Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > What to use in a chute to prevent clogging?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Axis


Joined: Dec 25, 2012
Points: 20

What to use in a chute to prevent clogging?
Original Message   Mar 4, 2013 10:31 am
Using a circa 1968 Ariens.  The inner part of the chute, especially at the angle, is a rusty and heavily dimpled area. 

What's good to coat the inner part of the chute with so snow, especially slushy EOD snow, won't stick to and clog it.   Am I better off using a really slippery high gloss paint first, just coating the rust with silicone... what's a good prep and finish?

I've read of after market impeller kits that'll throw snow a great distance and imagine that'd help, but that's a lot to add to this old guy.

Thanks.
This message was modified Mar 4, 2013 by Axis
Replies: 1 - 7 of 7View as Thread
Replies: 1 - 7 of 7View as Thread
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42