Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Problems with snow blower not running very well. Took apart carburetor and found a bunch crud in the bowl. Tried cleaning all of the jets and air intakes with cleaner and when I took the float/needle out there was something foreign that was all corroded and in pieces. Is there suppose to be a gasket or a rubber piece that resides in that hole where the needle sits in at the bottom? I sprayed cleaner in there and it's now all washed out. I noticed that after reinstalling the needle with the float that it's now up against the carburetor. Something doesn't seem right. I would greatly appreciate any feedback or help.

Thank you!

Excellent! Thank you for responding back to my posting. I was getting ready to buy a new carb, but feel the challenge to get this fixed on a small budget.

Thanks again!
John