Vacuum Cleaners Discussions

Dyson is in the news frequently and so a dedicated thread.

.

M00seUK wrote:
Moose,
There is much more detail on the US patent application. You might want to check it out. One would imagine Dyson applying his small motor technology (the DDM) in appliances to reduce the size or use its speed gains (typically), but I do not see the DDM and controller with its higher costs inside this box. Dyson also mentions keeping costs down on this appliance.

I am not familiar with these dispensers. Can you link a couple to this thread so I can take a look?

 Thanks,
 DIB

http://appft1.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&u=%2Fnetahtml%2FPTO%2Fsearch-adv.html&r=1&p=1&f=G&l=50&d=PG01&S1=dyson.AS.&OS=an/dyson&RS=AN/dyson

CarmineD wrote:
  Hello Carmine,

 In typical fashion you twist my words. Did I say my DC15 has been relegated to the garage? The DC15 serves double duty both in my garage and home. I am beating on it deliberately. This way I can say honestly these things are bulletproof and can run well past its five-year warranty (projectied based on what I've seen thus far). It is going on 4 years old.

DIB

DysonInventsBig wrote:

Thanks - I can't see any more written detail on the US patent doc and the images are not showing for me, so I can't really add anything.

I'm of the presumption that Dyson are of the thinking "What appliances use motors that might benefit a more efficient motor part?". I'm not at all familiar with drinks dispensers, but presumably you need a motor to create air pressure and also grind / mix ingredients. If a Dyson digital motor *was* to be used, it would like be a smaller than the version used on the Airblade drier. As you say, there might not be any benefit at all and they would simply use one off the shelf.

So, what we're looking at is :-

• Small, self-contained profile
• Grinder / milk foamier optional
• 1-2 selectable hoppers for coffee / coco ingredients
• Nozzle and cup shelf retract flush when not required

This is the type of product I'm thinking of:-

http://www.comet.co.uk/shopcomet/product/290734/JURA-IMPRESSA-Z5

That is the top of the range model from this retailer, at 1595 GBP. An entry level version sells for 595 GBP.

Certainly, they're getting ever popular, the margins are there and there's efficiencies to be made in terms of size.

There's also market share potential in the commercial space. The café near my office is pushed for working space, with fair-sized espresso machine taking up room. At my local independent pub, coffee is made from a small machine with pre-prepared espresso 'capsules'. Again, they're pushed for space, but a machine of the design proposed by Dyson might work well.

Hi,

Miele and, I believe, Bosch have it on the market in "capsule" and built-in form. However, the prices make my good old Krups bean grinder and Bodum coffee maker look awful good to me

http://www.miele.com/products/models.asp?cat=5&subcat=30&menu_id=22&nav=20&snav=90&tnav=96&oT=188

http://www.miele.com/products/models.asp?cat=5&subcat=28&menu_id=9&nav=20&snav=90&tnav=93&oT=187

Venson

Hello DIB:

Sorry to misunderstand and misquote.  So it would appear if the discounted, 4 year old dyson DC15 ball is doing double duty, a new dyson ball model exclusively for household use is out of the question?  I really thought with all honesty and good intentions that you "relegated" the DC15 to the garage so you could replace it with a new dyson in your home.  Especially with the way you rave non-stop about the ball and steerability.  I envisioned you upgrading the ball models with each new dyson entrant.  As a dyson devotee like you would most likely want to do.  I mistook your praise here for putting your money where your words are.  My apologies. 

Carmine

M00seUK wrote:
Moose,

 If you go to the bottom of the front page of the Dyson application, you will see a lengthy description. As you can see/experience firsthand the United States government in my opinion has made searching patents difficult or more difficult than need be. Patent images they are in the TIFF format. Assuming you’re using a Macintosh I provided a free tiff viewer plug-in link below.

 You’re right, the dispenser could be both commercial and residential. I did not read but just a few paragraphs on the patent, I did see one of the major components is the ability to retract or telescope the dispenser nozzle back into the appliance itself which is space-saving (per the Dyson patent app.)

DIB

www.acordex.com/browseProd/VTplugin.html

DysonInventsBig wrote:
WARNING!!  DO NOT TRY THIS AT HOME WITH YOUR ORECK.

DysonInventsBig wrote:
Thanks DIB, I installed the plug-in, although I couldn't see anything that wasn't in the other patent write up.

What I think is *shocking* is that US patent site requiring people to download an  obscure browser plug-in to view those TIFF images. I mean, storing documents as TIFFs is perfectly fine, but serving them up on a web site, when web browsers don't supporting them by default is terrible! Given US citizens file a large number patents, they deserve better.

Although I'm being all self-righteous because my own web site goes to great lengths to automatically convert images in to easily readable formats! :-p

HARDSELL wrote:
... that's true.

HARDSELL wrote:

WARNING!!  DO NOT TRY THIS AT HOME WITH YOUR ORECK.

DysonInventsBig wrote:

Hello DIB/HS:

Not!.  I've posted here before, I believe, if not, here it is now.  I typically run my ORECK upright over the garage floor [where I have both cement/rug coverings], apron to the driveway [cement], backyard patio [cement/rug coverings], and walkway from the front to side door of the house [cement save a huge front door indoor/outdoor welcome rug].  Why?  It's an excellent barefloor cleaner with excellent edge cleaning.  Beats cleaning these areas any other way.  And voila, no problems steering!

Last week, I performed some outdoor maintenence to the stucco finish my home.  Repair/paint small cracks that developed after house settling.  Typically these repairs cause excess stucco finish [read tiny cement bits and pieces] to fall off and down on the ground.  To do the clean up on the walkway and patio, I went for my ORECK upright, which was the closest and handiest vacuum to get to!  And works the best for this cleaning job.  Simply amazing!

Carmine D.