Vacuum Cleaners Discussions |
|
adamlau
Location: Los Angeles
Joined: Mar 19, 2011
Points: 21
|
|
Future Buy: Rug Doctor Mighty Pro X3 vs. Kirby Avalir?
Original Message Apr 2, 2011 6:20 am |
|
To shampoo the carpet only, would the Avalir (based experiences with the Sentria and past Kirby models) be as effective as the X3 and/or vice-versa?
|
procare
Joined: Jul 16, 2009
Points: 192
|
|
Re: Future Buy: Rug Doctor Mighty Pro X3 vs. Kirby Avalir?
Reply #9 Apr 5, 2011 7:05 pm |
|
Mike W, You are right in what you said about capet cleaning. The correct term about the so called steam cleaning is hot water extraction. It had been found that real steam would damage the carpets made of synthetic fibers. One does not clean a cotton, wool, wool blend carpet with hot water extraction cleaners. Do it yourselfers have the following companies to get Shampooers that are best to use on carpets. Aerus Floor Pro, Kirby , ,and Tristar ( Aerus Floor Pro) . The Host dry powder does work but only if the people have a good cleaner to pick up the powder. Not all vacuums can clean well enough to get it out. When someone says a sticky residue is left you have to ask what brand of detergent is used . Over 95% of all shampooes leave a sticky residue. Even the Steamers do. Aerus, Kirby, and Von Schrader shampooes don't leave a sticky residue. If the pictures that are on the U.S. Patent for Kirby is any indication of what is to come they will use 2 srushes instead of the one they have now. I find it surprising to see a power head attachment. It is logical tho tyo go where the upright can't go like under the bed and some furniture. Interesting stuff. All patent info is 2005-2010.. Procare
|
Trebor
Joined: Jan 16, 2009
Points: 321
|
|
Re: Future Buy: Rug Doctor Mighty Pro X3 vs. Kirby Avalir?
Reply #10 Apr 8, 2011 4:27 pm |
|
Just,
When you try the G series shampooer, remember one capful of Kirby shampoo is enough, 1 and 1/3 if the water is hard. The suds have to be dry enough to foam, but wet enough to clean, and be picked up in the tray. Too dry, no cleaning, too wet, not enough pickup. Rinsing with an extractor with plain water and vinegar greatly enhances soil and suds removal.
|
"There is no BEST or PERFECT vacuum cleaner"
"Take care of your vacuum, then your vacuum will take care of you"
Joined: Dec 1, 2004
Points: 1683
|
|
Re: Future Buy: Rug Doctor Mighty Pro X3 vs. Kirby Avalir?
Reply #12 Apr 11, 2011 1:31 pm |
|
Just,
When you try the G series shampooer, remember one capful of Kirby shampoo is enough, 1 and 1/3 if the water is hard. The suds have to be dry enough to foam, but wet enough to clean, and be picked up in the tray. Too dry, no cleaning, too wet, not enough pickup. Rinsing with an extractor with plain water and vinegar greatly enhances soil and suds removal.
Actually, if it is "too dry", it means that it is too concentrated and will result in sticky carpeting. This will result in quick soiling of the carpeting. If the proper amount of solution is applied adequately, oils, soil, will be removed. Some will enter the tray, while the remaining will be vacuumed up after the rug is dry.
|
CarmineD
Joined: Dec 31, 2007
Points: 5894
|
|
Re: Future Buy: Rug Doctor Mighty Pro X3 vs. Kirby Avalir?
Reply #16 Apr 11, 2011 7:53 pm |
|
I would not want to vacuum a whole house with an oreck if I used a dry powder. My ORECK XL works like a charm on dry powder. Not so my dyson DC07. Terrible. Left more behind than it picked up.
Carmine D.
|
|
|