Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > How Big Should an Auger Be?

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:

DavidNJ

Joined: Sep 25, 2010
Points: 206

How Big Should an Auger Be?
Original Message Oct 11, 2010 9:10 pm

Most sub $1000 snowblowers have 12" augers, usually with 12" impellers. Ariens has 14" augers and impellers on their Deluxe, Platinum, and Professional lines; Simplicity/Deere/Snapper have 14" augers on their large frame and professional models with 12" impellers, Toro has 14" augers with 12" impellers on their PowerMax series. Honda uses 14" augers on its larger models. MTD's Cub Cadet and Sears Professional lines have 16" augers and impellers. However the Husqvarna Crown has 12" augers of a different design.

What is the advantage of a larger auger?

Replies: 36 - 45 of 46

All

View as Outline

Steve_Cebu

Joined: Dec 16, 2009
Points: 888

Re: How Big Should an Auger Be?
Reply #36 Oct 27, 2010 1:24 pm

aa335 wrote:

Well, because the reinforcement adds about .3 pounds of weight to the bucket to keep the nose down, and you can spin that impeller 1 RPM faster. What's wrong with you? Can't you read?

Peogeot figured how to keep the nose of the car down by dangling a 1 pound carrot 3 feet in front of the driver and they now dominate WRC but can't sell a single car in the US. Meanwhile Subaru WRX is no longer in the race because they should really be focusing on selling cars. My decision tree tells me that I should buy the Husqvarna hydrostatic snowblower because no one know how well a ribbon auger works and dealers don't stock it.

Steve, I'm really joking so don't be offended. Sometimes its hard to decipher over the internet.

Yeah, I know you're joking and it's quite funny actually.

I had stated to him many times that you buy a snowblower to blow snow. All those details aren't all that important. Because there are far too many unknown variables between machines.

But I thought Ford with it's 300HP Focus (Europe only) was the dominator in WRC? It changes every year. Even Ken Brock doesn't drive a Subie any more. maybe if it had a hydrostatic ribbon auger it would do better.

"If you have more miles on your snow blower than your car, you live in New England." "If you can drive 75 mph through 2 feet of snow during a raging blizzard without flinching, you live in New England."

aa335

Joined: Nov 28, 2008
Points: 2434

Re: How Big Should an Auger Be?
Reply #37 Oct 28, 2010 7:01 pm

Steve_Cebu wrote:

Not a chance, unless it you bolt on the Turbo Encabulator, Spastic Sigmoid Resonator, 175# on the Snowflakka Scoopula, and Seismic Detonator Diffuser.

This message was modified Oct 28, 2010 by aa335

Steve_Cebu

Joined: Dec 16, 2009
Points: 888

Re: How Big Should an Auger Be?
Reply #38 Oct 29, 2010 5:38 am

aa335 wrote:

Not a chance, unless it you bolt on the Turbo Encabulator, Spastic Sigmoid Resonator, 175# on the Snowflakka Scoopula, and Seismic Detonator Diffuser.

Oh well, sure if you add THOSE to it of course it would be awesome. Don't forget a V8 engine preferably a 426 Hemi Crate motor just to get a wee bit extra throwing distance.

Like this one for example

http://www.ohgizmo.com/2009/01/21/v8-snowblower-can-probably-plow-through-cars-too/

aa335

Joined: Nov 28, 2008
Points: 2434

Re: How Big Should an Auger Be?
Reply #39 Oct 29, 2010 5:58 am

Well, that pretty much answers the question: "How big should it be?"

slinger

Joined: Sep 21, 2010
Points: 158

Re: How Big Should an Auger Be?
Reply #40 Oct 29, 2010 6:21 am

What a beast! Unfortunately we now have been told that our snow throwers are "boring"... The only question left is: How much of the V8 blower's 800 lb weight is on the left track and how much is on the right one?

aa335

Joined: Nov 28, 2008
Points: 2434

Re: How Big Should an Auger Be?
Reply #41 Oct 29, 2010 6:41 am

That all depends if the "loose nut" is on the right side or left side of the engine. Is that uphill or downhill? What is the phase of the moon and Obama's approval rating? Price of crude oil and Apple Ipad profit margin?

In any case, we're going to need a bigger bathroom scale. Do you want the answer in a table form or 500-page dissertation of the Kennedy conspiracy?

This message was modified Oct 29, 2010 by aa335

Steve_Cebu

Joined: Dec 16, 2009
Points: 888

Re: How Big Should an Auger Be?
Reply #42 Oct 29, 2010 11:41 am

aa335 wrote:

Well, that pretty much answers the question: "How big should it be?"

Yep, pretty much.

Steve_Cebu

Joined: Dec 16, 2009
Points: 888

Re: How Big Should an Auger Be?
Reply #43 Oct 29, 2010 11:42 am

slinger wrote:

Well if it's balanced it should be 50/50. Of course we'd need a bathroom scale to be more accurate. LOL

aa335

Joined: Nov 28, 2008
Points: 2434

Re: How Big Should an Auger Be?
Reply #44 Oct 30, 2010 4:29 am

Steve_Cebu wrote:

Well if it's balanced it should be 50/50. Of course we'd need a bathroom scale to be more accurate. LOL

Well, that brings up other questions, "How big should the bathroom scale be?". "What are the advantages of a digital scale?". "Should the LED display blue or red?"

Bill_H

Location: Maine
Joined: Jan 11, 2008
Points: 354

Re: How Big Should an Auger Be?
Reply #45 Oct 31, 2010 7:59 am

But the article doesn't answer the original question ... how big is the auger on that thing? Impeller speed? With that kind of power, it should have a 18"x72" auger, and a 18" impeller at 1800 RPM. Clarence kit, of course. Remote start because by doing your driveway in 2 passes, it won't run long enough to properly warm up, and you'll need it warmed up so that radiator can serve as your heater on those cold days. Maybe nitrous injection for the EOD?

Who the hell let all the morning people run things?

Replies: 36 - 45 of 46

All

View as Outline