Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I'm at a loss. I have a Paramount GB350  leaf blower with a 2 cycle Mitubishi engine. I need a priming bulb. My old one is so old it has gotten hard. Does anyone know ware i can get a new one or a new carb assembly?  I cant find any serial # on the engine or any info on the engine or Parmount blowers

That nikki carb/ engine I believe was used on the Toro line of line trimmers of the same year. (about 5 year span) .....  and the tank mounted primer bulb....

The carb is most likely good ,   it just needs new Diaphrams/ gaskets and maybe a needle...   It you take the primer button apart do not loose the parts inside (plastic $#%* and foam and such)....

I will do a little research and see what I can find,  try to take a picture So I can better follow up...

Friiy

Take a look at these links : http://jackssmallengines.com/help.cfm#AssemblyPartsSearch|model_d9MoRLNeA8MAkFKWRhWEsQ==|assembly_as7zA/ZBtriCb2MVUeSFeA==|brand_dSFVgwdT0oMPfsKWPzzq7A== and try this one also: http://jackssmallengines.com/help.cfm#AssemblyPartsSearch|model_d9MoRLNeA8MAkFKWRhWEsQ==|assembly_TinPoVGw2Crw2axBzpV5Xw==|brand_dSFVgwdT0oMPfsKWPzzq7A== The repair parts are typical, the tank may be different but the fuel pipe assy should be the same.... The carb as a whole will not work.... (body jet size, needle size, throat are made for different engine cc and rpm) but the diaphragms / gaskets and needle should be the same... Friiy

Try this link :

http://jackssmallengines.com/help.cfm#AssemblyPartsSearch|model_d9MoRLNeA8MAkFKWRhWEsQ==|assembly_TinPoVGw2Crw2axBzpV5Xw==|brand_dSFVgwdT0oMPfsKWPzzq7A==

and this one...

http://jackssmallengines.com/help.cfm#AssemblyPartsSearch|model_d9MoRLNeA8MAkFKWRhWEsQ==|assembly_as7zA/ZBtriCb2MVUeSFeA==|brand_dSFVgwdT0oMPfsKWPzzq7A==

I found these under Toro TC-3100 line trimmer,  1992 model....at Jacks small engines parts...There are others it this does not look right...

Sorry about the secound post, I am having problems with the Edit/post/link thing today...

Friiy

Friiy

Thanks  for the info. The toro loks very much the same. I cant see the bottom of that unit though. Mine has a drain valve or somthing on the bottom.I'm trying to get my pictures posted. I have them on flicker. I cant seem to get them to post. I will  post them as soon as I figure it out. Again thanks

likely the carb purge line, Hold down the lever and push the primmer till it pees.. There is a toro I am sure that has that.... Friiy

bus708 wrote:
If you're not having any luck with flickr, try imageshack.us  It's been very reliable.

These are pics of my carb.


I can't get flicker to post my pics. Please  copy and paste my url to see my pics.   http://www.flickr.com/photos/bus708/