Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Tecumseh OH195sp - Carburetor Problems - on Ariens Snowblower 7524
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
johnbgood
Joined: Nov 25, 2010
Points: 2
|
|
Tecumseh OH195sp - Carburetor Problems - on Ariens Snowblower 7524
Original Message Nov 25, 2010 3:08 pm |
|
Problems with snow blower not running very well. Took apart carburetor and found a bunch crud in the bowl. Tried cleaning all of the jets and air intakes with cleaner and when I took the float/needle out there was something foreign that was all corroded and in pieces. Is there suppose to be a gasket or a rubber piece that resides in that hole where the needle sits in at the bottom? I sprayed cleaner in there and it's now all washed out. I noticed that after reinstalling the needle with the float that it's now up against the carburetor. Something doesn't seem right. I would greatly appreciate any feedback or help. Thank you!
This message was modified Nov 25, 2010 by johnbgood
|
|
|