| Name |
alan |
| Email Address |
private |
| AIM |
|
| YIM |
|
| ICQ |
|
 |
| Gender |
|
| Age |
|
| Location |
|
|
| Personal Quote |
|
|
| Privileges |
Normal user |
| Rank |
|
| Points |
12 |
| Number of Posts |
12 |
| Number of Reviews |
0 |
| Date Joined |
Dec 6, 2007 |
| Date Last Access |
Oct 27, 2009 8:32 pm |
|
 |
Toro 521 Removing Pulley from Auger ???
#1 Oct 18, 2009 5:53 pm |
|
I need to get the Auger out to Relpace the Gear. But cant get to the 2 Bolts that hold the Pulley onto the Auger. Is there a trick ? Thanks
|
 |
Re: 1987 Toro 521 Belt Adjustment ?
#2 Oct 2, 2008 9:50 am |
|
So The Belt should not touch the Guard at all ?
|
|
|
1987 Toro 521 Belt Adjustment ?
#3 Oct 1, 2008 2:09 pm |
|
I just replaced both Belts on a toro 521. Is the finger ( Bar) that sitts to the side of the Pully off the Engine for both belts just a Guard ? Or is it supposed to keep tension on the Belt Or Belts?
|
|
|
Toro 1987 521. What Type of lube for the gearbox -Wormgear ?
#4 Sep 29, 2008 1:54 pm |
|
Is the gearbox supposed to use a 90 Weight oil or grease? I took the plug out expecting to be a 90 Weight oil and it looks lie it is grease in there ? To my confusion I looked at a manual for the Toro Powershift and this is what it stated.. Lubrication is supplied by an SAE 90 weight extreme
pressure (EP) gear oil with an API rating of GL-5 or GL-6.
This is necessary because of the temperatures and
pressures provided by a worm helical gear arrange-
ment. Do not use Lubriplate(R) Mag 1 grease in the auger gear box |
|
|
Toro Model 38510 / Serial 9001844 Relacing the Gear-Helical, is there a key that holds the gear on ?
#5 Sep 23, 2008 9:46 am |
|
Hello, I am trying to replace the Gear-Helical On a Toro 624 Powershift Model 38510 / Serial 9001844 . Is it a key that holds the gear on the Shaft? How do you remove it? Thanks, Alan |
|
