Vacuum Cleaners Discussions |
|
HARDSELL
Joined: Aug 22, 2007
Points: 1293
|
|
Re: Electrolux Oxygen Warranty
Reply #5 Sep 9, 2009 7:57 pm |
|
Hello Lucky1: If HS is honest with you he'll tell you that several years ago, when the Electrolux canns made the CR top rankings, he wanted to buy from BEST BUY and asked my opinion offline. I told him the Eureka lux canns were okay but to wait and shop for the sales or buy the Intensity lightweight upright. Shortly afterward, his man dyson filed a grievance against Eureka lux Intensity for claiming it outcleaned/outperformed a DC14 by 50 percent. With the ASA obviously because dyson is there. There are mixed interpretations of the ruling but basically James went home with his head down. Which I suspect is the same position HS is holding his head now after reading this post. BTW your commentary on the changes in the economy and retailers being flexible with their inventory holdings and products in order to survive and flourish is absolutely brilliant. My compliments and kudos. Carmine D. Why would I lie? My name is not Carmine. I asked the question same as others have asked opinions.
Why would I have my head hung down? No skin off my rear like Dyson took off yours.
|
CarmineD
Joined: Dec 31, 2007
Points: 5894
|
|
Re: Electrolux Oxygen Warranty
Reply #6 Sep 9, 2009 8:02 pm |
|
Why would I lie? My name is not Carmine. I asked the question same as others have asked opinions. Why would I have my head hung down? No skin off my rear like Dyson took off yours.
And HS, since you asked me like a gentleman, I answered you like one. Are you seeing the correlation? If you ask really nice I'll even answer your ORECK question. And I guarantee you the answer will get stuck in your craw.
Carmine D.
|
mole
.
Location: earth
Joined: Sep 30, 2007
Points: 783
|
|
Re: Electrolux Oxygen Warranty
Reply #7 Sep 9, 2009 8:18 pm |
|
The good ole oxylux headache, Its been going on since day one, broken hose sockets, burnt and melted wand leads,wands that snap in 2, powernozzle elbows that snap and break at the collars, melted brush roll bearings and melted housings, 40 dollar h13 filters that need changed more often than stated, broken wheels,broken bag hinges, handles that break at the pivot on the canister,cordwinder contact problems, thermal overload fuse lines that fail, hoses that collapse in no time either the machine end or at the hose handle, Other than that its a pretty nice machine. Oh yeah the bags remind me of my bagged school lunch. regards MOLE
|
HARDSELL
Joined: Aug 22, 2007
Points: 1293
|
|
Re: Electrolux Oxygen Warranty
Reply #8 Sep 9, 2009 8:33 pm |
|
The good ole oxylux headache, Its been going on since day one, broken hose sockets, burnt and melted wand leads,wands that snap in 2, powernozzle elbows that snap and break at the collars, melted brush roll bearings and melted housings, 40 dollar h13 filters that need changed more often than stated, broken wheels,broken bag hinges, handles that break at the pivot on the canister,cordwinder contact problems, thermal overload fuse lines that fail, hoses that collapse in no time either the machine end or at the hose handle, Other than that its a pretty nice machine. Oh yeah the bags remind me of my bagged school lunch. regards MOLE Your school lunch was two walnuts and a hammer.
|
retardturtle1
Joined: May 16, 2009
Points: 358
|
|
Re: Electrolux Oxygen Warranty
Reply #14 Sep 10, 2009 7:47 pm |
|
Anyone read/hear about the Electrolux [Eureka-lux] with the burnt out power head/wand contacts under warranty? Covered on channel 7 news. Very interesting. Owner paid $281 for the Oxygen from a big box retailer. Contacts failed under warranty. Owner calls Electrolux and it assures him its covered under warranty. Owner brings into an Indy, who says H-E-double hockey sticks NO WAY. Bring it back where you bought it. THE BIG BOX RIP OFF STORE. BBS says SORRY. Owner goes to Channel 7 Investigation Reports for remedy. Indy says NO WAY NO HOW I didn't sell it and I ain't warrantying it. Channel 7 goes to ELECTROLUX-EUREKA LUX who sent owner a new Oxygen. HAPPY CUSTOMER. The end until it happens again. Carmine D. HI CARMINE
No wonder it was on its way to the dumpster...hmmmm. i have it now.....and its dead. so far ive found a burnt up fuse on board....but now i see i may have to go deeper and investigate all that has been posted....the OX i have is the 7020 canister.....in perfect cond....brushroll looks new.... just my luck.
|
|
|