Abby's Guide to Vacuum Cleaners
Username Password
Home Discussions Reviews More Guides
Abby’s Guide > Vacuum Cleaners > Discussions > Looking for a lightweight

Vacuum Cleaners Discussions

Search For:
jkbmmv


Location: Dickinson, ND
Joined: Oct 11, 2008
Points: 28

Looking for a lightweight
Original Message   Nov 30, 2011 4:08 am
Ignoring my other post about canisters, I am looking for a Christmas gift for Mom.. She is getting older now and is having trouble in the strength department... She still lugs her Kirby g3 around the house, but is wanting something for the downstairs bedrooms... After listening to her describe what she hates about all of the vacuums I have brought to her here is what I need to find:

A bypass upright with the motor in the head and not the neck, no on board attachments and has the ability to go under beds..

Does such an animal exist? I'd give her my oreck that I have but the brush roll is so soft compared to the others that it really won't separate the nap and clean the floors...

Thanks in advanced!

Joshua
Replies: 4 - 13 of 17Next page of topicsPreviousNextNext page of topicsAllView as Outline
Venson


Joined: Jul 23, 2007
Points: 1900

Re: Looking for a lightweight
Reply #4   Nov 30, 2011 6:23 pm
jkbmmv wrote:
Are the riccar/simplicity lightweights (freedom and what have you) worth their beans in anything?

.

The Riccar Supralites and Simplicity Freedom get great ratings and user reviews. The only disadvantage, for what they are, is the noise level.  How bothersome that is depends upon the individual user.  Other than that, Riccar/Simplicity machines are sold by independent vac stores meaning price may be negotiable allowing them to be competitive as the MSRP is a little up there for a lightweight meant only to handle flooring. 

Note the Hoover Platinum bagged vac weighs in at about thirteen pounds and the Riccar and Simplicity at about nine.

Venson

vacmanuk


Location: Scotland UK
Joined: May 31, 2009
Points: 1162

Re: Looking for a lightweight
Reply #5   Dec 1, 2011 7:13 pm
Dont forget Venson though, SEBO may be expensive but the alternative is the SEBO based Windsor Sensor uprights, usually cheaper as they are based on the older X1 Auto (the one we had for 15 years.) Comes with tools and a wand, but you don't have to use it.
Venson


Joined: Jul 23, 2007
Points: 1900

Re: Looking for a lightweight
Reply #6   Dec 1, 2011 10:46 pm
vacmanuk wrote:
Dont forget Venson though, SEBO may be expensive but the alternative is the SEBO based Windsor Sensor uprights, usually cheaper as they are based on the older X1 Auto (the one we had for 15 years.) Comes with tools and a wand, but you don't have to use it.


Point well taken vacmanuk, but I think cost is an essential issue in buying especially with with the problems we're having here. 

When I had the money -- and steady work -- I bought my Mieles despite, even then, their meaning a disproportunate stretch of the budget.  However, if I had to replace a vacuum now there's no way per budget I could swing a like purchase without seriously messing up money needed for other basic but very necessary things.  The person asking has stated he's pulling three jobs.  I couldn't in good conscience recommend other than what appears conveniently affordable.   That's why I didn't even bother to mention Miele when he spoke of the "command control" he'd like to have on a canister vac.  Miele is best in show but can definitely be lived without if you have to.

Being perfectly honest, I see a decent vacuum as an essential for any household. Yet, in mine, if a replacement machine is called for I'll be buying a good refurb or used item. 

Best,

Venson

jkbmmv


Location: Dickinson, ND
Joined: Oct 11, 2008
Points: 28

Re: Looking for a lightweight
Reply #7   Dec 2, 2011 10:35 pm
Don't let the 3 jobs fool you. I don't have the patience to do anything for too long of a time. They are all part time jobs throughout the week to just give a bit of variety. If I had just one full time job I'd go nuts doing the same thing over and over.

Now, as far as what I was looking for with this, I had 3 Windsor XP12 machines and she didn't like them because there was too much weight on the handle when she used them. Same with my Simplicity 6 series. She had a few wal-mart specials that she bought and didn't like them because they had everything on the neck/bodies and they were heavy. When I brought the supralite she actually seemed intrigued.. I think our only complaint about the machine _is_ the noise... Why would they make the machines so noisy? I mean since they are direct air machines the exhaust goes through the bag so why can't the motors be a bit more muffled? If I remember correctly, I had a post a few years ago about this very issue with commercial orecks... I wonder if a bit of dynamat on the underside of the housing would help? I guess its just a concern with her house because the noise actually echos... Oh well, I have until the middle of January to return the machine if its not tolerable.

As far as the Miele machines, I thought the s7 was the *only* actually made-in-house machine? Not that I wouldn't mind having an s7 upright if I had more carpets, but still? I did actually look at Miele first before I went with the Riccar... The prices really weren't much different, but I am wondering if this is gonna be like the whole Dyson thing, a European vacuum sold in America.. Now to my other post for the remainder of this post...

Joshua
vacmanuk


Location: Scotland UK
Joined: May 31, 2009
Points: 1162

Re: Looking for a lightweight
Reply #8   Dec 4, 2011 1:00 pm
jkbmmv wrote:
Don't let the 3 jobs fool you. I don't have the patience to do anything for too long of a time. They are all part time jobs throughout the week to just give a bit of variety. If I had just one full time job I'd go nuts doing the same thing over and over.

Now, as far as what I was looking for with this, I had 3 Windsor XP12 machines and she didn't like them because there was too much weight on the handle when she used them. Same with my Simplicity 6 series. She had a few wal-mart specials that she bought and didn't like them because they had everything on the neck/bodies and they were heavy. When I brought the supralite she actually seemed intrigued.. I think our only complaint about the machine _is_ the noise... Why would they make the machines so noisy? I mean since they are direct air machines the exhaust goes through the bag so why can't the motors be a bit more muffled? If I remember correctly, I had a post a few years ago about this very issue with commercial orecks... I wonder if a bit of dynamat on the underside of the housing would help? I guess its just a concern with her house because the noise actually echos... Oh well, I have until the middle of January to return the machine if its not tolerable.

As far as the Miele machines, I thought the s7 was the *only* actually made-in-house machine? Not that I wouldn't mind having an s7 upright if I had more carpets, but still? I did actually look at Miele first before I went with the Riccar... The prices really weren't much different, but I am wondering if this is gonna be like the whole Dyson thing, a European vacuum sold in America.. Now to my other post for the remainder of this post...

Well if your mom doesn't like the XP12, she's going to hate the Miele S7. Too bulky, too big and its quite a chore turning the handle from left to right. Early models in the UK suffered from handles breaking off.
jkbmmv


Location: Dickinson, ND
Joined: Oct 11, 2008
Points: 28

Re: Looking for a lightweight
Reply #9   Dec 7, 2011 2:28 am
Lol, no, I wanted the s7. I thought they were impressive machines when they came out.. But then again, I liked the xp12... :/

Joshua
vacmanuk


Location: Scotland UK
Joined: May 31, 2009
Points: 1162

Re: Looking for a lightweight
Reply #10   Dec 7, 2011 1:27 pm
What about the Sebo Felix or its commercial twin, the Windsor Axxcess?

hooverman


Joined: Jan 10, 2010
Points: 251

Re: Looking for a lightweight
Reply #11   Dec 26, 2011 8:38 pm
Hoover WindTunnel Air

XXX VortecCyclonic (a. k. a. Hoover WindTunnel "killer")

Bissell Easy Vac

Eureka Litespeed (Comes either bagged or bagless)

All have on-board tools

This message was modified Dec 26, 2011 by hooverman
vacmanuk


Location: Scotland UK
Joined: May 31, 2009
Points: 1162

Re: Looking for a lightweight
Reply #12   Dec 27, 2011 5:20 pm
hooverman wrote:
Hoover WindTunnel Air

XXX VortecCyclonic (a. k. a. Hoover WindTunnel "killer")

Bissell Easy Vac

Eureka Litespeed (Comes either bagged or bagless)

All have on-board tools


Out of all of them, the Hoover Windtunnel Air is going to be longer lasting on the filtration factor - I know, I have tried them all - the Eureka Litespeed is far from "Lite," and needs plenty of screws to undo if the belt breaks and came to the UK under the name of Electrolux Glider Bagless Z5740. The Windtunnel Air is similar to the Vax Mach Air I own - its very plasticky but the U.S get a standard extra long hose that we have to pay out for - it's the most modern vac out of the three listed here and has a lifetime belt as well as brush roll on/off function and washable filters. I had forgotten all about the Air model to be honest.





The Bissell Easy Vac is far from easy - easy to push yes but removal of the dust cartridge and secondary filters are messy - emptying isn't a chore but putting everything back can be - and like the Eureka/Electrolux, has a paper cone that needs to be brushed clean to keep the suction from weakening. Also uses belts that have to be replaced and no brush stop function.
imot


Joined: Apr 25, 2012
Points: 1

Re: Looking for a lightweight
Reply #13   Apr 25, 2012 6:48 pm
Hi, I was considering the very same factors when buying a vacuum cleaner for my mom. Unfortunately similar factors are true for the health department so when choosing was making sure that the operation and the transportation of the appliance will be effortless. Wanted to make sure she doesn't have to bend down to pull the electricity plug every time she leaves a room and enters a new one, also the vacuum cleaner itself had to be as light as possible. After long research and product review reading sessions I settled with the Hoover Linx cordless vacuum cleaner which satisfies all the previously set needs just fine. My mother also likes it, however she is telling me that the battery doesn't last so long and she thinks it lost from it's battery life some more since we bought it. Will buy a new battery when the battery life drops so much, that she can't finish vacuuming the house in one charge.
This message was modified Apr 25, 2012 by a moderator
Replies: 4 - 13 of 17Next page of topicsPreviousNextNext page of topicsAllView as Outline
Vacuum Cleaners Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.