Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > What is/are the benefits of hydrostatic transmissions ?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
chefwong


Joined: Dec 18, 2004
Points: 175

What is/are the benefits of hydrostatic transmissions ?
Original Message   Nov 10, 2010 1:48 pm
FWIW, I bought my 1st 2 stager - Honda unit - without ever demoing a unit that had Hydrostatic Transmission.
Just short of the fact that it's variable infinite speed, can anyone just give me a laymens primer on the benefits of a Hydrostatic Transmission ?


BTW, how often if any do you do a OCI on the hydro transmission.

I was just surprised how much ~harder~ is is to move when not engadged as opposed to ~regular~ geared transmission.
I was at the local orange borg last night and wheeled the Organge buckets around and they wheel so much with ease...
Replies: 47 - 56 of 59Next page of topicsPreviousNextNext page of topicsAllView as Outline
aa335


Joined: Nov 29, 2008
Points: 2434

Re: What is/are the benefits of hydrostatic transmissions ?
Reply #47   Jan 17, 2011 12:49 pm
MN_Runner wrote:
I am begining to like FD as there is nothing to see or check.  Perhaps that is the hidden beauty of FD.  Hydrostatic transmission was one of the reason why I did not buy HRX217 with that fluid reservior on it.  It would just drive me crazy.

I never got warmed up to the design of the HRX217 mower.  The hydro fluid reservoir didn't bother me.  What bother me about it was the long handles which makes it hard to maneuver around tight areas and turning around, the complicated blade clutch and drive bail arragement, Xenoy plastic deck, and the GC engine.  I don't find the mulch/bag lever useful for me.  It's either bag, or mulch.  Nothing in between. 

Just give me the updated version of the Honda Master HM series, cast aluminum deck, GX engine, chrome handles, and cone clutch drive.  That's all I ask.  Hydros are fine for heavier pieces of equipment, but too complicated and heavy for a walk behind 21" mower.
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: What is/are the benefits of hydrostatic transmissions ?
Reply #48   Jan 17, 2011 12:55 pm
Turning is no issue for me when I had Toro or Honda as my yard is a fairly simple 190' by 120' rectangle.  I just wanted a little more HP since when the grass gets long and wet, the lawnmower makes that terrible sound.
tkrotchko


Location: Maryland
Joined: Feb 9, 2010
Points: 143

Re: What is/are the benefits of hydrostatic transmissions ?
Reply #49   Jan 17, 2011 12:56 pm
MN_Runner wrote:
I am begining to like FD as there is nothing to see or check.  Perhaps that is the hidden beauty of FD.  Hydrostatic transmission was one of the reason why I did not buy HRX217 with that fluid reservior on it.  It would just drive me crazy.


Friction drive is fine, but when used for a couple of hours (probably from water more than heat), my old MTD simply would not drive and I would have to let it sit overnight. But I have no problem inherently with them and I think the design is brilliant. It would not be my deciding factor to choose/not-choose a snowblower. My number 1 thing to choose is reliability in tough conditions, number 2 is availability of parts. Snowblowers take a beating, and I'm of the opinion that you've got to learn to fix it yourself, because they only break when conditions are bad (that is, when your local dealer can't get to you, or vice-versa). So factor in the purchase of the shop manual to the price.
Knee_Biter


Wicked Pissa

Location: just outside of BOSTON
Joined: Dec 14, 2008
Points: 147

Re: What is/are the benefits of hydrostatic transmissions ?
Reply #50   Jan 17, 2011 1:47 pm
Off topic but I have 2 Masters series mowers.  1 Hydrostatic and 1 3 speed.  I have owned Toro, Ariens, Craftsman, Lawnboy, Snapper  and I must say that I would not trade my masters for any other mower.  I use the Hydo all the time  and the 3 spd once in a while. I have used some of the newer Honda models but they are not the same.  aa335 wrote:
I never got warmed up to the design of the HRX217 mower.  The hydro fluid reservoir didn't bother me.  What bother me about it was the long handles which makes it hard to maneuver around tight areas and turning around, the complicated blade clutch and drive bail arragement, Xenoy plastic deck, and the GC engine.  I don't find the mulch/bag lever useful for me.  It's either bag, or mulch.  Nothing in between. 

Just give me the updated version of the Honda Master HM series, cast aluminum deck, GX engine, chrome handles, and cone clutch drive.  That's all I ask.  Hydros are fine for heavier pieces of equipment, but too complicated and heavy for a walk behind 21" mower.


aa335


Joined: Nov 29, 2008
Points: 2434

Re: What is/are the benefits of hydrostatic transmissions ?
Reply #51   Jan 17, 2011 7:17 pm
MN_Runner wrote:
 I just wanted a little more HP since when the grass gets long and wet, the lawnmower makes that terrible sound.

NO self righteous OCD person mow wet and long grass.  Just not in cards.  The cut is terrible!

Homeowner mower doesn't have the oomph to do it.  You need a commercial 32" walkbehind or larger for that.
This message was modified Jan 17, 2011 by aa335
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: What is/are the benefits of hydrostatic transmissions ?
Reply #52   Jan 17, 2011 10:04 pm
it is not an ideal condition but some weeks in summer you have no choice.  Happened to me a few times this summer.
royster


" It is the use of power tools that separates man from animals"

Location: New Brunswick, Canada
Joined: Feb 11, 2011
Points: 284

Re: What is/are the benefits of hydrostatic transmissions ?
Reply #53   Feb 17, 2011 9:27 pm
   I have a CRAFTSMAN Model 52993 ,1450 series B&S engine, 27 inch snow blower . This model is built by Husqvarna and is identical to (except it is red instead of orange)  to the Husqvarna Model.    It has hydrostatic drive, power steering, heated grips,and the  remote chute controls  . This is the best snow blower out there,   The hydrostatic drive is a one lever operation,move it  forward to go forward an backward to go back. It can be operated at  a very low speed, barely moving forward with the engine set at its highest speed so the impeller and augers are turning at their max speed. It is much easier to go through very deep snow  with no reduction in RPM .The power steering enables it to turn in its own tracks  or make gradual steering adjustments. The heated grips are nice when the outside temperature drops.  The remote chute controls are easy to operate , are fast and logically designed. I would highly recommend these models.

Paul7


Joined: Mar 12, 2007
Points: 452

Re: What is/are the benefits of hydrostatic transmissions ?
Reply #54   Feb 17, 2011 10:25 pm
royster wrote:
   I have a CRAFTSMAN Model 52993 ,1450 series B&S engine, 27 inch snow blower . This model is built by Husqvarna and is identical to (except it is red instead of orange)  to the Husqvarna Model.    It has hydrostatic drive, power steering, heated grips,and the  remote chute controls  . This is the best snow blower out there,   The hydrostatic drive is a one lever operation,move it  forward to go forward an backward to go back. It can be operated at  a very low speed, barely moving forward with the engine set at its highest speed so the impeller and augers are turning at their max speed. It is much easier to go through very deep snow  with no reduction in RPM .The power steering enables it to turn in its own tracks  or make gradual steering adjustments. The heated grips are nice when the outside temperature drops.  The remote chute controls are easy to operate , are fast and logically designed. I would highly recommend these models.

Interesting.  I knew that Husqvarna made chain and gear driven blowers but didn't know that they made hydrostatic models.  What is it's throwing distance like?
royster


" It is the use of power tools that separates man from animals"

Location: New Brunswick, Canada
Joined: Feb 11, 2011
Points: 284

Re: What is/are the benefits of hydrostatic transmissions ?
Reply #55   Feb 18, 2011 11:39 am
I would estimate 50-60 feet, depending on the type of snow.   Dry or drifted snow  50-60 feet,   wet slushy snow   25-30 feet..  I live where the houses are about 80-100 ft apart,  There are snowblowers at each house, various makes.  The snow at the sides of my driveway are lower than the others, because I can throw the snow farther, WE now have over   4 feet of snow on the ground, that is where it has not drifted.

snowmachine


Location: Washington State
Joined: Nov 12, 2008
Points: 268

Re: What is/are the benefits of hydrostatic transmissions ?
Reply #56   Feb 21, 2011 9:23 am
The Husky "16530EXL" model has a Hydro.

http://www.husqvarna.com/us/landowner/products/snow-throwers/16530exl/

I've noticed some of the Husky/Craftsman models sold in Canada also have hydros. I have yet to see one being sold in the states though

. Paul7 wrote:

Interesting.  I knew that Husqvarna made chain and gear driven blowers but didn't know that they made hydrostatic models.  What is it's throwing distance like?
This message was modified Feb 21, 2011 by snowmachine


HTTPs://ouppes.com
Replies: 47 - 56 of 59Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.