Vacuum Cleaners Discussions

I heard tell that there was a new Lux coming down the pike.  Anyone have any info?  Is it a new Lux or a redesigned Guardian?

Some hear tell it has a digital motor. 

Sorry, the website is wrong. I looked at the bags link for the new guardian. How do you like it?

Trebor,

For the most part I like it. The motor is very loud and high pitched. The machine needs a multiple speed motor. The suction relief does no good at all. I can't use the sidekick even with the suction relief open. Sucks upholstery and bedspreads in and stalls out the sidekick. They have a bag problem that I have brought to their attention (with their new 2 layer bag, it pulls the inner layer loose exposing a lot of the outer layer bag. I sent them two used bags at their request and they sent me a new box of bags that do the same thing. They promised to let me know their findings, but about 3 weeks ago they turned the bags over to engineering and said it would take about a week for testing. I followed up a week ago and told them I did expect a reply as to what they found. I don't think they plan on telling me anything, which po's me very much. It's obvious they have a problem.

Nice Color Combination

Comfortable Handle

Steers very well

Looks great - Nice colors

Tools store on the wand

Totally sealed system

On off switch is much better

And most importantly, it cleans very well.

Bud

Hello Bud;

You probably did already, and if so can ignore this.  In asking for a reply on the bags, you might want to also provide your positive comments to Aerus on the unit's performance. 

Carmine D. 

budmattingly wrote:

Bud, & others here:

What do you opine is the problem with the bags?

Carmine D.

The multi-layer bags were originally lined with 3 layers of what appeared to be something akin to facial tissue, soft, porous, and in need of the sturdier outer paper shell that enclosed them. The bags for the Silverado clone (called 'The Perfect') use the clothlike filter material sometimes labelled 3M filtrete, but  I think there are more brands out there now. The new Airway bags, as most new high quality bags, are made of this material for durability, filtration, strong cleaning power as the bag fills, and resistance to tearing. They are also more expensive than their predecessors, in part, because they need less frequent replacement. With a much more powerful motor, and the quality control issues involved in outsourcing it would seem the new Aerus/Lux bags are simply not sturdy enough.   During the first part of a bag's useful life in an Electrolux, the cleaning power actually increases before it begins to drop off (on average, depending on the material being sucked up) due to a favorable shift in the airflow/suction ratio.  I saw the data plotted on the parabolic curve at the Lux factory in Bristol, VA. This was born out over decades of testing. There was obviously insufficient testing of the new bags because it was simply the familiar 'C' style bag used since the model 60. The very first 'C' bag was single layer paper. The salesmen would use an entire wrapper of bags during a demo because the single layer coated quickly and the automatic feature shut the machine off after only a few tablespoons of dirt had been picked up. Thus the multi-layer bag was created out of necessity. Testing would have revealed this flaw before manufacturing thousand of wrappers, but it was not deemed necessary.  Apparently, at least in this regard, Aerus has learned nothing from history, but as George Santayana said, "Those who cannot remember the past are condemned to repeat it."

As such Trebor, should be an easy fix for Aerus. 

Carmine D.

Carmine,

I had a few bags left out of a box and also bought a new box when I purchased the vacuum. Then when I sent the bags for testing, they sent me another box. All 3 had the same issue. I also have a pro care upright. I cut one of their bags and compared it to one out of each stock I had. Procare glues their inner layer in several places including the seam where the inner layer overlaps. Aerus does not have as many glue spots and the seam where it overlaps is not glued on the seam. Thus the problem, the cyclonic action with the new more powerful motor pulls the inner layer off of an area of about 2 to 3 inches for most of the length of the bag. Obviously I don't want dust and dirt penetrating the outer bag and going through the motor. I know I have a 20 year warranty, but I have always taken very good care of my vacuums and always use the original bags that were designed for that machine. I recently purchased the new upright that matches the Lux guardian ultra. I cut the upright bag and it is the same way the canister bags are, not glued on the overlaping seam. I haven't checked it to see if the inner layer is pulling away yet. I will let you know when I do.

This kind of all started when someone on this forum asked the question. Did Aerus check the bag for performance in the new machine, since it had a more powerful motor?  I had to go look............

Sincerely,

Bud

budmattingly wrote:

Bud,

You're absolutely right.  I suspect the bag maker blew it.  Aerus needs to redeem a whole batch of bad bags and get new and better replacements.

If you haven't already, you may want to fit some a piece[s] of the bag material cut to fit the rear end of the machine's bag holder to serve as a filter barrier.  This should keep dirt/dust overflow from the bag from penetrating the motor.  The greater problem of the Aerus bags.

Carmine D.

What your seeing is the end result of outsourcing. When corporate decided to sell off the machines and tooling to eureka aka electrolux, They take what they get from china and have to live with it,UNTIL THE CONTRACT EXPIRES

This has been going on for a long time , and now that the factory is retooled the quality control is being handled again in house.

The last good bag was the grey silveado bags................

mole

mole wrote:
Hi MP:E,

Wow! You're talking way back to the mid-70s. I bought a Silverado in 1974.

Venson