Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I have a moderate-sized (maybe 40' x 15') driveway constructed with paving bricks. Additionally, I have a sidewalk I'm responsible for that requires me to trudge across a neighbor's lawn to access (don't ask...). I've been using a Toro electric, but it bogs down terribly in heavier/wetter snow, and the cord makes it impossible to get to the sidewalk, which is more than 100' from an outlet. So this year I'm finally switching to gas, but it seems like I only need a single stage gas blower, since my needs aren't too heavy. There are two I'm considering, the Toro Power Clear 210R, and the Murray 1695537.

The Toro Power Clear 210R is top-rated by Consumer Reports:
http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&productId=100677593&langId=-1&catalogId=10053&ci_src=14110944&ci_sku=100677593&cm_mmc=shopping-_-googlebase-_-D28X-_-100677593&locStoreNum=6204&marketID=191#BVRRWidgetID

The Murray is getting good reviews on Amazon, but reviews elsewhere are difficult to find:
http://www.amazon.com/Murray-1695537-21-Inch-4-Cycle-Stratton/dp/B002JIN6TS/ref=sr_1_1?ie=UTF8&s=hi&qid=1284054991&sr=8-1

I know Toro's a solid brand, but what about Murray? Does anyone know anything about the brand and how the model above compares with the Toro? There's also a lot of specs, too, which I have no idea how to compare. For example:

cc's: Murray 190cc, Toro 141cc
cycles: Murray 4 cycles, Toro 2 cycles

Does this make sense to anyone? Any recommendations/experiences/thoughts?

EDIT: And just to make things even more confusing, how do these compare to the Toro PowerClear 421Q, which appears to have a different engine than the 210R?
http://toro.com/home/snowthrowers/gassinglestage/421Q.html

superbuick wrote:

Thanks for the reply.

I can see the manuverability, less weight, less space. How does it 'clear right down to the pavement'?  Not sure about less maintenance; two strokes have always seemed a bit of a pain to me.

In the first two videos they were using only a portion of the small 20" scoop with a bit of back and forth rocking on what seemed to be 8-10" of powder. Is that typical?

superbuick wrote:
Thanks, superbuick!! Your video was quite helpful and clearly showed how accessible the spark plug is. Eight screws, take off the shroud, then take out the spark plug with a socket wrench. It might just even be simple enough for my level of mechanical ineptitude.

I tried again to start the snowblower last night, and it still refused to start - didn't even begin to catch this time around. My first step's going to take it to a Toro service center, since it's brand new and covered under warranty. I don't want to replace the sparkplug only to have Toro refuse warranty repair because I opened the machine up, but if Toro can't come through, I'll give replacing the spark plug a try.

Thanks again!!

DavidNJ wrote:
re: clearing right down to the pavement, the auger on the single stage blower actually comes into contact with the pavement, which you can kind of see in this picture:
http://www.toro.com/home/images/sn_38584_l_xl.jpg

As for less maintenance, superbuick obviously knows vastly more on this than I do, but I know that for 2-stroke engines, the oil is mixed right in with the gas. As such, there are no oil changes needed - the oil is consumed along with the gas, as opposed to 4-stroke engines, where the oil is in a separate chamber and needs to be drained and replaced every so often.

DavidNJ wrote:

I'll make a video this winter running my 221 through whatever the biggest snow is we get (hopefully not much...I don't like snow....but usually our biggest is 15 inches or so...knock on wood) I couldn't find a great one on youtube other than the honda 621 video, which is a great video. There isn't really anything you can/need to do to a 2 stroke other than running out of gas and fogging it over the summer. Maybe a spark plug every couple of years? 4 strokes need oil changes, and regular ones since the majority of them are not filtered. On a single stage, thats a pain in the neck compared to running it out of gas and fogging it (which also needs to be done to a 4 stroke).

First, that queston mark was an error. My guess is I had a question also on the line and deleted it, getting the punctuation wrong.

Second, 2-strokes used to come big enough to match any of the units out there. The RD350 comes to mind. Why wouldn't they use a 2-stroke on a 2-stage? If it was an emissions issue on the larger ones, many of the 26" and smaller ones have 208cc motors no more powerful than the single stage 2-strokes?

Finally, superbuikck, which Buick(s) do you have? We have a '38 Special trunk-back sedan..

They did have a 2 stroke on a 2-stage - I have one.  A Toro Power Max 726te.  The emissions issue is because of how lean the EPA wants things these days.  The last years of the 2 strokes on mowers and 2 stages were getting to the point where they could barely idle they were so lean.  I don't think there is much longer to go for 2 strokes in single stages either, which is a shame because they are the perfect match for those machines.  If I'm a manufacturer, I'm not going to spend the money developing a 2 stroke for an application I can get an off-the-shelf 4 stroke for.  Any difference in power and maintenance (which in my opinion both favor the 2 stroke) I can simply talk away with clever marketing: "no messy mixing of gas and oil!!!" (because dumping 3 oz of oil into a gas can is somehow less messy than changing the oil on a 4 stroke????) and "no confusing mixing" (which, as you know, is about as confusing as putting the right amount of sugar in your coffee in the morning....).  Problem solved, goodbye 2 strokes, planet saved (well, except for the giant smoke belching coal powerplants, but we need to keep those because, er, our voters dont like nuclear power and without them...uh....we wouldn't be in office...so...uh....yeah...nuclear is bad, chernobyl, bad!) (sorry....getting political here lol)

All the handheld stuff (where a 2 stroke is sort of mandatory for power to weight/size ratio) has had to go to stratocharging and/or catalytic converters.  Sure they could totally redevelop mower and blower engines with that technology but from a business standpoint, why bother?  Just throw a readily available low-end or chinese made 4 stroke on there and charge MORE for it.


Here's a pic of a 2 stroke 2 stage, and it works fantastic...even though I don't use it that much because the single stage works so well :-)

superbuick wrote:

I was under the same impression for the 421QR. The 4 stroke engine on that unit has unknown history, and it costs $100 more, and is heavier. It sounded a bit quieter and as smooth compared to a Honda GX160 engine.

I must admit, every time I see pictures of your snowblowers, I keep thinking this must be a museum of snowblowers. They are immaculate clean, as if they have not seen a single snowflake.

superbuick wrote:
This video is of the Toro 3650 in light fluffy snow, discontinued model, predecessor to the 221/421.  If you're a fan of 2 stroke engines, you'll love the sound.

Here's a good one of the Honda HS621 in deep wet snow and my favorite Honda HS621 SLOW MO

Singles are quite fun to operate.  Simple, nimble, small.  Allows you get close to doors and houses, in between cars, and moves easily around curved walkways.

Just to finish out this thread, for posterity... Got the Toro 221Q running a few days ago with the very patient help of the guy at ValleyPower.com, where I'd ordered the snowblower from. The key points:

1. He told me to lift up the handle so the snowblower was standing up 45 degrees on its auger, then slam the wheels down a couple of times. He said this was to shake loose a possibly stuck needle in the engine(?)
2. Thinking it might be flooded, he told me to turn the choke all the way to the left, i.e. have the choke totally disengaged so that it's not choking the air supply to the carb
   
3. He had me pull 20-25 times

After 15+ pulls, the engine started to sputter a bit, which encouraged me to keep pulling until it started up proper on the 20-25th pull. He'd warned me in advance that it would start smoking like a pig, and, indeed, it did. After working with electric equipment (I had an electric PowerCurve 1800 before this), the snowblower sounded very loud to me, so I shut it off only after a few seconds - it was early and I didn't want to anger the neighbors.

A couple of days later, I got a chance to try it again, and this time I started it up as per the manual's instructions. It took me about 10 pulls, but it started up again, and this time I let it run for a few minutes. The copious smoke cleared away after a minute or two, and maybe I was just more used to it, but it didn't seem to sound as rip-roaringly loud as before. I pulled on the handle to engage the auger, and everything seemed to be running just fine. 10 pulls to start up the blower still seems excessive, but I trust that it will take less pulls as the blower breaks in a bit.

The 221Q is, as people have said, very manueverable, and I have to say that the Quick Shoot, which I initially thought gimmicky, is looking more and more like it'll be a real back saver. The 221Q fits perfectly in my garage and is now ready to go. Looking forward to the snow!!

Billin - thats still way too many pulls. I would suggest no longer priming it. It should start up just fine with only the choke. Mine start with a single pull even after being stored all summer.