Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Auger Rake Removal on Sears

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Majorxlr8n


Location: Freehold NJ
Joined: Aug 6, 2003
Points: 1092

Auger Rake Removal on Sears
Original Message   Jan 30, 2005 2:08 am
I'm in WAY too deep on my latest project/mess - I wish I had never even seen this darned thing...

I have another older Sears 5/22 snowblower (model 536.918200) that is giving me grief with just about everything on it. The engine runs good now (another LONG story) but the impeller shaft has about an INCH PLUS of play fore & aft in the auger gearcase. Well, after heating, beating & air chiselling all day (and with only 2 hours sleep all day long), I finally have the auger assembly separated from the machine. I need to get at least one of the auger "rakes" off so I can inspect the auger gearcase. I have already heated & beated on both of the rakes but they haven't budged. Can anyone suggest any other methods of removal? Hydraulic press perhaps?

Thanks!
Marty

Replies: 1 - 24 of 24View as Thread
Replies: 1 - 24 of 24View as Thread
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42