Vacuum Cleaners Discussions

Shark is going after the Dyson Ball pretty hard with the Navigator product.  It claims no loss of suction and claims its just as easy to maneuver as the Dyson Ball.  After acknowledging Dyson as the first to offer no loss of suction, they go for the throat.  They do a direct comparison to a Dyson Ball and state that they are equal in all ways (easy to maneuver, no loss of suction, 5 year warranty) but price.  For less than $200 you can get a Shark Navigator with a free steam cleaner thrown in to boot. 

Ah, sorry Carmine, I was referring to the Chinese built models spurned on by Dirt Devil -  the Vax VX series always had auto cord rewinds - and the U.S know these as the X3 / X5 but they're based on Bosch uprights and it was a collaborative effort from Bosch and Vax when they appeared in the late 1990s. Bosch only had them on the market for a limited period. Vax kept them on for longer.

vacmanuk wrote:

Yes, Bosch Siemens ran a promo in the US, buy one of their appliances and get the vacuum free.  So we have it at least for VAX, TTI, and Eureka-lux:  Cord rewinds on uprights are becoming standard issue even on the bottom of the line models. 

Carmine D.

The UK had auto cord rewinds in the 1980's on many hard box uprights from Electrolux and Hoover including the Turbopower models we had "going under the name of "Autoflex." I believe the U.S had the British models under the name of Hoover "Sovereign."



Hoover however stopped production of auto cord rewind motors in the end of the 1980s and Electrolux also followed suit. The problem seemed to be that the motors inside were forever breaking. Panasonic UK were one of very few brands in the 1990s who kept making uprights with auto cord rewinds but these are now obsolete.

I actually got to see the Navigator at Costco yesterday.  Couldn't turn it on -- no near by electrical outlet -- but got to maul it a bit.  Though not a great fan of bagless vacs, I did very much like the fact that the Navigator easily disassembles.  The bin lifts off with the push of a button and the cyclonics module can be accessed with the press opf a lever.  Another lever on the module allows it to come apart for easy cleaning to maintain optimal performance.

The "shroud" is made of wire mesh and I did wonder if it might be prone to clogging.  There is a large round filter that seats underneath the collection bin. I'd have liked a slightly more sturdy feel but reminded myself, what do you expect for only 170 bucks.  It appears that Costco has hopes for them as I saw a rather large amount of boxed up ones in proprtion to the other models they had out.

Best

Venson

Venson wrote:

Hi Venson:

One of the benefits of the Navigator is the ability to very easily and quickly remove and wash the 21 cyclones [it's called Infinity technology].  A closer look reveals 2 round thick sponge foam washable lifetime pre-motor filters atop a felt non-washable filter.  Lightweight at 15 pounds.  More maneuverable than most full size uprights on the market today, bagged/bagless.  Price is right at $160 but a bit on the chintzy side for my liking.  Nice stiff brush roll tufts but more on the order of a power head brush roll than full size upright. 

Carmine D.

CarmineD wrote:

Why would you think the lifetime filter is any more a lifetime than Dyson's? 

HARDSELL wrote:

Well if it isn't HS from the House of D:  Deez nuts.

• Since I'm old and will never buy another dyson again but will a Shark.  So the filters should easily last for my lifetime. 
• Because the 21 cyclones are washable in the Shark.  Not dyson. 
• Because the form and content of the Shark dual filters [not just one] in the Shark are better than dyson's and will withstand more washing. 
• IF Shark users wash the cyclones, less need and frequency for washing the filters. 

Next.  Pass the nuts please. 

Carmine D.

CarmineD wrote:

Hardshell:

Me thinks you had to many nuts to eat.  Your brain is turned to peanut butter. 

If you can wash and clean the cyclones [as in the Shark Navigator] they perform for a lifetime.  No need to buy a $80 dyson cyclone assembly when the dyson cyclones get filled to the brim with dirt and pet odors.  Looks a little like a nut.  Hardshell but can't get it open to eat the inside.  Or clean it as the case may be.  It's like having a permanent sealed cloth bag that just fills and fills with dirt and you can't dump it out.  In time and with use, no air gets through it.  Just dirt in and dirt out.  On a good note after the Shark patent expires on the Infinity technology [washable cyclones] dyson can steal [I mean copy] the design for its use.  $150 Shark bagless upright with easily removable cyclones for lifetime cleaning.  Remarkable.  Why didn't dyson think of that?

Carmine D.

CarmineD wrote:

You make some interesting points:

1. How in the world does Shark get a patent for washable cyclones?  

2. What does the spring do in the Dyson cyclone assembly?   Supposedly there is a spring inside the assembly that will rust if you wash the Dyson cyclones.