Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

LCT and Loncin are getting their names out there.  Now Toro is going with Loncin.  Ariens has LCT on all three of their Sno-Tek blowers.  Husqvarna has the new revived LCT Snow King (Tecumseh "revival") on some of their blowers.  So who's best?  Will Briggs end up putting engines only on their own Simplicity, JD, Snapper models?

We had a Pinto that was in a city where I used to live and on teh back it had a sticker acroos teh entire back bumper that said

DANGER! EXPLOSIVE!  I think it had radiation decals as well.

No idea what year but this was like 10 years ago. It wasn't all rusted out which is a miracle for New England winters.

Of course it might have been all bondo under the paint.

I remember giving the Ford Pinto, and it's twin brother the Mercury Bobcat, a wide berth when traveling near either one....

Ford Pinto - There's no subsitute.  Nothing can be uglier  :) 

Ford's answer to the Porsche 924

Don't forget the AMC Pacer or even worse the Yugo whose seats felt like they were made of clay.

Pontiac Aztec was voted ugliest car of all time! The Pinto was similar to the Pacer which looked like a pregnant turtle.

My Toro snowblower looks like a Ferrari compared to those cars!

Loved my 'ole Pinto, 1971, 2.0L, ran it in P pure stock at Dover Plains and Lebanon Valley dragstrips back in the day, 17.89 times +/-. Chewed up Opel GT's, Duster 318's, etc. , gas was cheap also. A bit off topic but I felt good commenting on this great site....................keep up the good work.......

borat wrote:
Sorry, I hate to interject and derail this thread :)

It's a good point that time will really tell how reliable the Chinese engines really are. Otherwise it's easy to fall prey to what could perhaps be called Consumer Reports syndrome, rating things based on how they perform after 3 weeks, not 10+ years (when an MTD gets a better rating than a Honda). But my other concern with the "off-brand" engines (regardless of country of origin) is whether you'll be able to get parts in 5 years, never mind 25 years.

And how many engines will be retired before their time because you can't get a carb rebuild kit for them? Or because no info is available, like service manuals, or parts lists? It's tough to try and order "the little round metal thing with the hole in it", especially when you can't find a local dealer for that brand, but you'll have more luck if you know you're looking for part 9327481.

Personally, that's one of my biggest fears with these engines (though maybe it's an unfounded fear). Even though Tecumseh is gone, I have been able to get the parts I need so far. And the service manual has been a big help, as well as experienced & helpful people on forums like this. But as the industry fragments with a greater number of smaller manufacturers, I can see things becoming more difficult.

I see it as somewhat the same principle as Craftsman vs. whoever (Toro/Ariens/Honda/take your pick). It's hard finding other people who may have experienced the same problem that you're having with your 917.243783 snowblower/tractor from a few years ago. That size model may have been built by AYP that year, and someone else the year before. But a lot of people may have the Ariens ST824 (or Toro equivalent, etc) which was made as largely the same machine for a number of years, and there's more of a knowledge/history base.

A lot of people have worked on Tecumseh 8hp L-heads. Fewer people have worked on a Brand X, Model Y, which may not even exist next year, or may be under a different name. As an easy example, Harbor Freight sold Greyhound engines, now they sell Predator. That's 2 brands in ~2 years. And that's as many brands as Briggs and Tecumseh gave us in, what, 70+ years?

I think the reality of what's ahead is Chinese engines as well as many other products are here to stay for quite some time - like it or not. There's a billion person workforce with little to no environmental regulation, no OSHA type enforcement of health and safety for the workers, little copyright or trademark enforcement, etc, etc,..... the list goes on and on and on! The only way these Chinese companies are going to survive (for the long term) is if they produce a quality product, make a good name for themselves, respect their workers and stand behind the product they produce. At some point they will need to gain the respect of the western countries who are purchasing their goods and provide some modicum of environmental concern, worker health and safety and conformity to the copyright and tradmark laws that exist in the "real" world.

FrankMA wrote:

That is all true Frank, but the Chinese do not operate that way. Their current workers want more pay more benefits etc...

So the Chinese Gov't is moving work further inland where there currently is little to no work available. So more cheap labor.

They are having to build new roads and infrastructure but they are ok with that. They will keep finding new workers further and further from the coast until the cost of shipping wipes out the difference in pay.

Quality is trivial they want "good enough" products, cut corners anyway they can and maximize profits. They make copies of copies of copies of originals.

Branded Nike shoes sold in the Philippines as genuine are copies from China but they have the original's price for example.

Can't entirely agree with Steve.

Their quality cutting in pursuit of more profits might happen with unauthorized pirating of various products.  However, when a company such as Ariens for instance, contracts Chinese to supply engines, I'd be confident that Ariens did their homework.  I would have to assume that they laid out their contractual agreement to ensure a certain level of quality, dependability and durability is met.  I would also assume that Ariens likely test engines on a regular basis as part of their own quality control program.  After all, supplying lemon engines on an otherwise quality machine would not make very good business sense now would it?

You are still going to see batches of QC issues, manufacturing I know quite well. I read a fair amount about what is going on in China and the problems they have.

Ariens has their own QC dept you can be 100% certain of that. Most companies do. The thing is you can't test every engine. You test it in lots like every 1,000 engines or whatever number they feel is appropriate.

As the old saying goes "Many a slip twixt the cup and the lip."

Now when a company finds a bad product on a teardown they will stop and start checking a huge amount of product until they get to both ends. The defective batches are more frequent than people realize.

Many companies catch it and it's good, but cutting corners is SOP in China and goes on daily.

This isn't just Ariens or Loncin or just snowblowers this is almost everything they produce. I've seen a lot of screwups in our own shop and I know how we fix things. Or rather did since the plant will be shutdown for good in a few days.