Vacuum Cleaners Discussions

It's true, no more clutch.  It uses a brushroll motor.

I brought up the subjects that dyson vacuums are selling like bottles of Jim Beam bourbon to Mormons at the Temple in Salt Lake City.  And the $100-$135 repair bills for faulty dyson clutches prevent owners from repairing them and intead trading/junking.  While the latest ball dyson DC24/25 ball models are the worse sellers of all dyson vacuums and the DC25 has an inherent defect in the motor wiring harness.  So bad is the problem that makes the vacuum stop running after a few months of use.  At least one dyson dealer in Las Vegas refuses to sell a DC25 for this reason.  I opine that the dyson ball models will go the same way as the dyson ball barrow.  Oblivion.  Now say again what exactly was your responses? 

Carmine D. 

Sam's Club and dyson now bundle a DC27 with a DC16 for dual purchase.  Buy a DC27 for $479 and get  a DC16 free.  Hoping to spark a year's worth of lackluster sales at the chain for a dyson model which looks like a DC17 with a makeover.   

The predominant vacuum sellers at Sam's are EUREKA's for $150 and less.  Dyson is a fish out of water on the shelves. 

Carmine D.

CarmineD wrote:

Best Buy had a deal like this before....
FWIW: I noticed that Costco.com no longer has Dyson vacuums on there website...

Acerone wrote:
Hi Acerone,

Despite its failure to appear online Costco is carrying the Dyson DC17 in my local store for above $400. However a new addition to the roster, online and off, appears to be the bagged Hoover Wind Tunnel 2. It sells for $199 with a $30 rebate and a two-year supply of bags.

Venson

Acerone wrote:

Right on both accounts Acerone.  In fact dyson and other retailers have offered and may still a free DC16 with the purchase of any dyson.  Wonder if that works for the DC16.  Buy get one free? Two for the price of one?

Carmine D.

Venson wrote:

Hello Venson:

Ditto that for the local COSTCO store in N. Las Vegas plus a few full pallets of a DC14 Cyclonic for $329 before other discounts. 

Carmine D.

I replaced the clutch on my DC14 and it wasn't too bad.  Only because there's a youtube video showing exactly how to do it... the new clutch even came with the tools to change the belt and on of them is good for changing belts on other vacuums too (a hook with a "T" shaped handle).  I don't notice any better pick up, but the machine sure sounds lot better.  Though I must admit 40 dollars is an expensive "belt" replacement!

Vacuumfreeeke wrote:

Hello Vacuumfreeeke:

Congrats on two accounts.  First, you accomplished a difficult dyson repair for $40 rather than $90-$150.  Tho you may have wanted to replace the brush roll too for an extra $30-35.  A new brush roll may improve the pick up.  Second, you debunked the longstanding dyson claim/myth: lifetime belts never need replacing. 

Ironically, if a customer purchased a DC14 with a 5 year limited warranty and needed a belt/brush even under the warranty, he/she would have to pay for these repairs.  Why?  Considered normal wear and tear not defective.  Also ironic, Consumer Reports does not count belt replacements in reliability survey data.  Why?  Belt replacements are considered a user task and too inexpensive to count.  CR should rethink the reliability survey if it reads your post here and wants to better report on dyson repair data.

Finally, there is no wonder for the reason dyson abandoned the gawdawful noisey unneeded clutch.

Carmine D.