Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Help, have new 2012 Honda HS928 have questions.

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Whoha


Location: Minneapolis
Joined: Nov 5, 2011
Points: 35

Help, have new 2012 Honda HS928 have questions.
Original Message   Nov 5, 2011 10:11 am
I just picked up a 2012 Honda HS928K1WA. I just replaced my Yamaha YS828 and am clueless  on Honda's Hydro-static trans..

How do you use it?? If I put it is what would be speed 3 and engage the clutch it clunks and does an instant engagement. There is no slipping the clutch so to speak no matter how slow I engage it or how fast.  OR do I have to always have to have it in neutral and ease it up to speed every time I have to start out. If so, that would suck. HELP!!
Replies: 6 - 15 of 62Next page of topicsPreviousNextNext page of topicsAllView as Outline
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: Help, have new 2012 Honda HS928 have questions.
Reply #6   Nov 5, 2011 7:08 pm
The library closes in 5 min...
Whoha


Location: Minneapolis
Joined: Nov 5, 2011
Points: 35

Re: Help, have new 2012 Honda HS928 have questions.
Reply #7   Nov 5, 2011 8:59 pm
I would of went with a Yamaha,  but they are only available in Canada,  track drive only,  and I want wheel because of having  two small driveways with lots of 180 turning.  A 9hp is $3,800, to 4,000 So that is out of the question.  I know  there is no option because you get what you get, but defending a bad design of implementation because you are a Honda fan makes no sense.
I know I will get use to it, but having to pull back the speed handle every dam time you let off the clutch seems like a half ass way of design. It is missing a key element to make it work like the rest of the snowblowers in the world. Having a valve that brings on the oil flow from 0 to 100% in 2 to 3 seconds to stop the clunk  and save the abuse on the tranny would seems so logical. This valve would work going  any speed you  would preset your  snowblower at. FWD or REV.  Problem solved and then it would run like any other snowblower.

How do you know people have not complained? Why would not any of you see it? I did, right away when I brought it home, and I am  just an average guy.   I will be sending an  email off to Honda so at least they get one complaint for a better way of implementation of the Hydro-drive. I know by the end of the season it will be like driving a clutched car and I won't even notice it, but at first glance it seems they could of went one step further to make it right. We are paying the premium for a Honda.  BUT then again, there is the Acura TL and Odyssey tranny issue that plagues those models too. Honda needs to fire their  tranny guys, it seems to be their only real problem as a whole. Everything else is top notch.

When chewing up an end of the driveway  that a snowplow left I may engage the clutch 4-5 times while chewing up the massive snow heap. I will have to change my style to a less aggressive Mr. Rodgers way of snow blowing :) ( joke, don't take it in the wrong way)


http://old.nabble.com/file/p31817286/2011_SB_YS928J_l.jpg


http://www.abbysguide.com/ope/discussions/55741-0-1.html
This message was modified Nov 6, 2011 by Whoha
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Help, have new 2012 Honda HS928 have questions.
Reply #8   Nov 5, 2011 10:50 pm
Perhaps the problem is specific to your snowblower.  I've had not noticed that it was abrupt.  I don't expect to do clutch dumps on a regular basis on a $2500+ snowblower.

Maybe you should try testing out another snowblower at the dealer to see if it behaves the same.  If it doesn't, then maybe your unit needs work or adjusting.  If it does the same thing, decide if you can tolerate it and get used to it, learn how to feather the clutch, or ease the drive lever to speed.  If not, try other brands, do a clutch dump on all of them and see which one is the softest.

I'm not trying to defend how Honda implement their hydrostatic transmission, I never operated a Yamaha with hydro trans so I don't know if the Yamaha handles clutch dump as gracefully.  Maybe Honda should put in a slipper clutch or hydraulic bypass valve.  Who knows?  Perhaps the next generation of Honda snowblower should be a softer and kinder design.
This message was modified Nov 5, 2011 by aa335
Whoha


Location: Minneapolis
Joined: Nov 5, 2011
Points: 35

Re: Help, have new 2012 Honda HS928 have questions.
Reply #9   Nov 6, 2011 12:07 am
I am waiting till I run it on the first snow. I will call the dealer that is 50 miles away and see what they say.  As for my old  Yamaha, it was a conventional disc drive, not hydro-drive.  The new Yamaha's are Hydro.  I will ask the question on the Yamaha board and see what the new Yamaha's are like.


HERE IS WHAT I POSTED ON THE YAMAHA BOARD

I need a description or characteristics of how the Yamaha hydro drive works.

Here is why. I just bought a 2012 Honda 9hp two-stage  wheel model to replace my 1988 YS828. It has a hydro trans. I am just curious how the Yamaha's is compared to the Honda's. My problem is the tranny on the Honda clunks and does an instant engagement with no slipping to start with when you push in the clutch like I do on my YS828 and any other snowblower I have owned or used.  Even feathering doesn't work.  I posted this weird characteristic on a  board with a lot of Honda users and  it seems some of the Honda guys have to pull back the hydro drive "speed" lever to neutral every time they let go of the clutch  so they can engage the clutch and THEN advance the speed lever to go from  zero to what ever speed they pick. Otherwise the trans violently engages if you just push in the clutch like any other "disc drive" snowblower that has smooth engagement.  Some think I could have a bad tranny ( I will call dealer Monday)  

Too many people for my liking  seem to do the pull back to neutral and THEN engage the clutch and push on the speed lever to make me think this is a design flaw that everyone has lived with. If so it is a crap design and an incomplete design. The more logical design would be to add a valve that would increase flow from zero to 100% in 2 to 3 seconds to what ever the speed lever was set at when the clutch was engaged. This includes FWD or REV. This would make starting a smooth affair and wouldn't hammer the trans.  Then it would run like any other snowblower that I have ever seen or used.

Always having a hand on the speed lever and dicking around with it seems flawed to me.


How do the Yamaha's with hrdro tranny's work, like Honda above???
This message was modified Nov 6, 2011 by Whoha
trouts2




Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328

Re: Help, have new 2012 Honda HS928 have questions.
Reply #10   Nov 6, 2011 6:19 pm
    At least on my three machines the clutch can be feathered but no where as easily as on a friction disk implementation.  With practice it would probably be easy to feather but why bother?

    When I do start off in high it's usually only to travel so a quick start is no problem. 

   Inserting a delay would be a bother most of the time when you just want to get going.  Maybe Honda could install and adjustable delay, voice activated. 

MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: Help, have new 2012 Honda HS928 have questions.
Reply #11   Nov 6, 2011 6:28 pm
Voiced activated via iPhone using Siri.
Dr_Woof


Don't blow into the wind, and don't eat yellow snow. WOOF!

Location: Saskatchewan
Joined: Dec 13, 2010
Points: 253

Re: Help, have new 2012 Honda HS928 have questions.
Reply #12   Nov 6, 2011 9:57 pm
Well...you guys down south are stll way behind.  Rumour here in Canada that the new Honda RC928TAC (only in Canada) will have remote start so you can start it without leaving your warm house.  And then.....the remote also controls operation and that means you can sit in your living room and control it while the snow flys.  Just like those RC airplanes the kids fly.   Eat your hearts out.  But still no drift cutters as standard equipment.

Whoha


Location: Minneapolis
Joined: Nov 5, 2011
Points: 35

Re: Help, have new 2012 Honda HS928 have questions.
Reply #13   Nov 6, 2011 11:10 pm
Then I will have to wait till the snow flies to get some user time on it to see if I can get it to engage without the  clunk. I think I do have to then except that it is a Honda and one of the only things they suck at is automatic transmissions, no difference here too I guess.  Thanks for the help.
This message was modified Nov 6, 2011 by Whoha
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Help, have new 2012 Honda HS928 have questions.
Reply #14   Nov 7, 2011 11:59 am
Whoha wrote:
Then I will have to wait till the snow flies to get some user time on it to see if I can get it to engage without the  clunk. I think I do have to then except that it is a Honda and one of the only things they suck at is automatic transmissions, no difference here too I guess.  Thanks for the help.

I'm not fond of Honda (automobile) brakes, engine power, or styling (Acura!).  They don't suck at it, but aren't great either.   

Transmission, yes, they do suck at that.  
This message was modified Nov 7, 2011 by aa335
mikiewest


Joined: Dec 29, 2007
Points: 262

Re: Help, have new 2012 Honda HS928 have questions.
Reply #15   Nov 7, 2011 8:44 pm
I have a 2001 accord and at 35,000 miles, I had to have the tranny rebuilt.But Honda took care of it and I had the tranny warranty extended to 100,000 miles.I now have 177,000 miles and she purs like a kitten.bullet proof engine....... crappy tranny....
Replies: 6 - 15 of 62Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42