Vacuum Cleaners Discussions

Ignoring my other post about canisters, I am looking for a Christmas gift for Mom.. She is getting older now and is having trouble in the strength department... She still lugs her Kirby g3 around the house, but is wanting something for the downstairs bedrooms... After listening to her describe what she hates about all of the vacuums I have brought to her here is what I need to find:

A bypass upright with the motor in the head and not the neck, no on board attachments and has the ability to go under beds..

Does such an animal exist? I'd give her my oreck that I have but the brush roll is so soft compared to the others that it really won't separate the nap and clean the floors...

Thanks in advanced!

I was thinking about that after I posted and maybe the bypass isn't a requirement as much as it would be to get weight off the body/neck so there isn't much weight on the arm. I was looking at the hoover platinum bagged vac and really liked what I was reading.

She really doesn't have a lot of traffic, just a lot of lint and what not since the laundry facilities are down where the bedrooms are.

Are the riccar/simplicity lightweights (freedom and what have you) worth their beans in anything?

jkbmmv wrote:

The Riccar Supralites and Simplicity Freedom get great ratings and user reviews. The only disadvantage, for what they are, is the noise level.  How bothersome that is depends upon the individual user.  Other than that, Riccar/Simplicity machines are sold by independent vac stores meaning price may be negotiable allowing them to be competitive as the MSRP is a little up there for a lightweight meant only to handle flooring. 

Note the Hoover Platinum bagged vac weighs in at about thirteen pounds and the Riccar and Simplicity at about nine.

Venson

Dont forget Venson though, SEBO may be expensive but the alternative is the SEBO based Windsor Sensor uprights, usually cheaper as they are based on the older X1 Auto (the one we had for 15 years.) Comes with tools and a wand, but you don't have to use it.

vacmanuk wrote:

Point well taken vacmanuk, but I think cost is an essential issue in buying especially with with the problems we're having here. 

When I had the money -- and steady work -- I bought my Mieles despite, even then, their meaning a disproportunate stretch of the budget.  However, if I had to replace a vacuum now there's no way per budget I could swing a like purchase without seriously messing up money needed for other basic but very necessary things.  The person asking has stated he's pulling three jobs.  I couldn't in good conscience recommend other than what appears conveniently affordable.   That's why I didn't even bother to mention Miele when he spoke of the "command control" he'd like to have on a canister vac.  Miele is best in show but can definitely be lived without if you have to.

Being perfectly honest, I see a decent vacuum as an essential for any household. Yet, in mine, if a replacement machine is called for I'll be buying a good refurb or used item. 

Best,

Venson

Don't let the 3 jobs fool you. I don't have the patience to do anything for too long of a time. They are all part time jobs throughout the week to just give a bit of variety. If I had just one full time job I'd go nuts doing the same thing over and over.

Now, as far as what I was looking for with this, I had 3 Windsor XP12 machines and she didn't like them because there was too much weight on the handle when she used them. Same with my Simplicity 6 series. She had a few wal-mart specials that she bought and didn't like them because they had everything on the neck/bodies and they were heavy. When I brought the supralite she actually seemed intrigued.. I think our only complaint about the machine _is_ the noise... Why would they make the machines so noisy? I mean since they are direct air machines the exhaust goes through the bag so why can't the motors be a bit more muffled? If I remember correctly, I had a post a few years ago about this very issue with commercial orecks... I wonder if a bit of dynamat on the underside of the housing would help? I guess its just a concern with her house because the noise actually echos... Oh well, I have until the middle of January to return the machine if its not tolerable.

As far as the Miele machines, I thought the s7 was the *only* actually made-in-house machine? Not that I wouldn't mind having an s7 upright if I had more carpets, but still? I did actually look at Miele first before I went with the Riccar... The prices really weren't much different, but I am wondering if this is gonna be like the whole Dyson thing, a European vacuum sold in America.. Now to my other post for the remainder of this post...

jkbmmv wrote:
Well if your mom doesn't like the XP12, she's going to hate the Miele S7. Too bulky, too big and its quite a chore turning the handle from left to right. Early models in the UK suffered from handles breaking off.

Lol, no, I wanted the s7. I thought they were impressive machines when they came out.. But then again, I liked the xp12... :/

What about the Sebo Felix or its commercial twin, the Windsor Axxcess?

Hoover WindTunnel Air

XXX VortecCyclonic (a. k. a. Hoover WindTunnel "killer")

Bissell Easy Vac

Eureka Litespeed (Comes either bagged or bagless)

All have on-board tools