Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > help-toro snowblower ccr3650
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
rjs1643
Joined: Dec 11, 2010
Points: 1
![]()
|
 |
help-toro snowblower ccr3650
Original Message Dec 11, 2010 11:22 pm |
|
when pulling the cord, it's not engaging with the engine, any advice
This message was modified Dec 11, 2010 by rjs1643
|
trouts2
Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328
![]()
|
 |
Re: help-toro snowblower ccr3650
Reply #5 Dec 14, 2010 8:06 am |
|
rjs1643: "the recoil grabs the flywheel, so those little dogs are working but its not turning over the engine". If that's the case then the flywheel key could be broke. or The rod is broken so the crank and flywheel spinning free with no piston attached.
|
gtp2
Joined: Dec 15, 2010
Points: 1
![]()
|
|
|
Re: help-toro snowblower ccr3650
Reply #6 Dec 15, 2010 3:27 pm |
|
The 3650 has been great, but now shuts off after 10-12 min. No sputtering. It just stops. After cooling off, it starts and runs OK. What might the problem be? Coil or magneto?
Thanks
gtp2
|
|
|
