Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I have an Ariens 928 with a Techumseh Hmsk80-  I want to enhance its performance by slowing it down.  I want the engine to run at full speed for performance , but I want to go slower in first gear.  I here Honda are known to be able to creep and chew up ice.I'm trying to get my Ariens to to the same. I put a 25 lb weight on the bucket to hold it down. Now I need it to go slower. I read of you guys changing pulleys. Ware do you get these pulleys and different belt sizes. I want a smaller pulley for my drive and a slightly bigger one for the auger. Are all belts the same? Is ther anything special in a Snowblower belt other than size. If I change belt sizes I want to know what to look for in quality.

I was just letting him know honda is not the only snowblower that creeps.So dont worry bout my reply AA .

mikiewest wrote:
No problem.  I know that's what you meant to say.

By the way, is there a separate actual creeper gear in that Simplicity of yours?  Or is part of the friction drive?  How do you engage it?  I was down my local Simplicity dealer checking out the Simplicity Pro 28 and could not find the creeper gear, just 1, 2, 3, 4, 5, and reverse detents.    Asked the salesman about the creeper gear and he gave me a blank stare.  :)

Oh yeah, the chute deflector angle lever goes in detents too, not one smooth continuous motion as you mentioned.  Nice machine by the way for $1800, but I think the Deere 1330SE is looking better with more features and since I didn't notice any difference in the C-channel handle stiffness between the two.

Mine is one smooth action and I can lock it at any angle.You must be looking at the newer models Mine has a manual chute rotator and my chute deflector looks like an engine oil dipstick.

That's a nicer set up.  I did not like how stiff it was to get out of those detents on the current model.  Wonder why they changed it?

Their old literature referred to the 1st gear as creeper gear.Now the literature just says 5 forward gears and 2 reverse gears.

Is it safe to say that everybody's 1st gear is creeper gear?  Some do creeps slower or faster than others.

I guess someone would have to get hold of a large frame and a pro simp model and see if 1st gear for the pro is actually slower than the large frames 1st gear.Any volunteers??But I must admit my 1st gear is pretty slow .

aa335 wrote:

My Toro is ok for speed but we will see how it does in 2 feet of snow if it's too fast or not. So far it's good for nasty EOD stuff but that stuff is heavy. The Honda was better at creeping with their hydrostatic tranny. I'd like to see that on the Toro.

mikiewest wrote:
Where's DavidNJ?

David is helping the Gov. of NJ calculate how much their taxes will go up if they build that tunnel the Transportion Secretary is trying to get them to build.Oh and he's conducting that test for me.....Does the Simp Pro actually have a creeper gear lol.Hes looking for a large frame simp to compare it to....