Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > What do I do??
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
stresst
Location: The Village in the Middle of New York
Joined: Dec 11, 2010
Points: 213
|
|
What do I do??
Original Message Oct 28, 2011 10:52 pm |
|
Many of you know I have been throwing the idea around of either selling my Toro 826OXE or having an 11hp from the 1128OXE installed. Anyway I had it up for sale but people wanted to pay like 600 bucks! Mind you I paid nearly 1600 less then 10 months ago! So with the first reports of snow falling north and west of the city I have the snow blower loaded in my fathers van ready to go to the dealer. Do I just have it serviced and continue to try and sell it (really dont want to invest more $$) or do I have them install the 11HP engine? The dealer wants 120.00 + any parts to do the service. Now if they swap the shortblock this 120 gets washed away as they need to do an oil change, new plug, adjust belts, etc once they install the new engine block. What do you think I should do?
TORO 826OXE
|
aa335
Joined: Nov 29, 2008
Points: 2434
|
|
Re: What do I do??
Reply #15 Oct 30, 2011 4:49 pm |
|
I will tell you what a 208cc engine on a SS unit has to have some power to weight ratio!!! There are some two stage units that weigh 200+lbs that have a 208cc engine and nevermind a 150+ weight differance some of the power gets used up propelling the wheels! The snapper/simplicity must be like a tracked honda of SS units! I think you should get it, it has the largest engine for a single stage from the factory. The Toro is very good even with just a 163cc 4-stroke engine, 208cc is just even better. With that said, I'm not sure if you are aware of this little know fact. The Toro 621 is designed on a platform that can accomodate either a 2 stroke and 4-stroke engine. The cowling is bloated, and that's not by mistake. It's seems it can fit 208cc or larger size engine. I wouldn't be surprised that a 250cc may find it's way in there. But you know Toro is not going to play that game. They're already successful enough with their smaller engines. The last time they built a super single, it was too heavy and expensive, 125 lbs.
This message was modified Oct 30, 2011 by aa335
|
stresst
Location: The Village in the Middle of New York
Joined: Dec 11, 2010
Points: 213
|
|
Re: What do I do??
Reply #16 Oct 30, 2011 5:15 pm |
|
I think you should get it, it has the largest engine for a single stage from the factory. The Toro is very good even with just a 163cc 4-stroke engine, 208cc is just even better. With that said, I'm not sure if you are aware of this little know fact. The Toro 621 is designed on a platform that can accomodate either a 2 stroke and 4-stroke engine. The cowling is bloated, and that's not by mistake. It's seems it can fit 208cc or larger size engine. I wouldn't be surprised that a 250cc may find it's way in there. But you know Toro is not going to play that game. They're already successful enough with their smaller engines. The last time they built a super single, it was too heavy and expensive, 125 lbs.
So your telling me I should take the 250cc from my Toro 826OXE and install in the 621 that I didnt buy yet? Great idea! Thanks! LOL
I would prefer to get the Toro SS being they match perfectly but the Simplicity SS looks so much more "beefier", nevermind it has a halogen light and fuel guage! Gonna be a hard decision!
TORO 826OXE
|
aa335
Joined: Nov 29, 2008
Points: 2434
|
|
Re: What do I do??
Reply #19 Oct 30, 2011 11:15 pm |
|
So your telling me I should take the 250cc from my Toro 826OXE and install in the 621 that I didnt buy yet? Great idea! Thanks! LOL I would prefer to get the Toro SS being they match perfectly but the Simplicity SS looks so much more "beefier", nevermind it has a halogen light and fuel guage! Gonna be a hard decision! I can't say for sure that the engine in your Toro 2 stage will fit in a single stage. Give it a go, do an engine swap. But perhaps a Honda GX200 or GX240 would fit, these are nice compact engines. Not cheap though. I never found the power on the Toro 421QE (or 621QZE) to be lacking. It even surprised me how gutsy it is. If anything, I would like it to be smoother and quieter. Sure, more power would be nice, but that just upsets the balance of the machine. More noise, more vibrations, skittish behavior, no thanks. When it's too much for the SS, then I bring out the 2 stage. Pick the right tool for the job and it's so much more enjoyable. I'm not into modifying anymore. Just don't have the time.
This message was modified Oct 31, 2011 by aa335
|
samdog
Joined: Feb 9, 2010
Points: 55
|
|
Re: What do I do??
Reply #22 Oct 31, 2011 10:26 pm |
|
Gizmos don't move snow. True enough, they don't. But in the this snowpocalypse, I was clearing my driveway in the dark and we had no electric power for the postlamps.
I couldn't have moved snow that night without the large powerful headlight on my Toro 826OE. It also lighted the whole yard as I chainsawed downed tree branches, and I aimed it into the garage when I needed to go in there. Well, I suppose I could have struggled through with a Walmart headstrap light, but it would have been slow. I sure appreciate that big 250 cc powered halogen headlight now.
This message was modified Oct 31, 2011 by samdog
|
|
|