Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I am having trouble obtaining two small parts for my new Deluxe 30 with cast iron gear case.  I need to get this beast ready for snow - she's hungry!  I Have looked at a popular retailer online and twice within a week have been told they have to call Ariens, add it to the database and they'll call me back.  But they haven't.  I need the auger gear case fill screw and washer,  They are item numbers 06400020 and 07400110.  Does anyone know a good source?  Can I Call Ariens direct?

Thanks,

Dave

zavdavpam wrote:

The dealer is probably looking through PartSmart which is revised quarterly, hence the information is always up to 3 months obsolete. If you look up the owners manual on Ariens.com, it gives the seal washer part number in the service parts section, the parts manual will give you all the part numbers, as will the Parts Radar online search. The place your looking is the only place -without- the latest information. Your earlier posting said you stripped out the top cover. Why then are you only looking for a new filler bolt and washer? You'll need at least a new top cover and washer. Inspect the screw and gasket for damage. Get the OEM part numbers you need from one of the sources on Ariens.com and order them through your dealer. And yes, they are special parts. Semblex Rolok filler screw and a concave bonded seal washer, you won't find these at ACE. Use the OEM parts, anything else and your warranty is void (all 5 years of it). When you reinstall everything, make sure to reference the latest owners manual from the Ariens website for torque specs for the filler screw. The torque specs for the top cover are in your previous thread. I hope this helps.

Snowmann wrote:
They did have the cover and gasket in stock.  It was just the fill screw and washer that wasn't.  They did order them for me from Ariens so I hope to do the repair this weekend - carefully.  I guess it's better to err on the loose side with the cover and fill screws.  I have no confidence using the tourqe wrench.  Curois though... Is the fill fill screw actually supposed to be tourqed to 12.5 foot lbs?

The replacement filler screw will be superseded to the latest part (a concave rubberized sealing washer). The torque spec for this style washer is 80 in-lb (6.7 ft-lb). The rubberized washer seals at a lower torque accomodating more variability for those not using a torque wrench.