Vacuum Cleaners Discussions

CarmineD wrote:
I am amazed by your lies, Carmine.  From the time the DYSON DC07 was launched in the UK in 2000 up to today in 2008, the U-bend has always remained the same.  In addition to that, the DC07 has not been discontinued and neither has the DC14, or 15 for that matter.  The fact that there are now so many different models means that not all retailers are going to carry all models.  It was the DC07 after all, that built DYSON's reputation for superior cleaning ability.  The machine is considered bulletproof and is and will continue to be manufactured.  Independent DYSON dealers will likely carry it as an exclusive model, since it more than likely will not continue to be available at big-box stores.

There's 2 for 2.  By the way, the DC11 was not a "miserable failure" and is still being manufactured.  Only 4 DYSON models have been retired because none of them use Root Cyclone technology, they are just dual-cyclone machines.  All Root Cyclone DYSONS are still being manufactured. 

The only "miserable failure" I see here, well I see two of them.  One of them owns a vac shop selling bojack DYSON parts, and the other one is living out his last days in the desert

-MH

Motorhead wrote:

MH.

Go easy on Carmine.  There is a difference is telling a lie and speaking out of stupidity.

HARDSELL wrote:

HS:

You're right.  A liar knows better.  A stupid person doesn't.  Unlike you, I am neither.  Do you know which you are?  Answer honestly.

Carmine D.

Motor:

You were wrong on the ORECK stores.   You're wrong on the U bend airway joint on the first DC07-s launched here in the USA.  It was a detachable/attachable tube.  With a thumb tab.  Customers mistook the tab for a handle release.  Stepped on it.  It came off and most store staff didn't know how to attach.  The dyson manual was of no assistance.  When it was off, the dyson had no suction in the tool mode.

We have an expert here, Matt mmc [Airblade], who clarified this matter once before on a Forum.  He can do it again for you!  Matt would you like to chime in here and bail out one of your fans?

I hold in abeyance my responses to some of your other commentary until this is resolved. 

Carmine D.

Wrong on the Oreck stores?  Explain please.  9 times out of 10 with any store, the staff is overly friendly and enthusiastic due to being desperate for business.  And yes, I was the sole visitor on more than one occasion. 

As to the U-bend, it's not difficult to reattach at all (just snaps into place) and really tells me a thing or two about the IQ of sales floor staff...not DYSON's problem, but the problem of the bumbling morons working at Best Buy and other places.

-MH

Motorhead wrote:

Dyson was not meant to be for the mentally challenged like Carmine.  He needs something simple like Oreck. 

CarmineD wrote:

My apology Carmine.  You are both.

Is this a riddle?

mole wrote:
http://www.engadget.com/2008/06/13/genepax-shows-off-water-powered-fuel-cell-vehicle/

Dusty

Motorhead wrote:

Motor:

Try again.  Think.  You said new ORECK-s were sold only through ORECK stores.  WRONG.  Many indy-s, as I told you and you accused me of lying, sell new ORECK-s and have for years.  After I told you, a customer here pointed out your error when she demoed a new ORECK at an indy.  You subsequently were told too the same as I told you by a personal/professional friend.  And admitted the error here in a post.  Think and act before you falsely accuse others of false statements with untruths yourself.  As MOLE says:  Rookies!

I agree with you about the lack of vacuum savvy among big box store staff.  Dyson chose this venue.  [Could have used the ORECK model which was the context of the posts' exchanges we had for the subject of the paragraph above].  Dyson didn't.  Dyson made the mistake.  Truth be told, sales staff  are not trained well by the dyson reps.  I've heard complaints about the dyson reps from store staffs all over the country.  And still.  One dyson rep who left a big box retailer right before I arrived failed to advise the store sales staff of the new filter maintenance on the DC24/25.  Both dysons were displayed unused on the end cap.  I pointed out to the manager who quickly blamed the dyson rep for the mistake[s].

Easy or not, [and it appears you are now agreeing that the u-bend air way joint was removable just as I said], dyson corrected it by making it a permanent fixture on the DC07.  After the USA launch and the problem surfaced [thanks in part to dyson critics].

Carmine D.

Motorhead wrote:
Hi Tom, I mean M.H.,

I am glad that you have such a high opinion of me,

FYI, i own more than 1 little vacuum shop, have been in this business longer than you and your so called buddies have been alive.I can not believe the xxxxx that you expel from that DYSON infected brain of yours,

Why dont you tell the forum about your expertise in having forums shutdown? About the near criminal episodes you and your bunch, Hows things at the vacuum collectors club,i hear you have 3 members now.

I bet that it really burns you that many dealers wont sell dyson just because you have been involved with it. I  hope your new job at dyson  bars you from using a computor,you worthless maggott.

mole