Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Based on recommendations from this forum I purchased an Ariens 8526 in late December. The local dealer, at the time, did not have any in stock, so I bought it at Home Depot.

I read the manual and did the break in procedure. All seemed ok. With about five inches on the ground (I have a large driveway (triple wide garage) and live on a corner lot)), the 8526 traveled, in 1^st gear, about ten feet and then stopped. Wouldn’t move…

Rather than fix the machine, I brought it back to Home Depot and upgraded to the 11528LE (for about $100 more than the 8526).

I also did the break in procedure, and with eight inches of snow on the ground, with drifts up to 28 inches, it took about three minutes of operation before the impeller stopped turning. It squealed like a pig on crack.

I spent four hours going through the manual and checking everything, but couldn’t get it to work. So, I bypassed Home Depot (sick of changing machines), and called the local Ariens service dealer. They picked it up the following day (yesterday), and said that a washer/bolt broke internally but it should work from now on (the person relaying the info didn’t have the specifics, and I hope to track down exactly what the problem is at a later time).

They dropped it back at my house this morning, and I went home over lunch today and removed the snowdrifts that I couldn’t move on Saturday (back pain and ticked off). Today, the temp was about 38 degrees, the 11528 shot the heavy snow about 15-25 feet. I’m guessing this is normal performance for the conditions.

Home Depot, because of two machines not working at no fault of mine, is offering a $25 gift certificate (rather than give me the $$ difference between the price I paid for the 11528 last week and the now clearance price). They say it’s corporate policy to not honor recent purchases against clearance items (only sale items).

Snowblower gurus, what would you do…am I out for blood and needlessly taking on a big corporation by demanding the difference between the price I paid and the clearance price (about $190)? Or, take the $25 gift certificate and call it a lesson learned?

       Congrat's on solving your problem,

Nobody welcomed you here , so I will.

 Welcome to the best forum on the net!!

The reason you did not get a welcome, I think, folks here were to busy trying to help you!!

Welcome again!

                                                                             Fred  

Welcome to the group!

You done GOOOD.

Marc

nice to hear you got the GOOD deal after all.

and also good that you have a good service spot in the unlikley event that you need somthing in 10 or 15 years.

i would say you got the 3 goods...

good machine

good price

good service...

now bring on the snow

good luck.

later chris

Thanks everyone for the great advice and welcomes! I look forward to learning and contributing.

To top it off, tonight I called Home Depot corporate headquarters, for the heck of it, to tell them about the situation, and without me asking for anything they volunteered to mail me an additional $100 gift certificate.

Now, I hope the reason why we’re hearing about Ariens’ factory quality control problems is because there are more owners to report problems…

Cole

                                18 degrees