders... and three Troy Bilt rototillers... one was new top-of-the-line... again... no contest... BCS hands-down ! Many other attachments for the BCS are available...

Overall build is for professional use... not homeowner quality... all gear drivetrain is (was) warrentied for life... you can read my BCS review in the Reviews section here... I have a (used) older... BCS 725 with an 8HP motor... tiller... chipper/shredder... snowblower... grader blade... wheel weights... differential locks... quick disconnect PTO... tire chains... no instant reverse... does this one have instant reverse ? Should be an excellent feature... shifting the BCS is not smooth...

If you have uses for it... I would not hesitate on a purchase... in good condition of course...

Dave...

	Make: BCS Model: 720 Rear Tine Tiller Year: 2000
8HP Briggs & Stratton, gear drive tiller with 20" tiller box & Chipper/Shredder attachment

Looks like new Rob !

Think I see the "instant reverse" control... nice feature (although never tried it )..  

If you have a need... use... want... grab it quick !... It's a life-time-use machine...

Dave....

Thanks Dave I'll look at it tomorrow on the way home and let you know. Thanks. It's at a local dealer. He says 1599. But I hope to do a little better.

1599 Thats a little expensive isn't

Unless it's a rental unit with a zillion hours and the resulting customer neglect rental units tend to get, I'd say it was a very good deal.

It looked OK. It is a complicated out of state consignment. I don't really need the tiller. So i might offer what the chipper alone is worth. Can't hurt to try. I don't have the OK from the power that is yet either. So I'll let you know how it goes.

Robmints...

If you only want a chipper/shredder... consider other brands too... BCS makes a self-engine-powered one... (~~same as w/ this machine)...

But... transporting the chipper with the tractor is a LOT easier than pulling by hand...

What do you want to do with the machine ? Cheiiper/shredder? How far to move it? Terrain? ...you get it... tell us more...

Dave...

I want to chip stuff that is too small to burn. I have kind of a woods trail or two that I would like to keep open. The brush blade on the trimmer works well, but I miss my Gravely. The snowblower I have is OK, but not great. Those little slush paddles Clarence makes for the impeller are OK, but not great. Here in Maryland we get a lot of slushy wet snows. I feel a single stage would work better than a two stage. The Snow Commander Is not powered, and I have a driveway on a hill. I will do next to no tilling. So I would like a 20 or 26 inch brush mower, chipper, and 24 or 28 inch snow blower.

I have several acres that I would like to act like I am attempting to maintain it. Hills, woods, lawn, trees, fence, the regular stuff.

I miss my Gravely. I sold it because it was not an L8, and went too fast for many things that I did with it. The gear reduction wheels were an option, but I decided not to.

Dave, I have read your opinion here and on other sites. I take your word  for it. Your opinion is the only reason I am considering a BCS. I need to get Sweety smoked up and pop the question though. Since she doesn't smoke or drink there seems to be a small challenge I need to over come.

If it had any combination of two: snow blower, chipper, brush mower, there would be no question.

Hi Robmints...

A 1-stage snowblower attachment and brushcutter attachment are available for the BCS tractor... I have the 1-stage blower... it's an excellent snowremover... better than any 2-stage (up to 8hp) I've used.. but the BCS dosen't handle agillaly like a dedicated snowblower... my biggest issue is shifting into reverse... looks like the one you're lookin' at has an instant reverse control...  and... gotta' muscle it to turn sharp... ugggghhhh... great for straighter runs... the bigger BCS's have "power" (brake?) steering... EZ... I understand...

I've tried the brush cutter on a used BCS I looked at last year... works very well...

The rotiller can be used for more than just garden tilling... good for loosing soil where you want a trench... also scarifying the lawn for re-seeding...

And having the tractor move the chipper is a live saver... although it's smallish wheels aren't great on uneven ground... sometimes easier to move it in reverse... but it's so great having the tractor push/pull it instead of me !  Hand moving the Troy Bilt chipper/shredder up inclines was a LOTTA' work ! ...they may (do) have a tow hitch available for some Troy models to be pulled by a lawn/garden tractor...

The attachments for the BCS are also well bilt... and cost less than a consumer-grade dedicated machine... check 'em out...

Dave...