Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > adjusting the friction wheel in the neutral position
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
dlenardu
Joined: Oct 14, 2011
Points: 4
|
 |
adjusting the friction wheel in the neutral position
Original Message Oct 15, 2011 5:20 pm |
|
When i start my snowblower in neutral it has some movement forward.
This message was modified Oct 15, 2011 by dlenardu
|
dlenardu
Joined: Oct 14, 2011
Points: 4
|
 |
Re: adjusting the friction wheel in the neutral position
Reply #4 Oct 16, 2011 10:12 am |
|
26" AMF 5HP Husky JR 13600700 HC2
|
dlenardu
Joined: Oct 14, 2011
Points: 4
|
 |
Re: adjusting the friction wheel in the neutral position
Reply #6 Oct 16, 2011 3:50 pm |
|
When I start the snowblower its in the neutral position, there is no traction lever. It then only inches forword slowly or if I move the arm alittle in neutral it may then stop or inch slowly in reverse. the only lever i have is to ingage the auger.
This message was modified Oct 16, 2011 by dlenardu
|
|
|