Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Transporting Snowblowers

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
chefwong


Joined: Dec 18, 2004
Points: 175

Transporting Snowblowers
Original Message   Nov 2, 2010 8:27 am
I know they make ramp kits out there, and less expensive ones that bolt a regular 2x10, etc... The trick in all of them, it to strap the overhanging lip to the tailgate to secure it... With that said, has anyone done transport of any large OPE via just regular wood planks. Is there a method of doing it ~inexpensively~ yet safely ? Or even a plank platform ? I'm looking at 2 stagers and possibly used vs new. Otherwise, I'm inclined to possibly break down a 2 stager down (remove the shoot and handlebars) and the remainder should just fit inside the SUV just fine.
Replies: 5 - 14 of 20Next page of topicsPreviousNextNext page of topicsAllView as Outline
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Transporting Snowblowers
Reply #5   Nov 2, 2010 10:58 am
chefwong wrote:
This is a perfect example why I wanted to add a flatbed to my fleet ;-) I could always just U-Haul it and get their smallest trailer and hook it to the back of my X... Due to the considerably lower height, it might be a better ways to go if I end up needing to haul a SS. I took a look at van rentals but I try to avoid car rentals as much as I can unless I'm on vacay or away on business. Those utility vans get beat up, bad transmissions, etc.

Wow, from a single stage to a 2 stage snowblower, shed, loading ramps, trailers, and now a flatbed truck.  Wooo hoo !  It all started just a few snowflakes.

Plan for the future and get a F350 Super Duty Duallie from the start so you can haul the future garden tractor around.  :)  They make 4WD with heated cab and stereo too.  Just a thought.
Steve_Cebu


Joined: Dec 17, 2009
Points: 888

Re: Transporting Snowblowers
Reply #6   Nov 2, 2010 11:20 am
aa335 wrote:
Wow, from a single stage to a 2 stage snowblower, shed, loading ramps, trailers, and now a flatbed truck.  Wooo hoo !  It all started just a few snowflakes.

Plan for the future and get a F350 Super Duty Duallie from the start so you can haul the future garden tractor around.  :)  They make 4WD with heated cab and stereo too.  Just a thought.


I wonder if chefwong is from New Jersey.....

"If you have more miles on your snow blower than your car, you live in New England."  "If you can drive 75 mph through 2 feet of snow during a raging blizzard without flinching, you live in New England."
chefwong


Joined: Dec 18, 2004
Points: 175

Re: Transporting Snowblowers
Reply #7   Nov 2, 2010 11:30 am
My SUV is pretty poppy. I use it to tow the track rat. Wish I would use it more for utilitarian use like sheet goods and stuff.... Ha, You guys gave mr David a good old flogging. Just because I looked at the wear edge specs of the paddles put's me in the same boat ;-) It was more of figuring out was it ~worth~ even buying aHS621 instead, but then dumping at least $100+ more into it, assuming it was at least a 7 year+ machine and would need the drive belt and paddles changed.
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Transporting Snowblowers
Reply #8   Nov 2, 2010 11:53 am
There are some vague similarities to the self-proclaimed mechanical engineer with vast HVAC theoretical knowledge in need of real world practical experience.  That guy could tell the snow plume mass flow rate from looking at youtube videos.    :)  Amazing talent.  When he gets upsets, everyone is Democrat.

He also got flogging from another forums too.  Well deserved.  Some people over there got whiff of his coming.  He's been a boy scout lately.

Pertaining the HS621, not a good cost analysis if you looking to get one and keep it running.  The rubber parts and other replacement parts are expensive.  But it could end up being a collectible classic.  I'm not going to try to convince you to get a used HS621.  You know if you want one.
This message was modified Nov 2, 2010 by aa335
giocam


Joined: Sep 18, 2010
Points: 74

Re: Transporting Snowblowers
Reply #9   Nov 2, 2010 12:22 pm
Most snowblowers weigh less than 250 pounds or so. Two average men can pick them up and load them into an suv or on a pick up truck fairly easily, no need to spend money on ramps unless you plan on carting your snowblower around often.
drifter


Joined: Oct 13, 2010
Points: 115

Re: Transporting Snowblowers
Reply #10   Nov 2, 2010 2:27 pm
giocam wrote:
Most snowblowers weigh less than 250 pounds or so. Two average men can pick them up and load them into an suv or on a pick up truck fairly easily, no need to spend money on ramps unless you plan on carting your snowblower around often.

Spoken like a fit young fella, who's never had his back go out on him at the least opportune time.
chefwong


Joined: Dec 18, 2004
Points: 175

Re: Transporting Snowblowers
Reply #11   Nov 2, 2010 2:41 pm
My inclination was these originally http://www.northerntool.com/shop/tools/product_15771_15771 I have tons of wood lying around and easily make a platform out of 2x12 stock and then put a ply platform ontop. I was thinking.....I could possibly get the 2 stager, keep it outside in some form or fashion and in the offseason, just get it on the ramps and lug it to my storage facility... I would need ramps if I bought the 2 stager used. Most are generally private sellers. If I bought new, I'm sure the local OPE would do the usual free delivery. I have to check with one of my tuning shops. In his old shop, he converted the loading dock as a drive in bay as well. and bought these beefy alum ramps that were rugged and robust.
This message was modified Nov 2, 2010 by chefwong
chefwong


Joined: Dec 18, 2004
Points: 175

Re: Transporting Snowblowers
Reply #12   Nov 2, 2010 2:45 pm
OT, but how do you get it to keep you formatting ? I am typing in spaces, etc and it just bunches up all the words into 1 single paragraph.
drifter


Joined: Oct 13, 2010
Points: 115

Re: Transporting Snowblowers
Reply #13   Nov 2, 2010 2:50 pm
hit "enter' at the end of your final sentence, to start a new paragraph.
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Transporting Snowblowers
Reply #14   Nov 2, 2010 2:55 pm
chefwong wrote:
OT, but how do you get it to keep you formatting ? I am typing in spaces, etc and it just bunches up all the words into 1 single paragraph.

If you're using Safari browser on a Mac, iPod Touch, iPhone, :) , it will bunch up all the paragraphs.  You can add <BR><BR> at the end of paragraph to start a new one.  Gets old pretty fast.  Ask me how.

This is just punishment for Apple not playing nice with Adobe Flash.  :) 

Try Firefox browser.  It works better.
This message was modified Nov 2, 2010 by aa335
Replies: 5 - 14 of 20Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42