Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > How Big Should an Auger Be?
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
Bill_H
Location: Maine
Joined: Jan 12, 2008
Points: 354
|
|
Re: How Big Should an Auger Be?
Reply #16 Oct 14, 2010 12:38 am |
|
I mean how much snow do they actually get in New Jersey anyway? He'd be fine with a Toro single stage 2 stroke I once did live in NJ and got along fine with a Toro single stage 2 stroke. They're great on wet slush, NJ gets lots of that. As for the original question "How Big Should an Auger Be?" I strongly recommend, based on many years of experience, that it be almost as long as the bucket is wide, but not longer than the width of the bucket.
This message was modified Oct 14, 2010 by Bill_H
Who the hell let all the morning people run things?
|
aa335
Joined: Nov 29, 2008
Points: 2434
|
|
Re: How Big Should an Auger Be?
Reply #17 Oct 26, 2010 5:48 pm |
|
As for the original question "How Big Should an Auger Be?" I strongly recommend, based on many years of experience, that it be almost as long as the bucket is wide, but not longer than the width of the bucket. Can't believe you gave away that trade secret for nothing. I'd hold out for at least a quarter. Amen, it is what it is. Pass me the beer nuts. On a side note, a little birdie to me that DavidNJ is now a reluctant owner of bare bones Sno-Tek 28" snowblower. He's having meaningful discussions with the folks on the "other forum" about shovels, Husqvarna business strategy, and the future of snowblowers.
|
FrankMA
Location: Merrimack Valley/Northeastern Mass
Joined: Jul 1, 2010
Points: 587
|
|
Re: How Big Should an Auger Be?
Reply #18 Oct 26, 2010 6:43 pm |
|
Yeah, DavidNJ is over at MTF. He won't last long there if he behaves the way he did here!
Toro Wheel Horse 522xi GT, Honda HS928TA, Honda HS621AS, Honda HS520A, Toro CCR3000 (work in progress), Honda HS624WA (sold 08/23/2010), Stihl BR550 Backpack Blower, Stihl MS250, McCulloch MS1635, Honda EM6500SX Generator
|
Steve_Cebu
Joined: Dec 17, 2009
Points: 888
|
|
Re: How Big Should an Auger Be?
Reply #23 Oct 27, 2010 12:46 am |
|
Don't worry guys. He is only keeping the Sno-Tek for a couple years until every snowblower has hydrostatic drive then he is going to sell it for $500 and get a hydro.
Also, now he is over analyzing his purchase and is afraid to unload the box from his SUV or open it.
That's really pedantic of him. I mean once you've bought it then go for it and don't look back. Really the guy should have bought a Toro, it did everything he wanted it to and the cost was reasonable. Plus his wife could use it. I mean if my wife can use it then anyone who is 12 years old or older can use one, as my kids were my wifes size when they were 12, except my son he was that size when he was 8 or 9.
The cost was reasonable too. But this just shows how you can over-think something to your own detriment. Also I seriously doubt that all snowblowers will have a hydrostatic drive in 2-3 years. They cost more and are expensive to fix when they break. Nice to use tho.
"If you have more miles on your snow blower than your car, you live in New England." "If you can drive 75 mph through 2 feet of snow during a raging blizzard without flinching, you live in New England."
|
|
|