First off, GREAT forum.
I've spent the last few days researching here, and the amount and quality of information is superb.I live in SouthWestern Quebec.(1 hour n/w of Montreal) Our annual snowfall averages around 7 feet. We rarely get storms that'll dump 1 foot of snow, but it does happen.
My driveway is roughly 135' long, double-width, and a "Y" that extends around the front of the house. Total sq. footage of paved surface is over 4000 sq.ft. My driveway has a sloped entry of approximately 15-20 degrees, and 50' long, and the mouth of the entrance is roughly 40' wide. That 40' mouth is a bear to shovel out after the friendly snow-plow dude buries me in.
About me, I'm 62, and just recovering from a back injury which has kept me off work for just over 4 months now. In the past, I've been shoveling the driveway with a snow-scraper. This year, I'm going to buy my first-ever snow-blower.
After reading through many threads here, I realize there are many Ariens fans here. Although I've looked at the Ariens machines in the past, I think I'm going to go with the heavy-duty Troy-Bilt 33" machine. I'm still flexible at this point, and I'm also considering the Ariens 30"/305cc machine, but I intend to purchase by next weekend. (Oct.17th) I'm interested in your comments and opinions.
The Troy-Bilt unit I'm presently looking at has a 357cc OHV PowerMore engine w/electric start, 16" impeller and augers, 16"x6.5" tires, halogen light/hand-warmers, remote chute direction-deflection, and a 4 year warranty, for $1899. CDN. At 379 lbs, it strikes me as being a much more robust machine than the smaller 30" Ariens unit that I'm also considering (305 cc/$1599./245 lbs). Financing for the Troy-Bilt is 0% interest, no payments, no fees, for 1 year. I'm looking for a unit that can throw at least 30', and preferably over 40'. While the Ariens "32" Pro" series looks interesting, it's also $800. more than the Troy-Bilt here in Quebec, with a shorter 3 year warranty.($2699.)
http://www.canadiantire.ca/AST/browse/2 ... ?locale=en
http://www.homedepot.ca/webapp/wcs/stor ... PartNumber
I have no intention to use this machine commercially btw, otherwise, I might consider the Ariens 32" Pro series. The smaller Ariens unit (30") has smaller tires than the Troy-Bilt(15"??), no hand-warmers, manual chute deflection, smaller motor, smaller frame, shorter warranty, smaller augers and impeller, but it's $300. less than the Troy-Bilt. Doesn't seem worthwhile. What do you guys think?
The Troy-Bilts' "PowerMore" 357cc engine is manufactured in China, by the same folks who manufacture Harley-Davidson engines. It has a cast-iron cylinder-sleeve, cast-iron cam-shaft, and forged-steel crank-shaft. I'm presently awaiting confirmation of the16" impeller rotation-speed from MTD..If it's the same as the 12" model, it should be 1123 rpm. That would put it at roughly the same tip-speed as a 14" impeller, turning at 1300 rpm. (roughly 53-54 mph.
Thanks in advance for your input.
Bob
This guy has a HUGE fricken tractor, with a monster blower that has 3 rows of augers.as I recall. Takes him roughly 5 minutes to do the whole yard.