Vacuum Cleaners Discussions

You're in Canada, and it was late to the dyson sales game.  Just the last 3 years if I understood correctly.  I suspect you're getting old dyson DC07 stock before the u bend airway was made permanent.  And the dyson pics are old.  All the DC07-s now in the USA [that I have seen in stores since the launch of 2002] have a permanent u bend airway joint.  The removable one has been obsolete here in the USA.  I speak with experience in several states on both coasts.

It's an important piece.  Without it, the vacuum has no suction in the tool mode. [FYI: The DC07 pink I bought in August 2006 from TARGET had a very permanent u bend airway joint with no thumb tab to be seen and still does]. 

Carmine D.

You're in Canada, and it was late to the dyson sales game.  Just the last 3 years if I understood correctly.  I suspect you're getting old dyson DC07 stock before the u bend airway was made permanent.  And the dyson pics are old.  All the DC07-s now in the USA [that I have seen in stores since the launch of 2002] have a permanent u bend airway joint.  The removable one has been obsolete here in the USA.  I speak with experience in several states on both coasts.

It's an important piece.  Without it, the vacuum has no suction in the tool mode. [FYI: The DC07 pink I bought in August 2006 from TARGET had a very permanent u bend airway joint with no thumb tab to be seen and still does]. 

Carmine D.

Well let me say this:  The dyson u bend airway joint does NOT come come off and stay off as easily as it did with the original launch of the DC07-s.  At that time, it had a prominent thumb tab that users stepped on to release the handle.  Only to learn that the u bend air way joint fell off and no one could replace it.  The dyson Users Guide didn't address it's removal and replacement at the time  Tool suction was zip.  Frequently, the piece was found sitting along side the display models and/or still in the box in the warehouse.

My DC07 pink, now retired from service for inability to perform as well as less expensive uprights, has no thumb tab to remove the joint, has not fallen off ,and has not been taken off since August 2006.  That makes it permanent to me.  Certainly makes it retooled from the original form and design.  How's that for dyson accuracy and correctness?

Carmine D.

I think your pink was sabotaged and marked ' for sale to Carmine' .

Are you now saying that the joint is not permanent but not as easily removed?

I purchased my DC07 about 3 years ago and it had the removable joint.  I never incurred a problem with it. 

Yes, that's what I said based on a little assistance from Motor and Dusty.  It's permanent unless deliberately and intentionally removed with effort and forethought.  No longer does it fall off accidently and unintentially and remain off.

Please read my post about the Consumer Reports review and the DC07 dirt bin.  It's a dyson and CR classic.  I'm sure you never had the same problem as CR either with your dirt bin.  Doesn't mean it didn't exist.  Just means dyson, to its credit, took CR's criticism seriously and corrected the problems.  You may not recall/don't remember.  You were not posting on the vacuum Forums at the time, to my knowledge, as HARDSELL.

You're getting better HS.  Use to be you blamed my carpets: Mohawk wool loop medium pile.  Builder grade you called it.  Which it is not.  I special ordered.   Now you say the dyson vacuum was sabotaged.  If it is the latter, it was a permanent sabotage by dyson during the design, manufacture, and production.  It failed not just me but 2 other users too in their home carpet vacuuming.  You know what happens and the result.  Gawdawful ratcheting noise, brush roll stops turning, no cleaning being done.  Since all 3 of us have household pets, the constant ratcheting noise drove the poor animals wild.  Probably gave them permanent hearing loss and fear of vacuums. 

Carmine D.

Well let me say this:  The dyson u bend airway joint does NOT come off and stay off as easily as it did with the original launch of the DC07-s.