Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Then while I was at the end of the drive w/ 8-10" of snow in 1st gear it stoped moving, The wheel's were not spining it just stoped moving.

I put it to rev. It moved in Rev great, then back to 1st & it went along fine till it did it again.I did the same move Rev went backwards then it was fine again.

I spoke with my dealer he said O just a cable adj. I will send someone to your house to adj it. Well when I got home it was gone. they took it in to make repairs. Just wondering if anyone had this happen to them.

My Dealer seems great he has been in bussiness for a long time My first buy from them, so far GREAT SERVICE.

Brent

   The Buck

Semi Pro Archer

Hunting

Golfing

X -Inboard Hydroplane Driver

That piece with the gear shift notches also holds the cams. I measured from the back edge of the dash to the back outside surface of that piece and it is 13/4". I think if that piece is welded too far forward, that in addition to making it difficult to shift into the 6th gear notch, it would also pose a problem with the flat metal piece with the gold spring catching onto the cam and holding the right side handle down. This could be the problem with your machine.

Jonathan

Another Ariens QC problem ! ! !

                                                        Fred   

That was my thought also when you said it only worked with a fast slap when running, My guess was you were getting a lil more clearance (help) due to the vibration.  No I am not 100 percent it all happens under the dash.  when I looked last year I was pretty sure it worked all on it's own,  can't see why they would tie it into anything else..  Will try an look this weekend Just not easy to get to now. being we were gonna get long stretch of warm weather, i put it in a shed,  then had to temp store some furniture in front of it.  I have another SB in my garage.   sry picked the wrong one to bury.  or I would have given it a thorough look for u by now.

Ben07