Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I just picked up a 2012 Honda HS928K1WA. I just replaced my Yamaha YS828 and am clueless  on Honda's Hydro-static trans..

How do you use it?? If I put it is what would be speed 3 and engage the clutch it clunks and does an instant engagement. There is no slipping the clutch so to speak no matter how slow I engage it or how fast.  OR do I have to always have to have it in neutral and ease it up to speed every time I have to start out. If so, that would suck. HELP!!

    At least on my three machines the clutch can be feathered but no where as easily as on a friction disk implementation.  With practice it would probably be easy to feather but why bother?

    When I do start off in high it's usually only to travel so a quick start is no problem. 

   Inserting a delay would be a bother most of the time when you just want to get going.  Maybe Honda could install and adjustable delay, voice activated. 

Voiced activated via iPhone using Siri.

Well...you guys down south are stll way behind.  Rumour here in Canada that the new Honda RC928TAC (only in Canada) will have remote start so you can start it without leaving your warm house.  And then.....the remote also controls operation and that means you can sit in your living room and control it while the snow flys.  Just like those RC airplanes the kids fly.   Eat your hearts out.  But still no drift cutters as standard equipment.

Then I will have to wait till the snow flies to get some user time on it to see if I can get it to engage without the  clunk. I think I do have to then except that it is a Honda and one of the only things they suck at is automatic transmissions, no difference here too I guess.  Thanks for the help.

Whoha wrote:
I'm not fond of Honda (automobile) brakes, engine power, or styling (Acura!).  They don't suck at it, but aren't great either.   

Transmission, yes, they do suck at that.  

I have a 2001 accord and at 35,000 miles, I had to have the tranny rebuilt.But Honda took care of it and I had the tranny warranty extended to 100,000 miles.I now have 177,000 miles and she purs like a kitten.bullet proof engine....... crappy tranny....

I called the dealer and talked to a service guy,  said  just try to ease it on slowly as best you can. He knows it is not the most refined trans, but says they don't get many trashed trans even though it seems to hammer the trans a bit.  So that's that!

@Whoha,

Where did you buy your Honda HS928WAS from?

Whoha wrote:

I had a 928TAS and yours sounds nothing like mine. The tranny in mine was very smooth, no hammering required.

I have a 928wa 724wa 624wa and an 1132ta. All smooth and I love the trans. Nothing better. Forward to reverse any speed no releasing the clutch.