Vacuum Cleaners Discussions

 The new Riccar SL5 now has a V belt with lifetime warranty.  Anyone think Oreck will finally make a change to their system to keep up?  With the SL1 and SL4 faring so well in Consumer Reports I would think David and the gang may want to finally change how their machine works.

Dusty

The Oreck isn't even best in its own class now.  The Tacony and TTI-made lightweights have since surpassed the Oreck in terms of cleaning performance AND value.  Proof that you can still be a lightweight machine and a REAL vacuum cleaner vs. a glorified electric broom or hair dryer on a stick.  And in the case of the Tacony models, also proof that you can use a lifetime belt on a single-motor upright without any problems.  Not that having a disposable belt prevents the Oreck from burning out the motor due to an obstruction in the brushroll...

A couple of years ago at the Hoover store, they had their very short-lived (due to the TTI buyout) Tacony-made Ultra Light Weight (ULW).  One of the comparisons they showed was an Oreck fan next to the ULW's fan.  The Tacony fan was considerably larger and had more blades, I forget the exact count but it was a lot more than 5

-MH

Motorhead wrote:

Hey Motor:

The problem with HOOVER outsourcing the ULW to Tacony was getting after market parts for it.  Especially the fan.  HOOVER [hence the end user customer] couldn't buy/replace the fan as a stand alone part item if it broke.  The user had to buy/replace the whole motor.   HOOVER employees and HOOVER ULW users were furious over this problem.  Wondering if that, more so than the TTI takover, resulted in the short lived ULW sales. 

ORECK fans are, and have always been, readily available and replaceable as a stand alone part item.

Carmine D.

I don't see how a Hoover dealer receiving aftermarket parts from Tacony would be any different than an independent licensed to carry Riccar or Simplicity.  Unless of course the ULW-specific fan (or other parts as such) had the Hoover name on it

At any rate, I wouldn't consider the TTI-made Hoover Clean & Light as a step backward, just Hoover going from one decent machine to another for whichever reason.  Those I've heard who have bought them love them.

CarmineD wrote:

Why would Hoover engineers let this get by them.  If you outsource the part can be built to your specs.  Sometimes it pays to have 500 engineers that know what they are doing.

I have heard that Oreck fans are not long lasting.  Perhaps that is why they are so readily available.

Actually Carmin, Hoover could get the fans seperate from Tacony, just as we can as a Tacony dealer.  The Hoover store in Denver even has the fan is stock...

Since we seem to be a bit uninformed here as to the entire life story of the Hoover ULW, I'll let everyone here know it.  Back when Hoover introduced the ULW, the agreement with Tacony was that the ULW would only be sold in the  Hoover facotry stores, so as not to put a version of the Riccar and Simplicity lightweight machine in big box stores.  Tacony is known for its commitment to it's dealers and even for a large Hoover contract would not stab them in the back.  With the fact that the Hoover factory stores are dying out, Hoover needed a machine they could sell thru the BBS and it's other far from independant dealer outlets.  This fact combined with the fact that Hoover now has access to the TTI built lightweight which was much cheaper for them, as a part of TTI to get caused Hoover/TTI to dump the ULW for a machine they made themselves and could sell everywhere.

Thank you Vacuuman for the update on the Ultra Lightweight and new Clean and Light.  Makes alot of sense.  My HOOVER sources were mid August 2006, when I purchased a HOOVER WT.  Things change.

In August 2006 I went shopping in the HOOVER stores [2 now 1] here in Las Vegas who carried and sold the HOOVER Ultra Lightweight Tacony sourced vacuum.  I expressed an interest in buying the Ultra Lightweight when HOOVER ran a $100 off sale.  Alot off on that particular model and MSRP.  Almost did! 

I asked the draws backs about buying a sourced vacuum from HOOVER that was made by Tacony.  I was told by both stores' staffs what I posted here about not getting the fans and having to buy the motor.  Opted against buying it and went with the HOOVER WT Supreme.  A good choice.

Carmine D.

Where cans one see this SL5 we speak of?  I looked on the Riccar website and the RSL4 (which I own) is the newest model listed in the supralites.

Just wrote:
It should be up on the site soon.  I've seen promo literature and hope to have the machines in the next couple weeks.  There is also a new commercial unit on the way too.

Dusty

Mike_W wrote:


The new "8lb." should be out by Aug.  They will be an improvement, eventhough there was not much to improve on.  Having a belt, that will not need to be changed often, will help. 

Mike_W wrote:

I agree, I can't think of alot on the SL4 that needs improvement.  I haven't had belt issues, though I have only had mine since Feb.  If there were any improvements I would suggest, it would be the noise level. I still think the motor is screechy, but it does a wonderful job for a little guy.