Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > A little funnel helper.

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:

mrmom

Joined: Sep 19, 2003
Points: 345

A little funnel helper.
Original Message Feb 11, 2005 2:02 pm

Recently purchased a small Mr. Funnel. I normally load gas by just pouring it directly into the OPE tank. But since I now use the funnel, one hand has to hold the funnel and the other, the gas can (which can be heavy when full). Fuel just about overflowed the first time I used it as I could not really see the fuel level rising. A non-issue with plastic tanks as you can see the fuel level (the blower has a steel tank). I eventually ended up cutting off the upper part of a clear plastic soda bottle and using it as a funnel helper. Now both hands hold the gas can and I can also see the fuel level.

Works great and you just can't beat the price too!

This message was modified Feb 11, 2005 by mrmom

Replies: 2 - 11 of 21

All

View as Outline

Ben07

The more you know about something, the more you find there is to know.

Location: Pittsburgh, PA
Joined: Feb 26, 2004
Points: 178

Re: A little funnel helper.
Reply #2 Feb 11, 2005 2:39 pm

That is great, I am gonna make one right now. Hate to have to drink that soda so I will have to make two by using soda bottle and a half gallon vodka bottle. The vodka will help make tha soda go down better an i will get a two-fer. Then with the buzz on will use that as an excuse to do something stupid like go out and buy another snowblower for the other funnel.

You know you can get rich inventing the better mousetrap. go get a patent before Toro see's it

Ben07

P. S. that looks like a quality snow blower Honda I think? Let me know if it is for sale in a couple minutes from now.

This message was modified Feb 11, 2005 by Ben07

Ariens 8524LE, Toro CCR2000, Jacobsen S-B S-blowers, Generac 10hp Gen-convt. to N.G., 5 L-boys(D's F's &Dura( 74,77,80,88,00), Antiq. 1960 AYP 20 in. mag w 3.5 Tech mower. Ryan/Ryobi gas Trim. AYP 205 gas blwr. Mac c-saw,Toro E-blwr, 2 Weed-E e. stg. trims. outboards, boats, util trail, 2 Jeeps

jodyand

Dodge
you drive the Rest I drive the Best.
That thang got a Hemi?SWEETTTT

Location: Pride La.
Joined: Apr 15, 2003
Points: 197

Re: A little funnel helper.
Reply #3 Feb 11, 2005 2:46 pm

Very good job that goes to show where theres a will theres a way

AJace

I have an Ariens 926 Pro because I like Orange

Location: Near Gettysburg
Joined:
Points: 969

Re: A little funnel helper.
Reply #4 Feb 11, 2005 3:05 pm

Yes, a very straight cut as well.

Ariens 926 DLE Professional; Toro S200; Craftsman LT1000, Echo ES-230;

MountainMan

Overpowered is Usually Adequate

Location: Connecticut
Joined: Feb 19, 2003
Points: 1564

Re: A little funnel helper.
Reply #5 Feb 11, 2005 3:14 pm

GREAT GOING

ABout time Ive seen a Great post in a few weeks.

Ariens 1128PRO- Honda Generator_ Husky 480-257 Jonsered 2050Turbo- Shindiawa T2500 SCAG Mower -little wonder blower-Sears track blower-Coleman Generator- Bombadier ATV-Stihl HS-45 Etc-Etc-Etc

Marshall

As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )

Joined: Sep 16, 2002
Points: 7730

Re: A little funnel helper.
Reply #6 Feb 11, 2005 3:28 pm

Genius!

Emmo

Joined: May 22, 2003
Points: 1065

Re: A little funnel helper.
Reply #7 Feb 11, 2005 3:29 pm

Great idea Mr.

I'll cut 2, 1 flat for my generator and mower and another for my 3650 blower at an angle. The shroud around the tank is sloped, not flat.

This message was modified Feb 11, 2005 by Emmo

TomP

Once you go Mac you never go back!

Location: Central New Jersey
Joined: Aug 4, 2003
Points: 648

Re: A little funnel helper.
Reply #8 Feb 11, 2005 5:42 pm

Very nice mrmom very nice.

Mr. Funnel may also think so and charge an extra $5 for the Mr. Funnel Spill Preventer.

Are you going to patent this?

Snow Team:

Simplicity 1060 DLXE - Toro Snow Commander / 3650 - Honda HS520

patsfan

Joined: Jan 19, 2003
Points: 495

Re: A little funnel helper.
Reply #9 Feb 11, 2005 5:54 pm

AJace wrote:

Yes, a very straight cut as well.

Yes, how did you get such a straight cut ? in a lathe ? QUITE INNOVATIVE!

formerly OT

bmwe0692

"Have a great and glorious day"

Location: Iowa
Joined: Dec 4, 2004
Points: 79

Re: A little funnel helper.
Reply #10 Feb 11, 2005 6:51 pm

Necessity is the motherhood of invention.
I think someone famous said this.
Nice solution to a bad problem.
T.J.

Put it where the Big iron wheel runs!!!

mrmom

Joined: Sep 19, 2003
Points: 345

Re: A little funnel helper.
Reply #11 Feb 11, 2005 6:54 pm

I drew a line with a marker around the bottle then used box cutters and took my time. The few areas that didn't come out straight were just trimmed off with a pair of sharp scissors. Simple!

Replies: 2 - 11 of 21

All

View as Outline