Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Preface: I've have has a HS520. Due to space contraints, etc - I'm not looking at 2 stage. Single stage for the most part is a perfect fit just short of....living on the right side and the plows only plow to the right so I cam constantly getting plowed in... Throw is fine already on the HS520. I was only curios does the 421/221 or even any current models on the market may have a bit more bite on the EOD/overnight plowed snow...

chefwong wrote:

You have snowblower OCD!  

chefwong wrote:
You are suffering from SAS

Snowblower Acquisition Syndrome

It comes in three's.  That's just the way it is.  Don't sell off anything or you'll start the cycle all over again.

chefwong wrote:
This is your original posting. Kind of funny looking at it now...LOL.

chefwong wrote:
Hah, top that. 

What's the first step to recovery?

The 1st step to recovery is to unload that 520 I have...

Not sure if it's the economy or just the seasons.
When I sold my 520 on CL years ago, I got a zillion responses within the hour.

So far, it's been a couple of days and not a single bite.
I may just have to put a Black Friday price on it to move...

Good call on the selling of the used auger Shyrp. That was not even on my radar and it would have gone into the metal recycle bin....

chefwong wrote:
Don't say I didn't warn you.  :)

The only buyers remorse I have is TCO of the 621....
Reminds me like the last time I had custom headlights being made....at the end of the day, I spent (let's just say it cost more than a HS1132)....

The winner is still the HS520AS. $375 + $40 in tolls and gas
The 621, at $300, a short trip but $425+  in parts later just to make this possibly 10+ year old vintage machine on par with the rest of shiny brand new single stagers out there on the market.

And then you have troublemakers on this forum start talking about a even older HS35 and it's got me saying, ooooh , what's that......

chefwong wrote:
Whaccha talkin about Willis???

Don't go there.  Stay away from craigslist.  That's a 20-30 year old model and restoration will leave you broke, not as bad as the last air-cooled Porsche 911.  I know someone who's holding off that project until the economy picks up.

Although if  you have time, patience and space, you can put together one from many donor parts units, or used parts from Ebay.    Did you say you're finishing up a shed?

Time for a powernap. Happy early Tday gents.

Not sure how many 621's ya'll have looked at in your lifetime but in my limited recent search, many were just rustbuckets or had quite some rust for my comfort.
Usual suspect area were the bucket, edges, the bolts that hold the split handlebars, etc. A GOOD telltale sign was the exhaust areas.
Even mild ones with rust in the buckets had quite a bit of rusty bolts & or rusty mufflers...Suprisingly, on the one I picked up, the only trace was the buckets.
It's quite dirty, dusty, leafy, cobwebby but rust free which is a ++++

Anyone happen to know what years the 621 was carried in the USA .
My serial I believe shows it was Revision A of the *electric start* models if I recall when looking at the parts database.

AA-the shed I've been hemming and hawing on deciding on a finish. Went ballz to the wallz. Ordered some great stainless hardware from a boating supply store, etc.....Just got to decide on a @$@$)(( finish.
I really would like paint but it would be like putting a JDM style exhaust on a german car.....

I guess I'll find out soon enough but as it stands, it's only a hairs breath between the center rubber and the bucket.
Does it rub on yours with your new paddles ? Quite a bit of the 621s I looked it had bare steel down where the flat center paddles were but the sides were not down to bare metal ?
I suppose the flat is overhung and sweeps the bucket down the middle clean. On the Ebay link, the centers appears to stick out further than the side paddles. However when I compare them to the HS621 refresh thread, yours seem flush.

You got one of the cleanest 621 I've ever seen, besides the cobwebs and dust.  Based on the serial number, that is at least 10 years old, maybe around 13-14 years old. 

I keep thinking that the husband bought it for the wife to use (hence the electric start).  She hit something hard, got scared, and never ran it again.  It sat in a corner of the garage all of these years.  Those plates that hold down the scraper bar and the nuts has no corrosion on them, the valve cover and muffler looks clean.  Everything seems indicate very low service hours so that GX160 is probably barely broken in.

On my 621, the rubber paddles and augers do not rub against the bucket.  There's a small gap, 1/16" or so.  The center paddles are and should be even with the rubber auger blades. 

I hope you decide soon how to finish your shed.  It's not getting any warmer.  I'd personally would go with stain for the look.